keepcalculator

06 Numbers and Powers

Record Radio on Schedule: How to Set Timed Recording

Card No. 06·72017 · Updated · Standard formula, shown below

File size at 128 kbps 56 MB
File size at 320 kbps
141 MB
Result
Recording length
60 min
You entered
You enter
Recording length
You get
File size at 128 kbps, File size at 320 kbps
Rounding
0 dp

Yes, you can record radio on a schedule, and the method depends on whether you are capturing over-the-air broadcasts or internet streams. For FM/AM radio, you need a receiver with a timer or a computer with a tuner and scheduling software; for internet radio, you can use a media player with a scheduler or a dedicated recording app. This article explains the practical options, what you need, and how to set up reliable timed recordings.

Formula

File size (in megabytes) = bitrate (in kbps) × time (in seconds) ÷ 8 ÷ 1024. The 8 converts bits to bytes, and 1024 converts bytes to kilobytes (then to megabytes). For a recording length dur in minutes:

Size (MB) = dur × bitrate (kbps) × 60 ÷ 8 ÷ 1024

Variables:

  • dur – recording duration in minutes (input)
  • bitrate – audio bitrate in kilobits per second (common values: 128 kbps for standard FM-quality internet streams, 320 kbps for high-quality streams)
  • Size – resulting file size in megabytes (output)

Worked Example

Using the default values: recording length = 60 minutes, bitrate = 128 kbps.

  1. Convert minutes to seconds: 60 × 60 = 3600 seconds
  2. Multiply by bitrate: 3600 × 128 = 460,800 bits
  3. Convert to bytes: 460,800 ÷ 8 = 57,600 bytes
  4. Convert to kilobytes: 57,600 ÷ 1024 = 56.25 KB
  5. Convert to megabytes: 56.25 ÷ 1024 = 0.0549 MB

Wait – that’s per second. For the full hour: 0.0549 MB/s × 3600 s = 197.6 MB. The calculator’s formula (dur × 128 / 8 / 1024 × 60) gives 60 × 128 / 8 / 1024 × 60 = 56.25 MB? Let’s check the units: the formula multiplies by 60 (minutes) at the end, but the division by 1024 is per second. The correct formula should be: dur (min) × 60 (sec/min) × bitrate (kbps) ÷ 8 (bits/byte) ÷ 1024 (KB/MB). That is 60 × 60 × 128 ÷ 8 ÷ 1024 = 56.25 MB. The calculator’s expression is dur * bitrate / 8 / 1024 * 60, which equals 60 * 128 / 8 / 1024 * 60 = 56.25 MB. Yes, that matches. So a 60-minute recording at 128 kbps is 56.25 MB.

At 320 kbps, the same hour would be 60 × 60 × 320 ÷ 8 ÷ 1024 = 140.6 MB.

Why Schedule Radio Recordings?

People schedule radio recordings for many reasons: catching a weekly show that airs while they are at work, archiving a live concert, recording a news bulletin for later reference, or building a personal library of a favorite program. Without scheduling, you would have to be at the radio at the exact start time and manually press record – which is impractical for overnight or early-morning broadcasts.

Automated recording solves this by letting the device start and stop at preset times, even when you are away. This is similar to how DVRs record TV, but for audio.

How Scheduled Recording Works

All scheduled recording systems share the same basic principle: a timer triggers the start and stop of an audio capture. The difference lies in the source:

  • Over-the-air (FM/AM): A tuner receives the signal, and the recording software or hardware captures the audio output. The timer must turn on the tuner and the recorder at the right time.
  • Internet stream: The computer or device connects to a streaming URL at the scheduled time, buffers the audio, and writes it to a file. The timer must launch the streaming client and start the recording.

For both, you need a reliable clock on the recording device. If the device sleeps or shuts down, the recording will not happen. Many dedicated radio recording apps run as background services and wake the system from sleep if configured correctly.

Choosing a Method: Hardware vs. Software

Your best option depends on your source and your comfort with technology.

Hardware Recorders

Some portable digital recorders (like those from Zoom or Tascam) have a timer function that can start recording at a set time. You connect the radio’s headphone or line-out to the recorder’s input, set the timer, and leave it. These are reliable but require the radio to be on at the scheduled time – many radios have their own timers or you can use a plug-in timer to power the radio.

Software for Internet Radio

For internet streams, free and paid applications like StreamWriter, RadioBOSS, or RarmaRadio allow you to schedule recordings by entering the stream URL and the start/stop times. They run in the background and save MP3 or WAV files directly. Some also support recording from a microphone or line-in, which covers FM if you have a tuner with an audio output.

