The Russell Hobbs RHC570 is a 2.4 kW electric kettle with a 1.7-liter capacity, a concealed stainless steel heating element, and a 360° cordless base. Its specifications point to a mid-range, fast-boiling kettle designed for households that need large volumes of hot water quickly, with safety features like boil-dry protection and auto shut-off.
What the RHC570’s Specs Mean
The RHC570 is a typical 2.4 kW kettle. In the UK and Europe, most kettles are rated between 2.2 and 3 kW, and 2.4 kW is a common sweet spot. It draws about 10.4 amps on a 230 V supply, which is within the capacity of a standard 13 A UK socket. The 1.7-liter capacity is the standard for family kettles—enough for about 8 cups of tea (using a 200 ml mug).
The concealed element is a practical feature: it hides the heating coil under a flat stainless steel base, making the kettle easier to descale and less likely to accumulate limescale in hard-to-reach spots. The 360° cordless base means you can lift the kettle and set it down at any angle, which is convenient for left-handed users or when the kettle is used in a crowded kitchen.
How the RHC570 Works
Like all electric kettles, the RHC570 uses a resistive heating element. When you switch it on, electricity flows through the element, which heats up due to its resistance. The heat is transferred to the water through the stainless steel floor. A thermostat senses the steam produced as the water boils and trips a switch to cut power, preventing the kettle from boiling dry.
The 2.4 kW rating tells you how quickly it can heat water. In theory, heating 1 liter of water from 20°C to 100°C requires about 0.093 kWh. At 2.4 kW, that would take about 2.3 minutes if all energy went into the water. In practice, heat losses and the kettle’s own mass mean it takes longer—typically 2.5 to 3.5 minutes for a full 1.7 liters. The RHC570’s actual boil time will vary with the starting water temperature, the amount of water, and the voltage.
How to Choose a Kettle: What to Look For
When comparing kettles like the RHC570, consider these factors:
- Capacity: 1.7 L is ideal for 4+ people. If you only make one cup at a time, a 1 L kettle will boil faster and use less energy.
- Power rating: Higher wattage (2.4–3 kW) boils faster, but check your home’s wiring. In the UK, 3 kW is near the limit for a standard socket.
- Materials: Stainless steel interiors are durable and don’t leach plastic taste. Plastic bodies are lighter and cheaper but can retain odors.
- Safety features: Auto shut-off and boil-dry protection are essential. Look for a kettle that switches off automatically when the water boils and when it’s empty.
- Limescale filter: A removable filter in the spout catches scale particles. The RHC570 has one, which is a plus in hard-water areas.
- Water level window: A clear window or scale on the side helps you fill only what you need, saving energy.
Common Problems and Misconceptions
“A 3 kW kettle always boils faster than a 2.4 kW one.” Not necessarily. The actual boil time depends on the volume of water and the efficiency of the kettle. A 3 kW kettle will heat the same amount of water faster, but if you only boil one cup, the difference is seconds. Also, a 3 kW kettle may trip a circuit breaker if other appliances are on the same circuit.
“Boiling water twice is bad for you.” This is a common myth. Reboiling water does not make it toxic. The only concern is that if the water has been sitting, dissolved gases escape, and the taste may be flat. There is no health risk.
“The RHC570 is noisy.” All kettles make noise as the water heats and bubbles form. Some are quieter than others, but the RHC570 is not notably loud. The noise is due to cavitation—bubbles forming and collapsing—which is normal.
“A kettle with a higher wattage uses more electricity.” It uses more power (watts), but because it boils faster, the total energy (watt-hours) is roughly the same. The energy needed to heat a given volume of water is fixed; the wattage only affects how quickly that energy is delivered.
Cost and Energy Efficiency
Boiling a full 1.7 L kettle costs about 2–3 cents (US) or 1–2 pence (UK) per boil, depending on your electricity rate. The RHC570’s 2.4 kW rating means it’s not the most powerful kettle, but it’s efficient enough for most homes. To save energy:
- Only boil the amount you need.
- Descale regularly—limescale insulates the element, making it less efficient.
- Use a kettle with a clear water window so you don’t overfill.
If you’re comparing the RHC570 to a 3 kW model, the difference in boil time for a full kettle is about 30 seconds. The energy cost difference is negligible.
Safety and Maintenance
The RHC570 includes standard safety features: automatic shut-off when boiling, boil-dry protection (it won’t heat if there’s insufficient water), and a cool-touch handle. To keep it safe:
- Never fill above the max line (1.7 L) or below the min line (about 0.5 L).
- Don’t open the lid while water is boiling—steam can scald.
- Place the base on a flat, dry surface.
- Descale monthly with a citric acid solution or a commercial descaler. Follow the instructions—don’t use vinegar if the manufacturer advises against it.
If the kettle stops working, check the base connection and the power cord first. If it still doesn’t work, the thermostat or element may be faulty—that’s not a DIY fix; contact a qualified technician.
Alternatives to the RHC570
If you’re shopping for a kettle, consider these types:
- Temperature-controlled kettles: These let you select a target temperature (e.g., 80°C for green tea). They cost more but are useful for tea enthusiasts.
- Gooseneck kettles: These have a narrow spout for precise pouring, popular for pour-over coffee. They’re usually smaller (0.8–1 L) and slower to boil.
- Stovetop whistling kettles: No electricity needed, but they require a stove and take longer.
- Instant hot water dispensers: These heat water on demand and can be more energy-efficient if you use hot water frequently.
The RHC570 sits in the standard category: reliable, fast enough, and affordable. It’s a good choice if you want a no-frills kettle that does the job.
Frequently Asked Questions
Is the Russell Hobbs RHC570 dishwasher safe?
No, the kettle body and base should not be submerged in water or placed in a dishwasher. Only the removable limescale filter may be rinsed under a tap. Wipe the exterior with a damp cloth.
How long does the RHC570 take to boil?
With 1.7 liters of cold water, it typically takes about 3 to 4 minutes. The exact time depends on the starting water temperature and your home’s voltage. A full kettle from room temperature will be at the longer end.
Can I use the RHC570 on a 110 V supply?
The RHC570 is designed for 220–240 V AC. Using it on 110 V will result in very slow boiling (about half the power) and may damage the kettle. Check the voltage rating on the base. If you’re in a 110 V region, look for a kettle rated for that voltage.
Why does my kettle turn off before the water boils?
This usually happens if the kettle is overfilled (water touches the lid and triggers the steam sensor) or if there’s a buildup of limescale on the element. Descale the kettle and ensure you’re not filling above the max line.
Does the RHC570 have a keep-warm function?
No, the RHC570 is a standard kettle. It boils water and switches off. It does not keep water warm. If you need a keep-warm feature, look for a temperature-controlled kettle with a hot-hold function.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Arctic Sea Ice Forecasts Disagree: What to Do
- MySQL Workbench to VPS: SSH Tunnel Setup
- Bluesky Beginners Guide: How to Get Started5.00 min/km
- LG V20 Won’t Turn On? Fixed
- Snagit vs Camtasia: Which One Do You Need?
- Scale a Small Business Without Losing Culture