If your Samsung Galaxy On7 (2016) with model number G610F is locked on the Google account verification screen after a factory reset, you need a way to remove the Factory Reset Protection (FRP) lock. This guide explains the legitimate methods to bypass FRP on the G610F, including using the device’s own settings, Samsung’s official ‘Find My Mobile’ service, and third-party tools, along with important safety warnings.
What Is FRP and Why Does It Lock the G610F?
Factory Reset Protection (FRP) is a Google security feature introduced with Android 5.1 Lollipop. When you set up a Google account on a phone, the device remembers that account. If someone performs a factory reset without removing the account first, the phone will ask for the previous Google account credentials during the initial setup. This is designed to stop thieves from wiping and reselling stolen phones.
On the Samsung G610F (Galaxy On7 2016), FRP is triggered after a reset done from the Settings menu, a hard reset via recovery mode, or a reset via ‘Find My Mobile’. The lock appears as a ‘Verify your account’ screen that asks for the email and password of the last synced Google account. Without those credentials, the phone is essentially unusable.
Before You Start: Know Your Phone’s Firmware
The G610F runs Android 6.0.1 Marshmallow out of the box, but Samsung later pushed Android 8.1 Oreo updates. The FRP bypass method that works depends heavily on the Android version and the security patch level. Older firmware (2016-2017) has known loopholes in the setup wizard, while newer patches close them.
- Android 6.0.1: Several setup wizard exploits exist, such as using the ‘Emergency call’ or ‘Camera’ shortcuts to reach settings.
- Android 7.0/7.1: Some methods involve the ‘Secure Folder’ or ‘Dual Messenger’ apps during setup.
- Android 8.1: Most old exploits are patched; official methods or paid tools are usually required.
Check your current firmware by looking at the ‘Baseband version’ in the ‘About phone’ section (if you can access it) or by checking the ‘Security patch level’ on the lock screen. This determines which of the following methods will work.
Method 1: Use Samsung’s Official ‘Find My Mobile’ (Free)
If you previously registered your Samsung account on the G610F and enabled ‘Remote unlock’ in the phone’s settings, this is the cleanest official solution. It works even after a factory reset because the phone still has a network connection.
- Go to
findmymobile.samsung.comon a computer or another phone. - Log in with the same Samsung account that was on the locked device.
- Select the G610F from the device list.
- Click ‘Unlock my device’. This will remotely remove the screen lock (PIN/pattern/password), but it does not remove the Google FRP lock.
- After unlocking, you still need to enter the Google account credentials. If you remember them, you’re done. If not, this method only helps with the screen lock, not FRP.
Important: This method does not bypass FRP itself. It only removes the screen lock. Many users confuse this with FRP bypass. To actually remove FRP, you need to log in with the correct Google account or use a tool that deletes the FRP data partition.
Method 2: Setup Wizard Exploit (Works on Android 6.0.1)
On older G610F units still running Android 6.0.1, a well-known exploit uses the setup wizard’s ‘Accessibility’ settings to open a browser and download a file that disables FRP. This is a manual, free method, but it requires precision.
- Start the phone normally. On the ‘Welcome’ screen, select language and connect to Wi-Fi.
- When you reach the ‘Verify your account’ screen, do not enter any credentials. Instead, press and hold the ‘Home’ button or the ‘Recent apps’ button to trigger Google Assistant (if available).
- If Assistant opens, type ‘Settings’ and open it. If not, use the ‘Emergency call’ shortcut: tap ‘Emergency call’, then dial
*#*#4636#*#*(testing menu) and tap the three-dot menu to access ‘Settings’. - Once in Settings, go to Accessibility → TalkBack → Settings (the gear icon).
- Scroll down and enable ‘Explore by touch’. Then, double-tap ‘About’ and open ‘Version info’.
- Tap ‘Version’ repeatedly until a popup says ‘Enable developer options’.
- Go back to Settings → Developer options → enable USB debugging.
- Now, connect the phone to a PC with the Samsung USB drivers installed. Use a tool like ‘ADB’ to run the command:
adb shell settings put secure user_setup_complete 1andadb shell settings put global device_provisioned 1. - Reboot the phone. It should skip the setup wizard and go to the home screen. Then you can remove the Google account from Settings → Accounts.
Note: This method is complex and may not work on newer security patches. If the phone has been updated to Android 8.1, this exploit is patched.
Method 3: Third-Party FRP Bypass Tools (Paid)
For newer firmware or when manual methods fail, specialized software can remove FRP by directly modifying the phone’s data partition. These tools run on Windows, require a USB cable, and often need a paid license.
- Octoplus/Octopus Box Samsung: A popular box that supports FRP removal for many Samsung models, including the G610F. It works by reading the phone’s EFS and data partitions and clearing the FRP lock flag.
- Z3X Box (Samsung Tool Pro): Another professional-grade tool that offers a direct ‘Remove FRP’ function. It requires a dongle and a subscription.
- Free trials: Some tools offer a limited free trial that can remove FRP once or twice. However, they often require a paid credit to unlock the full feature.
How they work: These tools connect to the phone in Download Mode (Volume Down + Home + Power), then use proprietary protocols to write a small file or clear the ‘FRP’ partition. This is safe if done correctly, but a wrong operation could brick the device.
Common Problems and How to Avoid Them
Several issues crop up during FRP bypass attempts:
- Phone not recognized by PC: Install the correct Samsung USB drivers (version 1.5.51 or newer) and use a genuine USB cable. Try a different USB port.
- Setup wizard crashes: If the exploit causes a crash, the phone may reboot back to the FRP screen. Reboot and try a different shortcut path.
- Tool says ‘Unsupported model’: Ensure the tool’s version supports the G610F with your specific firmware. Check the tool’s official forum for the latest supported Android versions.
- Phone stuck in boot loop: This can happen if the FRP partition was incorrectly modified. Re-flash the stock firmware using Odin (a Samsung flashing tool) to restore the device.
Safety and Legal Considerations
Only bypass FRP on a phone you own. Using these methods on a lost or stolen phone is illegal and unethical. FRP is a theft deterrent; circumventing it on someone else’s device is a crime in many jurisdictions.
Additionally, some bypass methods require ‘rooting’ the device, which voids the warranty and can make the phone vulnerable to malware. If you choose to use a paid tool, download it only from the official developer’s website to avoid malicious software disguised as bypass tools.
Frequently Asked Questions
Will a factory reset remove FRP on the G610F?
No. A factory reset actually triggers FRP. If you reset the phone without removing your Google account, the phone will ask for that account’s password after the reset. The only way to remove FRP is to log in with the correct account or use a bypass method.
Can I bypass FRP without a PC?
Yes, but only on older Android 6.0.1 firmware using the setup wizard exploit. On newer firmware, you almost always need a PC with ADB or a paid tool. There is no reliable ‘no-PC’ method for Android 8.1 on the G610F.
Is it safe to use a paid FRP bypass tool?
If you download the tool from the official developer’s website and follow instructions, it is generally safe. However, any tool that writes to the system partition carries a small risk of bricking the phone. Always back up your data (if possible) and use a reliable power source.
How long does an FRP bypass take?
A manual exploit can take 15-30 minutes. A paid tool typically takes 5-10 minutes, including driver installation and connection. The process is mostly automated once the phone is in Download Mode.
What if I forgot my Google account password?
If you own the phone and forgot the password, you can try to recover it via Google’s account recovery page. If you cannot recover it, the only option is to bypass FRP using the methods above. Samsung’s official ‘Find My Mobile’ will not help with Google FRP.
Will bypassing FRP affect future updates?
No. Once the FRP lock is removed and you set up the phone with a new Google account, future OTA updates should install normally. However, if you used a tool that modified system files, a future update might fail; you can re-flash stock firmware to fix that.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Unbox ASMR Codes: What They Are & How to Use5.00 min/km
- Repurposed Old Motorola Phone for Homelab?
- How to Evaluate AI Vendors for Data Security, Privacy & Compliance
- Best Ergonomic Mouse: Top Picks & Buying Guide
- Captions in Google Slides: How to Add & Format Them
- Use Mac Type in Japanese? Full Guide