If your Seagate Backup Plus drive is not showing up on your Mac, the cause is almost always one of three things: a USB connection issue, a macOS permission or driver problem, or the drive being formatted in a file system macOS cannot read (like NTFS). This article walks you through the most effective fixes in order, from the quickest cable check to reformatting the drive, so you can get back to backing up your files.
Why the Drive Isn’t Showing Up
The Seagate Backup Plus line includes portable and desktop drives that ship formatted for both Windows and Mac in many models, but not all. Some versions are NTFS-formatted out of the box, which macOS can detect but not mount by default. Others use exFAT, which both systems read natively. Before you try any software fix, understand that a drive can be physically connected and powered on yet still invisible in Finder if the file system is unsupported, if the USB port isn’t delivering enough power, or if the drive’s driver hasn’t loaded.
macOS also has a security feature called “external drive approval” in System Settings > Privacy & Security. If the drive was connected before macOS Sequoia or later was installed, the system may block it until you explicitly allow it. This is a common cause of a drive that worked yesterday but is ignored today.
Check the Obvious: Cable, Port, and Power
Start with the physical layer. A faulty cable or a low-power USB port is the single most common reason a Backup Plus drive is not recognized. The drive needs both data and power over the USB connection; if the port doesn’t supply enough current, the drive may spin up but never appear.
- Try a different USB cable, preferably the one that came with the drive.
- Plug directly into the Mac’s USB port, not a hub or a keyboard’s pass-through port.
- For desktop Backup Plus models with a separate power adapter, make sure the adapter is plugged into a wall outlet and the LED on the drive is lit.
- If you’re using a USB-C to USB-A adapter, try a native USB-C cable instead.
After reconnecting, wait 30 seconds and check Disk Utility. If the drive appears there but not on the desktop, the hardware is fine and the issue is software.
Check Disk Utility and Finder Preferences
Open Disk Utility (in /Applications/Utilities) and look at the left sidebar. If the Seagate drive appears under “External,” then macOS sees it. If it’s grayed out or has a yellow warning icon, the file system is the problem. If it doesn’t appear at all, the issue is at the USB or driver level.
Also verify that Finder is set to show external disks on the desktop. In Finder, go to Settings > General and check the box next to “External disks.” If the drive is mounted but hidden, this is the fix.
If Disk Utility shows the drive but it’s not mounted, click the drive name (not the volume below it) and click the Mount button. If that fails, you may need to run First Aid on the volume.
Fix the File System: NTFS vs. exFAT vs. HFS+
The Backup Plus ships in different formats depending on the model and purchase date. The most common formats are:
- NTFS – Windows native. macOS can read it but cannot write to it by default, and sometimes won’t mount it at all without third-party software.
- exFAT – Works on both Windows and macOS without extra drivers. This is the best format for a drive you’ll use on both systems.
- HFS+ or APFS – Mac native. If the drive is formatted this way and still not recognized, the problem is not the file system.
If the drive is NTFS and you only need to read files, you can often just install a free NTFS reader like macFUSE (open source) or use the paid Paragon NTFS for Mac. If you need to write to the drive, reformatting to exFAT is the most reliable free solution. Reformatting erases everything, so back up the drive’s contents to another location first.
Reformat the Drive (Last Resort)
If the drive is recognized in Disk Utility but won’t mount, and you’ve confirmed it’s NTFS, reformatting to exFAT will make it work. Here’s how:
- Open Disk Utility and select the Seagate drive in the sidebar.
- Click “Erase” in the toolbar.
- Name the drive (e.g., “Backup”).
- Choose “exFAT” as the format.
- Choose “GUID Partition Map” as the scheme (this is required for bootable Mac drives, but also works fine for external storage).
- Click Erase and wait for it to finish.
After reformatting, the drive should appear on the desktop and be usable on both Mac and Windows. If the drive still doesn’t appear after reformatting, the hardware itself may be failing.
Reset the SMC and NVRAM (For Intel Macs)
On Intel Macs, the System Management Controller (SMC) manages USB power and external device recognition. Resetting it can fix a drive that isn’t getting enough power. The steps vary by model, but for most Intel MacBooks:
- Shut down the Mac.
- Connect the Seagate drive.
- Press and hold Shift+Control+Option on the left side of the built-in keyboard, and the power button, all at once for 10 seconds.
- Release all keys, then press the power button to turn on the Mac.
For iMac and Mac mini, unplug the power cord for 15 seconds, then plug it back in. For Apple silicon (M1/M2/M3) Macs, there is no SMC reset; instead, just restart the Mac and hold the power button until you see “Loading startup options,” then choose your disk and continue.
When the Drive Is Physically Dead
If you’ve tried all the above and the drive still doesn’t appear in Disk Utility, or if you hear clicking sounds, the drive may have a hardware failure. In that case:
- Try a different computer (Windows or another Mac) to confirm it’s not your Mac.
- If it’s still not recognized, the drive’s internal controller or platters may be damaged.
- Data recovery services can often retrieve data, but they are expensive. Do not attempt to open the drive yourself.
Seagate includes a limited warranty, and you can check the status on their website with the drive’s serial number. If the drive is under warranty, you may get a replacement, but that won’t recover the data.
Frequently Asked Questions
Why does my Seagate drive show up on Windows but not Mac?
Most likely the drive is formatted as NTFS, which macOS doesn’t support natively. Reformat to exFAT to use it on both systems, or install an NTFS reader for Mac.
Can I use the Seagate Backup Plus with Time Machine?
Yes, but you must format it as Mac OS Extended (Journaled) or APFS. Time Machine will not work with exFAT or NTFS. Reformat the drive using Disk Utility before setting it up as a Time Machine backup destination.
Why does the drive show up in Disk Utility but not on the desktop?
Finder’s desktop preferences may have external disks hidden. Go to Finder > Settings > General and check “External disks.” If it’s still not visible, the drive may not be mounted; click the Mount button in Disk Utility.
Will reformatting erase my files?
Yes, reformatting completely erases the drive. Back up any data you need before proceeding. If the drive won’t mount, you may still be able to recover files with data recovery software before reformatting.
Is there a Seagate driver I need to install on Mac?
For most modern Macs, no. macOS has built-in support for exFAT and HFS+. For NTFS, you need a third-party driver like macFUSE or Paragon. Seagate’s own software (Toolkit) is for backups and not required for the drive to appear.
What if the drive is making a clicking noise?
Clicking is a classic sign of a mechanical failure. Stop using the drive immediately and contact a professional data recovery service. Do not try to fix it yourself.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Infinity Essence in Sailor Piece: Farming and Uses
- Apollo.io Alternatives for Sales Prospecting
- Deploy AI Agents in a Service Desk With Human Oversight
- AIM and Yahoo Profiles: When Did You Last Look?
- Best Smartwatch Under ₹5,000 in India: What to Buy
- Chat History vs Saved Memory in AI Assistants