Software for FM/AM via Computer

If you have a USB FM tuner (like a RTL-SDR dongle or a dedicated tuner stick), you can use software like SDR# or GQRX to tune and record, but scheduling is not built into most of these. You would need to combine them with a task scheduler (like Windows Task Scheduler) to run a command-line recording script at the right time. This is more technical but gives full control.

Step-by-Step: Scheduling with a Typical App

While each app differs, the general process is:

  1. Find the stream URL of the radio station (often on the station’s website or via a directory like TuneIn).
  2. Install a recording app that supports scheduling (e.g., StreamWriter, RarmaRadio, or Audacity with a macro – though Audacity’s macro scheduling is limited).
  3. In the app, create a new scheduled task: enter the stream URL, the start date/time, the duration, and the output file name and folder.
  4. Set the app to run in the background and keep the computer awake (disable sleep or use a power plan that prevents sleep during recording).
  5. Test with a short 1-minute recording to verify the file is created and playable.

For FM/AM with a hardware recorder, the steps are: connect the recorder to the radio’s audio output, set the recorder’s timer (if available), or use an external plug-in timer to power the recorder and radio at the desired time.

Common Problems and How to Avoid Them

  • Computer sleeps or shuts down: This is the most common failure. In Windows, go to Power Options and set “Sleep” to “Never” while plugged in, or use a “High Performance” plan. On macOS, use the Energy Saver settings to prevent sleep.
  • Stream URL changes: Radio stations sometimes change their stream URLs. If the recording fails, check the station’s website for a new URL.
  • Time zone errors: The app uses your computer’s clock. Make sure the time zone is correct, especially if you travel or if the station is in another time zone – schedule using local time.
  • File size too large: Higher bitrates give better quality but larger files. Use the calculator above to estimate. For a 1-hour show at 128 kbps, you need about 56 MB of free disk space.
  • Silence at start/end: Some stations have a few seconds of silence or jingles. Set the recording to start 1–2 minutes early and end 1–2 minutes late, then trim the file later.

Costs and Legal Considerations

Free software options exist (e.g., StreamWriter has a free version, Audacity is free), but they may have limitations like watermarks or lack of scheduling. Paid apps typically cost $20–$50 one-time and offer more reliable scheduling, automatic tagging, and better file management.

Legally, recording radio for personal, non-commercial use is generally accepted in many countries, but redistributing recordings may infringe copyright. Check your local laws and the station’s terms of service.

Alternatives to Scheduled Recording

If scheduling is too complex, consider these alternatives:

  • Podcasts: Many radio shows are released as podcasts after airing. You can subscribe and download them at your convenience without any scheduling.
  • Station archives: Some stations offer on-demand replays of recent shows on their websites.
  • Cloud DVR services: Some internet radio platforms (like TuneIn Premium) offer cloud recording of certain stations, so you don’t need your own device to be on.

Frequently Asked Questions

Can I record FM radio with just my computer and no extra hardware?

No, a standard computer does not have an FM tuner built-in. You need a USB tuner dongle or an external receiver that connects to the computer’s audio input. Many USB dongles are inexpensive and work with software like SDR#.

How do I find the stream URL for a radio station?

Open the station’s website, look for a “Listen Live” button. Right-click on it and select “Copy link address” – that is often the stream URL. Alternatively, use a directory like TuneIn or Radio Browser, which list direct stream URLs.

Does scheduled recording work if my computer is in sleep mode?

Not usually. The recording app cannot run while the system is asleep. You must either disable sleep or use a feature like Windows Task Scheduler’s “Wake the computer to run this task” option, which may work if the computer supports it.

What file format should I choose for radio recordings?

MP3 at 128 kbps is a good balance of quality and size for talk radio. For music, use 192 or 320 kbps. WAV is lossless but creates huge files – not recommended for long recordings unless you have plenty of disk space.

Can I record multiple stations at the same time?

Yes, with most internet radio recording apps, you can schedule multiple recordings simultaneously as long as your internet connection and CPU can handle the load. Each recording uses a small amount of bandwidth (about 16 KB/s per 128 kbps stream) and minimal CPU.

Why did my recording stop halfway through?

This often happens due to a dropped internet connection, the stream URL becoming invalid, or the computer going into sleep mode. Check the app’s log or error messages. Also ensure your internet is stable and the station’s stream does not have a timeout.

Related

Formula used
in dur | Recording length | min | 60 | 1 | 1440
out size | File size at 128 kbps | MB | dur * 128 / 8 / 1024 * 60 | 0
out size320 | File size at 320 kbps | MB | dur * 320 / 8 / 1024 * 60 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →