keepcalculator

06 Numbers and Powers

Rufus vs Etcher: Which USB Flasher Is Better?

Card No. 06·81575 · Updated · Standard formula, shown below

Rufus and Etcher are both free tools for writing disk image files to USB drives, but they serve different primary audiences. Rufus is the better choice for most Windows users because it is faster, offers more advanced options, and handles Windows installation media flawlessly; Etcher is the better choice for cross-platform users and those who want a simple, foolproof interface. This article compares the two in depth so you can pick the right tool for your specific task.

Background: What Each Tool Is

Rufus is a Windows-only utility first released in 2011 by Pete Batard. It was designed to create bootable USB drives from ISO images, with a heavy focus on Windows installation media, though it also supports Linux distributions and other bootable images. Its development was driven by the need to create Windows 7 USB installers from a Mac, but it quickly grew into a general-purpose flashing tool.

Etcher, originally developed by the resin.io team (now balena) and first released in 2016, is a cross-platform tool that runs on Windows, macOS, and Linux. It was built with a clean, modern interface and a strong emphasis on preventing accidental writes to the wrong drive. Etcher is especially popular in the single-board computer community for flashing Raspberry Pi and other ARM board images to SD cards and USB drives.

How They Work: Under the Hood

Both tools write raw disk images to a target drive, meaning they copy the image byte-for-byte to the storage device, overwriting its entire contents. This is different from a file copy, which just puts files onto a drive. Raw writing is required for bootable media because the bootloader and partition table must be in specific locations on the disk.

Rufus uses the Windows API for low-level disk access and its own custom implementation for writing and verifying data. It supports multiple write modes, including ISO mode (which extracts the ISO’s contents and makes them bootable) and DD mode (which writes the ISO as a raw image). Rufus also offers advanced options like partition scheme selection (MBR vs GPT), file system selection (FAT32, NTFS, UDF), cluster size, and the ability to set a volume label.

Etcher uses a simpler approach: it always writes in raw/DD mode, meaning it copies the image exactly as-is to the drive. It automatically detects the image format (including compressed formats like .gz and .zip) and decompresses on the fly. Etcher also performs a post-write validation step by default, reading back the written data and comparing it to the source image to ensure integrity.

Key Differences: Speed, Interface, and Features

  • Speed: Rufus is generally faster than Etcher because it uses a more efficient write algorithm and doesn’t perform a full read-back verification by default. In independent tests, Rufus often finishes writing a 4GB ISO in 2-3 minutes, while Etcher takes 4-5 minutes on the same hardware.
  • Interface: Etcher has a three-step wizard (Select image, Select drive, Flash!) that is extremely easy to follow, even for beginners. Rufus has a single window with many dropdowns and checkboxes, which can be intimidating but gives power users fine control.
  • Cross-platform: Etcher runs on Windows, macOS, and Linux. Rufus is Windows-only. If you need to flash a drive from a Mac or Linux machine, Etcher is your only option among these two.
  • Windows installation media: Rufus has special handling for Windows ISOs, allowing you to create bootable USB drives that work with UEFI and BIOS, and even bypass Windows 11 TPM checks. Etcher can write Windows ISOs in raw mode, but the resulting drive may not boot on all systems because it lacks the proper partition setup.
  • Validation: Etcher always verifies the write by default. Rufus offers a “Check device for bad blocks” option, but it is not a full read-back verification; it scans the drive for physical defects rather than comparing data.

How to Choose: Which One Should You Use?

Your choice depends on your operating system and your specific task.

  • If you are on Windows and want to create a bootable Windows USB drive: Use Rufus. It is the only one of the two that reliably produces bootable Windows installers, and it offers options like FAT32 vs NTFS that matter for UEFI vs BIOS compatibility.
  • If you are on Windows and flashing a Linux ISO or a Raspberry Pi image: Both work, but Rufus is faster and gives you more control. Use DD mode in Rufus for raw images like Raspberry Pi OS.
  • If you are on macOS or Linux: Use Etcher. Rufus doesn’t run on those platforms. Etcher’s simple interface works identically across all three OSes.
  • If you are a beginner or want a foolproof experience: Use Etcher. Its three-step wizard and automatic validation make it nearly impossible to make a mistake. Rufus’s many options can confuse newcomers.

Common Problems and Misconceptions

Misconception: “Etcher is slower because it’s worse.” Etcher’s speed difference is partly due to its built-in validation step, which reads the entire drive back after writing. This is a safety feature, not a flaw. If you disable validation in Etcher’s settings, it becomes much faster, though still slightly slower than Rufus on most systems.

Problem: “I flashed a Windows ISO with Etcher and it won’t boot.” This is a common issue. Etcher writes the ISO in raw mode, which doesn’t create the correct partition structure for a bootable Windows USB. Rufus, when it detects a Windows ISO, automatically switches to its ISO mode and sets up the proper bootloader. If you must use Etcher for Windows, you need to extract the ISO contents to a FAT32-formatted drive manually, but that often fails for files larger than 4GB.

Problem: “Rufus says ‘Device is not ready’ or ‘Access denied’.” This usually means the USB drive is in use by another program, or you don’t have administrator privileges. Close any file explorer windows showing the drive, and right-click Rufus and select “Run as administrator.”

Cost and Safety

Both Rufus and Etcher are completely free and open source. Rufus is licensed under GPL-3.0, and Etcher is licensed under Apache-2.0. There are no paid tiers, no ads, and no data collection. You can download both from their official websites or GitHub repositories.

Safety-wise, both tools are safe to use, but they are also powerful: they can erase any drive you point them at. Etcher automatically hides internal drives by default, requiring you to explicitly show them, which prevents accidental overwrites of your system disk. Rufus shows all drives, so you must be careful to select the correct one. Always double-check the drive letter and capacity before clicking Start or Flash. Both tools will warn you that all data on the target drive will be destroyed.

Alternatives to Consider

If neither tool suits your needs, there are other options:

  • Ventoy: Instead of flashing a single ISO, Ventoy installs a boot menu on the USB drive, allowing you to copy multiple ISO files onto it and choose which to boot. It’s great for multi-boot drives.
  • balenaEtcher’s CLI: If you want Etcher’s reliability in a command-line interface, balena offers a CLI version for advanced users.
  • dd (Linux/macOS): The built-in dd command can write images, but it’s dangerous and has no safety checks. Use it only if you’re comfortable with the command line.
  • UNetbootin: An older tool that can create bootable Linux USBs, but it’s less reliable with modern UEFI systems.

Frequently Asked Questions

Can I use Rufus on a Mac? No, Rufus is Windows-only. If you’re on a Mac, use Etcher or the built-in dd command.

Why does Etcher take longer than Rufus? Etcher verifies the write by default, which reads the entire drive back and compares it to the source. This doubles the time. You can disable validation in Etcher’s settings to speed it up.

Which is better for flashing a Raspberry Pi image? Both work, but Etcher is often recommended because it automatically validates the write and has a simpler interface. In Rufus, you need to select DD mode for raw images like Raspberry Pi OS.

Can I create a bootable Windows USB with Etcher? Technically yes, but the resulting drive may not boot on all systems. Rufus is specifically designed for this and is the recommended choice for Windows installation media.

Is it safe to use Rufus or Etcher? Yes, both are safe and open source. The main risk is selecting the wrong drive and erasing it. Always double-check the target drive before flashing.

Do these tools work with SD cards? Yes, both Rufus and Etcher can write to SD cards if they are connected to your computer via a card reader. They treat SD cards the same as USB drives.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →