keepcalculator

06 Numbers and Powers

Samsung 3nm Chips: Manufacturing Status Explained

Card No. 06·74748 · Updated · Standard formula, shown below

Yes, Samsung has started manufacturing 3nm chipsets. The company began mass production of its 3nm gate-all-around (GAA) process technology in mid-2022, making it the first foundry to ship 3nm wafers commercially. This article explains what that milestone means, how the technology works, what products use it, and how it compares to competing processes.

Background: Why 3nm Matters

Semiconductor manufacturing is described by node sizes (e.g., 7nm, 5nm, 3nm), which historically referred to the smallest feature on a chip. Smaller nodes pack more transistors into the same area, improving performance and energy efficiency. The jump to 3nm is significant because it pushes transistor density to roughly 300 million transistors per square millimeter (in Samsung’s first-gen 3nm GAA process), a major leap over 5nm. This density enables faster, more power-efficient chips for smartphones, servers, and AI accelerators.

How Samsung’s 3nm GAA Works

Samsung’s 3nm process is the first to use Gate-All-Around (GAA) transistors, specifically a type called MBCFET (Multi-Bridge-Channel FET). Unlike FinFET, where the gate wraps around a vertical fin of silicon, GAA uses horizontal nanosheets stacked vertically, with the gate wrapping all four sides of each sheet. This design reduces current leakage and allows the gate to control the channel more precisely, enabling lower operating voltages and higher performance at the same power. Samsung’s first-gen 3nm (3GAE) offers up to 45% lower power consumption, 23% higher performance, and 16% smaller area compared to its 5nm process, according to the company.

Mass Production Timeline and Yield

Samsung announced the start of 3nm mass production on June 30, 2022, at its Hwaseong, South Korea, fab. Initial production was for a cryptocurrency mining chip from a Chinese company, PanSemi, which was a low-volume, high-yield-tolerant product. By 2023, Samsung was working to improve yields for high-performance chips like smartphone application processors. Reports indicated yields on early 3nm wafers were lower than 5nm, but Samsung has steadily improved them. As of 2024, Samsung’s second-gen 3nm (3GAP) is in production, with improved yield and performance.

What Products Use Samsung 3nm Chips?

As of early 2025, the most prominent consumer product using Samsung’s 3nm process is the Samsung Galaxy S24 series, which uses the Exynos 2400 chipset in some regions (like Europe). The Exynos 2400 is built on Samsung’s 3nm GAA process. Additionally, Samsung’s own system LSI division is using 3nm for its next-generation Exynos chips, and several smaller fabless companies (like PanSemi) have used it for specialized chips. However, major customers like Qualcomm and NVIDIA have not yet committed to Samsung 3nm for their flagship products, largely due to yield and performance concerns.

Samsung 3nm vs. TSMC 3nm

TSMC, the world’s largest foundry, also began 3nm production in late 2022, using a more mature FinFET transistor design. TSMC’s 3nm (N3) is used in Apple’s A17 Pro and M3 chips, which are widely regarded as high-performance and power-efficient. Samsung’s GAA approach is theoretically superior, but TSMC’s process has delivered better yields and performance in practice, according to industry analyses. Samsung’s first-gen 3nm had a lower density (about 300 MTr/mm²) than TSMC’s N3 (about 310 MTr/mm², per TechInsights). Samsung’s second-gen 3nm improves density and performance, but TSMC has moved to N3E and N3P, which are more mature. The competition is fierce, and Samsung’s 3nm is a key attempt to close the gap.

Common Misconceptions

One common misconception is that “3nm” is a physical dimension. It is not; it’s a marketing term that has changed meaning over time. Another is that Samsung’s 3nm is already in every high-end phone. In reality, most Samsung phones use 4nm or 5nm chips, and only the Exynos 2400 in select regions uses 3nm. Also, some believe that GAA is a Samsung-only technology, but TSMC is also adopting GAA for its 2nm node, expected around 2025. Finally, a common question is whether 3nm chips run hot. While they can be dense, the GAA design reduces leakage, which helps with thermals, but actual heat depends on the chip’s power draw and cooling solution.

Cost and Yield Challenges

3nm manufacturing is extremely expensive. The cost of a 3nm wafer is estimated to be around $20,000, compared to roughly $16,000 for 5nm. This high cost is due to advanced lithography (EUV), new materials, and lower yields early on. Samsung reportedly had early yield rates of only 10-20% for 3nm, which improved to over 60% by late 2023 for some products. Low yields mean that many defective chips are discarded, raising the cost per good chip. This is a major reason why many companies stick with 4nm/5nm or use TSMC’s more mature 3nm.

Alternatives to Samsung 3nm

If you’re considering a chipset, the main alternatives to Samsung 3nm are TSMC’s 3nm (used in Apple A17 Pro, M3, and many Android flagship chips like the Snapdragon 8 Gen 3) and TSMC’s 4nm (used in many mid-range and some flagship chips). Samsung’s own 4nm process is also used in the Exynos 2200 and Snapdragon 8 Gen 1 (some versions). For most users, the difference between 3nm and 4nm is not dramatic in daily use, but 3nm offers better battery life and sustained performance in demanding tasks like gaming. When choosing a phone, look at the chipset name and reviews, not just the node size.

Frequently Asked Questions

Is Samsung’s 3nm chipset in the Galaxy S24?

Yes, but only in the Exynos 2400 version of the Galaxy S24 series sold in select regions (like Europe and parts of Asia). In the US, the Galaxy S24 uses the Snapdragon 8 Gen 3, which is made on TSMC’s 4nm process. So check your region’s model.

Does 3nm mean better battery life?

Generally, yes. The 3nm process reduces power consumption by about 45% compared to 5nm at the same performance, according to Samsung. This translates to longer battery life in real-world use, especially under heavy loads, but other factors like screen size and software optimization also matter.

Why is TSMC’s 3nm more popular than Samsung’s?

TSMC’s 3nm has achieved higher yields and better performance in production, which is why major companies like Apple and Qualcomm choose it. Samsung’s 3nm GAA is technically advanced but has faced yield issues, making it less attractive for high-volume flagship chips. However, Samsung is improving.

When will Samsung’s 3nm be used in more phones?

Samsung is expected to expand 3nm usage in its Exynos chips, with the Exynos 2500 (expected in the Galaxy S25 series in 2025) likely built on 3nm GAA. However, the company may still use Snapdragon in some regions, so 3nm adoption will grow gradually.

Is 3nm safe for daily use?

Yes, 3nm chips are safe. They are designed to meet the same reliability standards as any other chip. The smaller transistors do not pose any health or safety risks to users. The only concern is that early yields can lead to higher costs, but that doesn’t affect the end product’s safety.

Can I upgrade my phone to a 3nm chip?

No, you cannot upgrade the chipset in an existing phone. The chipset is soldered to the motherboard and is not user-replaceable. To get a 3nm chip, you would need to buy a new phone that uses one, like the Galaxy S24 (Exynos version) or future models.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →