Redmi Smart TV X Series Launch: Full Details

The Redmi Smart TV X series was launched in India on March 17, 2020, with three screen sizes: 50-inch, 55-inch, and 65-inch. It was positioned as a premium 4K HDR smart TV with a 94% screen-to-body ratio, Dolby Vision, and a 10-bit panel, all at an aggressive price point.

Why the X Series Matters

The X series was Redmi’s first foray into the premium smart TV segment in India, following the success of its budget-friendly Redmi TV 32-inch and 43-inch models launched earlier in 2020. The X series aimed to undercut established brands like Sony, LG, and Samsung by offering flagship-level features at a mid-range price. It was also one of the first TVs in India to ship with Android TV 9.0 out of the box, with a promise of an upgrade to Android TV 10.

Key Specifications and Features

The Redmi Smart TV X series came with a 4K (3840 x 2160) resolution display, supporting HDR10, HLG, and Dolby Vision. The 55-inch and 65-inch models featured a 10-bit panel (8-bit + FRC) with 93% DCI-P3 color gamut, while the 50-inch model had a 8-bit panel. All models had a 60Hz refresh rate, 178-degree viewing angles, and a 400 nits peak brightness. The TV was powered by a MediaTek MT5891 chipset with a Mali-G51 GPU, paired with 2GB of RAM and 16GB of internal storage. It had dual-band Wi-Fi, Bluetooth 5.0, and three HDMI ports (one with ARC), two USB ports, and an Ethernet port. The audio was handled by a 30W speaker system (two 15W drivers) with support for Dolby Audio and DTS-HD.

Software and User Experience

The X series ran on Android TV 9.0 with a custom PatchWall interface on top. PatchWall offered a content-first UI with rows of recommendations from various streaming apps like Netflix, Amazon Prime Video, and Disney+ Hotstar. It also supported Google Assistant and Chromecast built-in, allowing users to cast content from their phones. The TV received the Android TV 10 update later in 2020, bringing a more refined interface and improved performance. However, the custom UI was sometimes criticized for being cluttered, and some users reported occasional lag in the interface.

Price and Availability

At launch, the pricing was a major talking point. The 50-inch model was priced at ₹29,999, the 55-inch at ₹34,999, and the 65-inch at ₹54,999. These prices were significantly lower than comparable 4K TVs from other brands, making the X series a value-for-money proposition. The TV was available through Mi.com, Amazon India, and Flipkart, with regular flash sales. Later, Redmi also introduced a 43-inch variant priced at ₹24,999, though it had a slightly different panel (8-bit) and lacked the 10-bit color depth.

Comparison with Competitors

At its price point, the Redmi Smart TV X series competed directly with the Hisense A71F series, the Vu Premium 4K series, and the TCL P715 series. The X series offered a better color gamut and Dolby Vision support, which were often missing in similarly priced models. However, it lacked features like Variable Refresh Rate (VRR) and ALLM (Auto Low Latency Mode) that some gaming-focused TVs had. The 60Hz panel was also a limitation for next-gen console gaming, as the Xbox Series X and PlayStation 5 support 120Hz output. For most users, the X series was a solid choice for streaming and casual gaming, but hardcore gamers might have looked elsewhere.

Common Problems and Solutions

Some users reported issues with the Redmi Smart TV X series, including:

Wi-Fi connectivity drops: This was often resolved by updating the TV’s firmware or resetting the network settings.
Remote control pairing issues: The Bluetooth remote sometimes failed to pair; holding the ‘Home’ and ‘OK’ buttons together for a few seconds usually fixed it.
Screen uniformity issues: A few users noticed light bleeding or uneven backlighting, which is common in edge-lit LED TVs. This could be minimized by adjusting the backlight level in the picture settings.
Audio sync problems: Some users experienced audio lag when using ARC or Bluetooth headphones. Switching to a different audio output or disabling the ‘Audio Delay’ option in settings often helped.

If you encounter persistent issues, a factory reset (Settings > Device Preferences > Reset) is a reliable troubleshooting step.

Frequently Asked Questions

Does the Redmi Smart TV X series support 120Hz?

No, all models in the X series have a 60Hz panel. This means they cannot display 120Hz content, which is a feature of some higher-end TVs. For most streaming and regular TV viewing, 60Hz is perfectly adequate.

Can I install third-party apps on the Redmi Smart TV X series?

Yes, since it runs on Android TV, you can sideload APK files from a USB drive or use the built-in Play Store to install compatible apps. You may need to enable ‘Install unknown apps’ in the security settings.

Does the TV have a built-in tuner for cable TV?

Yes, the Redmi Smart TV X series includes a built-in tuner for DVB-T2, which supports both digital and analog cable connections. You can connect your cable set-top box via HDMI or use the RF input for direct cable connection.

Is the Redmi Smart TV X series good for gaming?

It is decent for casual gaming thanks to its low input lag (around 10-15ms in Game mode) and support for HDR. However, it lacks VRR and 120Hz, so it is not ideal for competitive or next-gen console gaming at high frame rates.

How do I get the Android TV 10 update?

The update was rolled out over-the-air in late 2020. To check for it, go to Settings > Device Preferences > About > System Update. If the update is available, it will download and install automatically. If you haven’t received it, try a manual check or contact Xiaomi support.

Does the TV support Dolby Atmos?

The TV supports Dolby Audio and Dolby Atmos pass-through via HDMI ARC/eARC, but the built-in speakers do not support Atmos. To experience Atmos, you need to connect a compatible soundbar or AV receiver.

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →