keepcalculator

06 Numbers and Powers

Samsung Smartwatch E-Waste: Community Fight

Card No. 06·75766 · Updated · Standard formula, shown below

Samsung smartwatches have become a significant source of electronic waste, and the communities that once thrived on repairing and modding them are struggling to stay alive. The core issue is that Samsung’s aggressive trade-in programs, combined with the increasing difficulty of repairing modern watches, are pulling devices out of circulation faster than the community can salvage them. This article explains the forces behind this e-waste crisis, how the repair community is being squeezed, and what can be done about it.

The Scale of the Problem

Samsung sells tens of millions of smartwatches annually, with the Galaxy Watch series being one of the most popular Android-compatible wearables. Like all consumer electronics, these devices have a finite lifespan—typically 3 to 5 years before the battery degrades, the screen fails, or the software becomes too slow. When a watch dies, the owner is often offered a trade-in credit toward a new model. Samsung’s trade-in program, which can offer up to $150 or more for an old watch, is designed to make upgrading frictionless. The old watch is then either refurbished for resale or, more often, dismantled for parts or recycled.

The problem is that this streamlined process doesn’t leave much room for the aftermarket repair community. Independent repair shops and hobbyists rely on a steady supply of used, broken, or obsolete watches to harvest screens, batteries, and logic boards. When Samsung’s official program captures the vast majority of old devices, the community’s raw material disappears.

Why Repairs Are Getting Harder

Modern Samsung smartwatches are not designed to be repaired. The Galaxy Watch 4, 5, and 6 series use a sealed chassis with a glued-on display and a non-removable battery. Opening one requires heat guns, specialized suction cups, and a steady hand. Even then, the risk of cracking the AMOLED screen is high. Official repair parts are rarely sold to independent shops; Samsung’s own repair program is limited to a few authorized service centers. This forces hobbyists to cannibalize donor watches, which are becoming scarce.

Additionally, the software side is hostile to tinkering. Recent firmware updates have locked down bootloaders, making it harder to install custom ROMs or even replace the battery without triggering software checks. The community that once flourished on XDA forums—where developers shared custom watch faces, battery-saving tweaks, and even full OS ports—now finds that each new generation is less hackable than the last.

The Community’s Economic Squeeze

The repair community operates on thin margins. A typical independent repair shop might charge $80 to replace a Galaxy Watch battery, but the part costs $20–$30. If they can’t source parts, they can’t offer the service. With Samsung capturing most trade-ins, the supply of donor watches has dried up. On eBay, a broken Galaxy Watch 4 with a cracked screen still sells for $40–$60, because someone will buy it for the battery or the vibration motor. That price is rising as supply shrinks.

Forums like Reddit’s r/GalaxyWatch and iFixit’s community pages show a recurring theme: people asking where to buy a replacement battery, and the answer being “good luck.” Some enthusiasts have resorted to buying new watches just to salvage the battery for an older model, which defeats the purpose of repair. The community is not dying because people don’t care; it’s dying because the economics no longer work.

E-Waste Consequences

The irony is that Samsung’s trade-in program, which is marketed as eco-friendly, may be creating more e-waste than it prevents. When a watch is traded in, it is either refurbished or recycled. Refurbished watches are resold, which is good. But many trade-ins are in poor condition—cracked screens, dead batteries, water damage—and those are shredded for materials. The lithium-ion battery, the rare earth magnets, and the gold-plated connectors are recovered, but the rest becomes waste.

However, the real e-waste problem is the watches that never enter any program. Many users simply throw their old watch in a drawer, where the battery eventually swells and leaks. Others toss it in the trash, where it ends up in a landfill. The repair community, by extending the life of a watch by even a year, reduces the demand for new devices and the associated mining and manufacturing emissions. A 2021 study by the United Nations University found that extending the life of a smartphone by just one year reduces its carbon footprint by about 30%. The same logic applies to smartwatches.

How to Keep Your Watch Alive

If you own a Samsung smartwatch and want to keep it out of the e-waste stream, there are practical steps you can take:

  • Replace the battery yourself—but only if you have the right tools. The Galaxy Watch 4 and later use a battery with a connector, not soldered leads. You’ll need a heat gun, a spudger, and a new adhesive gasket. iFixit sells a kit for about $30.
  • Use a screen protector—a cracked screen is the most common reason watches are discarded. A $5 tempered glass protector can prevent a $100 repair.
  • Turn off always-on display—the OLED screen is the biggest battery drain. Turning it off can extend battery life by 30%, delaying the day you need a new battery.
  • Buy used or refurbished—instead of a new watch, buy a used Galaxy Watch 4 or 5. This keeps a device in service and reduces demand for new manufacturing.
  • Donate to a repair community—if you have a broken watch, post it on a forum or sell it cheaply to a hobbyist. They can often fix it or use it for parts.

What Samsung Could Do Better

Samsung is not the villain here; it’s a company responding to market demand. But there are steps it could take to ease the pressure on the repair community:

  • Publish service manuals—Samsung already does this for its phones in some regions. Extending that to watches would help independent shops.
  • Sell genuine parts—Samsung could sell batteries, screens, and adhesive kits directly to consumers, as Apple does for iPhones. This would reduce the need for donor watches.
  • Design for repairability—using a removable battery or a standard screw instead of glue would make a huge difference. The Galaxy Watch 5 Pro uses a screw to hold the back cover, but the battery is still glued.
  • Support custom ROMs—allowing bootloader unlocking on older models would let the community keep devices alive longer, even after official software updates end.

None of these are radical ideas. They are standard practice in the laptop and desktop PC world. Samsung’s reluctance is likely due to cost and a desire to sell more new watches, but the long-term brand loyalty from a thriving repair community could be worth more.

Alternatives to Buying New

If your Galaxy Watch dies and you can’t repair it, consider these alternatives before buying a new one:

  • Buy a refurbished older model—a Galaxy Watch 3 or Active 2 can be found for under $100 and still works with modern phones, though some features may be missing.
  • Switch to a simpler fitness band—a Xiaomi Mi Band or Fitbit Inspire costs under $50 and covers most health tracking needs. It’s not a smartwatch, but it’s a fraction of the e-waste.
  • Use your phone more—do you really need a watch? Most people can get notifications and step counts from their phone. It’s not as convenient, but it’s zero additional e-waste.

Frequently Asked Questions

Can I replace the battery in my Samsung Galaxy Watch myself?

Yes, but it’s not easy. The Galaxy Watch 4 and later use a glued-in battery. You’ll need a heat gun, a spudger, and a new adhesive. iFixit rates the Galaxy Watch 4 battery replacement as “Moderate” difficulty. If you’re not comfortable with opening the watch, take it to a professional, but be aware that Samsung may void the warranty if you open it yourself.

Why does Samsung make it so hard to repair their watches?

Samsung designs watches to be thin and water-resistant, which requires a sealed chassis. Glue is cheaper and more reliable than screws for keeping water out. The company also wants to sell new watches, so making repairs difficult encourages upgrades. This is a common strategy across the industry, not just Samsung.

Is it worth repairing a smartwatch that’s more than 3 years old?

It depends on the cost. If a battery replacement costs $50 and the watch is otherwise functional, it’s worth it. If the screen is cracked and the battery is dead, the repair cost might exceed the value of the watch. In that case, it’s better to recycle it properly or sell it for parts.

What happens to my old watch when I trade it in to Samsung?

Samsung either refurbishes it for resale or recycles it for materials. The refurbishment process includes cleaning, replacing the battery, and updating the software. If the watch is too damaged, it’s shredded and the metals are recovered. The process is not fully transparent, but Samsung claims to recycle 100% of the e-waste it collects.

Are there any community efforts to keep old Samsung watches alive?

Yes, there are several. The XDA Developers forum has threads on installing custom ROMs on older Galaxy Watches. The r/GalaxyWatch subreddit has a wiki with repair guides. Some independent repair shops, like those in the iFixit community, offer mail-in repair services for Samsung watches. However, these efforts are shrinking as parts become scarcer.

Does Samsung offer a repair program for out-of-warranty watches?

Yes, Samsung has a “Mail-in Repair” service for watches, but it’s expensive and slow. A battery replacement can cost $70–$100, which is often more than the watch is worth. The service is also limited to certain models and regions. For older watches, it’s usually cheaper to buy a used one.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →