keepcalculator

06 Numbers and Powers

Public vs Private IP Address: Key Differences

Card No. 06·81335 · Updated · Standard formula, shown below

This page explains the differences between public and private IP addresses, how each works, and how to find which type your device uses. Public IPs are globally unique and routable on the internet, while private IPs are reserved for local networks and not directly reachable from outside.

What Is a Public IP Address?

A public IP address is a globally unique identifier assigned to a device or network interface that is directly reachable over the internet. It is allocated by regional internet registries (RIRs) to internet service providers (ISPs), who then assign it to customers. Public IPs are used for servers, websites, and any device that needs to be accessed from anywhere in the world.

Because the number of IPv4 addresses is limited (about 4.3 billion), public IPv4 addresses are scarce and often cost extra. Many ISPs use dynamic public IPs that change periodically, while static public IPs (which never change) are typically a paid add-on. IPv6 was introduced to solve the exhaustion problem, offering an almost unlimited number of public addresses.

What Is a Private IP Address?

A private IP address is a non-routable address used only within a local network (LAN). It is not unique globally; the same private IP can be used in millions of different networks without conflict. Devices with private IPs cannot be reached directly from the internet unless a router performs network address translation (NAT).

Private IPs are assigned by a router (usually via DHCP) to devices like computers, phones, printers, and smart TVs. The three IPv4 private ranges were defined in RFC 1918 to allow anyone to use them freely without coordination. IPv6 also has a private range (fc00::/7) for local use, but it is less common because IPv6 provides plenty of public addresses.

Key Differences Between Public and Private IPs

  • Uniqueness: Public IPs are globally unique; private IPs are only unique within their local network.
  • Reachability: Public IPs are reachable from anywhere on the internet; private IPs are hidden behind a router and require NAT for outbound traffic.
  • Allocation: Public IPs are assigned by ISPs; private IPs are assigned by your router or network administrator.
  • Cost: Public IPs are often paid (especially static ones); private IPs are free and unlimited.
  • Security: Private IPs are inherently more secure because they are not directly exposed; public IPs are open to incoming connections unless firewalls are used.
  • Examples: 8.8.8.8 (public DNS), 192.168.1.1 (private router address).

How to Find Your Public and Private IP

To find your public IP, simply search “what is my IP” on a search engine, or visit a website like ifconfig.me. This shows the IP that the internet sees, which is assigned by your ISP.

To find your private IP on Windows, open Command Prompt and type ipconfig. Look for the “IPv4 Address” under your active network adapter. On macOS, go to System Settings > Network and select your connection. On Linux, use ifconfig or ip addr in the terminal.

On a smartphone, you can find the private IP in the Wi-Fi settings, usually under “Network details” or “IP address”.

Common Problems and Misconceptions

“Is 127.0.0.1 a private IP?” No, 127.0.0.1 is the loopback address, which is not part of the private ranges. It always refers to your own device.

“Why does my public IP show a different location?” ISPs often have central gateways in other cities, so geolocation databases may show a nearby city rather than your exact address.

“Can I change my public IP?” Yes, you can restart your modem/router to get a new dynamic IP, or contact your ISP for a static one. You can also use a VPN to hide your real IP.

“Is a private IP secure?” It is not directly exposed to the internet, but it is not inherently secure. If a malicious device is on your local network, it can still attack your private IP.

Frequently Asked Questions

Why are private IP addresses not routed on the internet?

Private IP addresses are not routed because they are not unique. If a packet with a private source address left your network, routers would not know where to send the reply. NAT solves this by translating private addresses to the public IP of your router for outbound traffic.

What is the difference between IPv4 and IPv6 private addresses?

IPv4 private ranges are defined in RFC 1918 (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16). IPv6 uses Unique Local Addresses (ULA) in the fc00::/7 block. ULA addresses are not meant to be routed globally, similar to IPv4 private addresses.

Can two devices on different networks have the same private IP?

Yes, they can. For example, your home router and your neighbor’s router can both assign 192.168.1.1 to their devices. This is fine because the two networks are isolated and NAT separates them.

How do I know if my IP is public or private?

Or check if it starts with 10., 172.16-31., or 192.168. – if so, it is private. Otherwise, it is public.

Can I host a website using my private IP?

No, a website hosted on a private IP is only accessible from within your local network. To make it public, you need a public IP and port forwarding on your router, or use a service like ngrok or a cloud hosting provider.

What is the difference between a static and dynamic public IP?

A static public IP never changes, which is useful for hosting servers or accessing your network remotely. A dynamic public IP is assigned by your ISP and can change periodically, which is fine for regular browsing but can be problematic for remote access.

Conclusion

Understanding public vs private IP addresses is fundamental to networking. Public IPs are your identity on the internet, while private IPs are your identity within your local network.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →