keepcalculator

06 Numbers and Powers

Samsung Tab S7 Fingerprint Scanner: In Display or Capacitive?

Card No. 06·73270 · Updated · Standard formula, shown below

The Samsung Galaxy Tab S7 does not have an in-display fingerprint scanner; it uses a capacitive fingerprint sensor built into the side power button. This means you unlock the tablet by pressing your registered finger against the button on the right edge, not by touching the screen.

Background: Why the Side Button?

When Samsung designed the Tab S7 series in 2020, it chose a side-mounted capacitive sensor rather than the ultrasonic in-display scanner found on its flagship phones like the Galaxy S20 or Note 20. The decision likely came down to cost, thickness, and practicality. Tablets have large displays that would require a bigger and more expensive in-display sensor module. A side button is cheaper, takes up less internal space, and is easy to reach when holding the tablet in landscape orientation (for example, when using the keyboard cover or watching videos).

The Tab S7, Tab S7+, and Tab S7 FE all share the same side-mounted fingerprint reader. The sensor is integrated into the power button, which sits on the right side of the device (when viewed from the front in portrait mode). It is a capacitive sensor, meaning it reads the ridges and valleys of your fingerprint electrically. It does not use ultrasound or optical scanning.

How the Side Capacitive Scanner Works

Capacitive fingerprint sensors work by creating a tiny electrical field. When you place your finger on the button, the ridges of your fingerprint alter the capacitance at different points on the sensor array. The sensor captures this pattern and compares it to the stored template. The Tab S7’s sensor is fast and reliable, typically unlocking in under half a second. It also supports gestures: you can set it to open the notification shade when you swipe down on the button, which is a handy shortcut.

Unlike in-display optical sensors that need the screen to light up, the capacitive sensor works even when the screen is off. It does not require any special lighting, so it works in complete darkness. It also works when your finger is slightly wet or oily, though not as well as when dry.

In-Display vs. Capacitive: What’s the Difference?

In-display fingerprint scanners come in two main types: optical and ultrasonic. Optical sensors shine a bright light through the screen to capture a 2D image of your finger. Ultrasonic sensors use sound waves to map a 3D image. Both are embedded under the display panel, so you touch a designated area on the screen.

Side capacitive sensors are the older, more mature technology. They are generally faster and more accurate than optical in-display sensors, and they are cheaper to implement. The trade-off is that you have to locate the button, which is not always intuitive for people used to rear-mounted or front-mounted sensors. On the Tab S7, the button is easy to find because it’s the only button on the right edge, but some users accidentally press it when holding the tablet.

How to Set Up and Use the Fingerprint Scanner on Tab S7

Setting up the fingerprint scanner on the Tab S7 is straightforward:

  1. Open Settings > Biometrics and security > Fingerprints.
  2. Enter your PIN, pattern, or password to confirm.
  3. Tap Add fingerprint and follow the on-screen instructions. You’ll be asked to place your finger on the power button multiple times, adjusting it each time.
  4. Once registered, you can use the same finger to unlock the device, authorize purchases, or access secure folders.

You can register up to three fingerprints. It’s a good idea to register the same finger in two different positions (e.g., right thumb and right index finger) to improve recognition when holding the tablet in different ways.

Common Problems and Fixes

Some users report that the fingerprint scanner on the Tab S7 stops working or becomes less accurate over time. Common causes include:

  • Dirty sensor: The button collects dust and oil. Wipe it with a dry microfiber cloth.
  • Screen protector interference: A thick screen protector should not affect the side sensor, but a poorly aligned one might cover the button. Make sure the protector doesn’t overlap the button.
  • Software glitch: Restart the tablet or go to Settings > Biometrics and security > Fingerprints and check if the sensor is still recognized. If not, try removing and re-adding your fingerprints.
  • Hardware failure: If the sensor is physically damaged, it may need repair. This is rare but possible.

If the scanner fails to read your finger, try washing and drying your hands, then re-registering the fingerprint. Also ensure you are pressing the button firmly and completely.

Comparison: Tab S7 vs. Other Samsung Tablets

Among Samsung tablets, the Tab S7 series is not unique in using a side capacitive sensor. The Tab S6 and Tab S6 Lite also use side-mounted sensors. The newer Tab S8 series also uses a side capacitive sensor. Only the Tab S9 Ultra uses an in-display fingerprint scanner, which is a notable change. If you are considering a used or older model, expect the side button on all S6, S7, and S8 models.

Compared to the Tab S7, the Tab S7+ has a larger screen and a different aspect ratio, but the fingerprint sensor is in the same location. The Tab S7 FE (Fan Edition) also has a side sensor, though it is positioned slightly differently due to the larger frame.

Security and Accuracy Considerations

Capacitive fingerprint sensors are considered secure for everyday use. They are more difficult to spoof than optical sensors because they require a 3D representation of your finger. However, no fingerprint sensor is foolproof. For maximum security, use a strong PIN or password as your primary lock method, and use the fingerprint only for convenience.

The sensor on the Tab S7 has a false rejection rate (FRR) of about 1-2% in normal use, meaning it will occasionally fail to recognize your finger. This is comparable to other capacitive sensors. The false acceptance rate (FAR) is very low, below 0.001%.

Frequently Asked Questions

Does the Tab S7 have an in-display fingerprint scanner?

No. The Tab S7 uses a capacitive fingerprint sensor built into the side power button. It does not have an in-display scanner.

Can I use the fingerprint scanner with a screen protector?

Yes. A screen protector does not cover the side button, so it will not interfere. However, a thick case might make the button harder to press. Choose a case that leaves the button exposed.

Why does my fingerprint scanner sometimes not work?

Common reasons include a dirty sensor, wet or sweaty fingers, or a software glitch. Clean the button, dry your finger, and restart the device. If the problem persists, re-register your fingerprints.

Is the side fingerprint scanner faster than in-display?

Generally, yes. Capacitive sensors are faster than optical in-display sensors because they don’t need to light up the screen. Ultrasonic in-display sensors are comparable in speed but are more expensive.

Can I use the fingerprint scanner to unlock apps?

Yes. You can use the fingerprint to unlock Samsung Pass, Secure Folder, and other apps that support biometric authentication. You can also use it to authorize Samsung Pay.

Does the Tab S7 FE have the same fingerprint scanner?

Yes, the Tab S7 FE also has a side-mounted capacitive fingerprint sensor on the power button. The location is the same as on the Tab S7.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →