keepcalculator

06 Numbers and Powers

SD Card for Drone: How to Choose

Card No. 06·79990 · Updated · Standard formula, shown below

An SD card for a drone stores the photos and videos it captures, and the right choice depends on your drone’s resolution, bitrate, and write speed requirements. Most modern drones need a UHS-I Speed Class 3 (U3) card or better, with a V30 video speed class for 4K recording. This article explains what those ratings mean, how to pick the right capacity and speed, and common mistakes to avoid.

Understanding SD Card Speed Classes

SD cards carry several speed ratings, and they are not interchangeable. The most important for drone use are:

  • Speed Class – a number inside a ‘C’ (e.g., C10) indicates minimum sustained write speed in MB/s. Class 10 means at least 10 MB/s.
  • UHS Speed Class – a number inside a ‘U’ (e.g., U1, U3) applies to UHS-I and UHS-II cards. U3 means at least 30 MB/s sustained write.
  • Video Speed Class – a ‘V’ followed by a number (e.g., V30, V60, V90) guarantees minimum write speed for video recording. V30 = 30 MB/s, V60 = 60 MB/s, V90 = 90 MB/s.
  • UHS Bus Speed – the Roman numeral (I or II) indicates the bus interface. UHS-II cards are faster but require compatible hardware; most drones use UHS-I.

For 4K video, a V30 card is generally the minimum. For 5.4K or high-bitrate modes (above 200 Mbps), a V60 or V90 card may be required. Always check your drone’s manual for the exact specification.

Capacity: How Big Should the Card Be?

Capacity is a trade-off between how much you can record before swapping cards and the risk of losing all footage if the card fails. Common sizes are 32 GB, 64 GB, 128 GB, and 256 GB.

Most drones support up to 256 GB or 512 GB, but some older models cap at 64 GB. Using a card larger than the drone supports can cause recording errors or the drone may simply not recognize it. Also, very large cards mean you might not offload footage for a long time, increasing the chance of a card failure taking all your work with it. Many pilots prefer two 64 GB cards over one 128 GB card for this reason.

For example, at 100 Mbps, a 64 GB card holds about 85 minutes of video.

How to Choose: Step-by-Step

  1. Check your drone’s manual for the required SD card type (usually microSD) and the recommended speed class.
  2. Note the maximum supported capacity (e.g., 128 GB).
  3. Determine your recording bitrate from the drone’s video settings (e.g., 100 Mbps for 4K).
  4. Decide how long you need to record between card swaps (e.g., 30 minutes).
  5. Buy a card that meets or exceeds the speed class and capacity, from a reputable brand.

If you are unsure, a U3/V30 UHS-I card with 64 GB or 128 GB capacity is a safe choice for most consumer drones. For professional drones with high bitrates (like 400 Mbps), a V60 or V90 card is safer.

Common Problems and Misconceptions

“Higher capacity means faster” – Not necessarily. Capacity and speed are independent. A 256 GB card can be slower than a 32 GB card if they have different speed classes.

“The drone only records 4K, so any card works” – 4K is just resolution. The bitrate matters more. A 4K video at 200 Mbps requires a faster card than a 4K video at 60 Mbps.

“I can use the card from my phone” – Many phone cards are U1 or C10, which may be too slow for continuous 4K recording. The drone may stop recording or drop frames.

“Formatting the card in the drone is optional” – Formatting in the drone ensures the file system is compatible (usually exFAT or FAT32). Using a card formatted differently can cause errors. Always format a new card in the drone before first use.

“SD cards last forever” – They have a limited number of write cycles. High-bitrate recording wears them out faster. Replace cards periodically, especially if you fly frequently.

Real-World Usage and Costs

In practice, most hobbyist pilots use 64 GB or 128 GB cards. A 64 GB card at 100 Mbps gives about 85 minutes of recording, which is more than a typical flight battery lasts (usually 20–30 minutes). So a single card can cover several flights before you need to offload.

Prices vary by brand, speed, and capacity, but generally a 64 GB U3/V30 card is modestly priced, while 256 GB V90 cards cost significantly more. You don’t need the fastest card unless your drone’s bitrate demands it. Check the specs, not the marketing.

Also consider using a card reader with USB 3.0 to transfer files quickly. A slow reader can make a 64 GB transfer take a long time.

Safety and Handling Tips

  • Always power off the drone before inserting or removing the card.
  • Keep spare cards in a protective case to avoid dust and static damage.
  • Do not remove the card while the drone is writing data – wait for the recording indicator to stop.
  • Back up your footage regularly. Card failure is rare but possible.
  • If the drone reports a card error, try reformatting it in the drone. If that fails, test the card in a computer.

Never use a card that has visible physical damage, and avoid buying from unknown brands with no speed ratings – they may be counterfeit and fail mid-flight.

Frequently Asked Questions

What does U3 mean on an SD card? U3 is a UHS Speed Class rating that guarantees a minimum sustained write speed of 30 MB/s. It is the minimum recommended for 4K video on most drones.

Can I use a normal SD card in a drone? Most drones use microSD cards, not full-size SD. A full-size SD card will not fit. If your drone has a microSD slot, you need a microSD card (often with an adapter for use in a computer).

How do I know what bitrate my drone records at? Check the drone’s manual or the video settings in the app. Bitrate is often shown as Mbps (e.g., 100 Mbps) and may vary with resolution and frame rate. Some drones allow you to choose a lower bitrate to save space.

Is a V30 card enough for 5.4K video? It depends on the bitrate. If the drone records 5.4K at 200 Mbps, you need a card that can sustain at least 25 MB/s (200/8), so V30 (30 MB/s) is technically enough. However, many manufacturers recommend V60 or V90 for high-bitrate modes to avoid buffer overruns. Check the manual.

Why does my drone say “SD card slow”? That warning appears when the card’s write speed is too low for the current recording mode. Switch to a lower bitrate or use a faster card (higher V rating).

Should I format my SD card before every flight? Not necessary, but formatting after transferring files helps keep the file system clean and can prevent errors. At minimum, format a new card before first use.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →