keepcalculator

06 Numbers and Powers

Sony Bravia Without Remote: What You Can Do

Card No. 06·70568 · Updated · Standard formula, shown below

If you’ve lost your Sony Bravia remote, or the batteries died at the worst moment, you can still turn the TV on, change inputs, adjust volume, and even access streaming apps using the buttons on the TV itself, a smartphone app, or a universal remote. The exact options depend on your Bravia model and year, but there is almost always a way to control the TV without the original remote. Below is a practical guide to every method that works, what to try first, and how to get a replacement when you need one.

Use the Physical Buttons on the TV

Every Sony Bravia has a small set of physical buttons, usually on the bottom edge, the back panel, or the side. They are minimal, but they are enough to get you through a day without a remote. Look for a joystick-style button or a row of buttons labeled with power, volume, channel, and input. On many recent models, a single multi-directional button controls power, volume, and channel. Press the center to select, and tilt it up or down to change volume or channel. The input button cycles through HDMI ports, so you can reach a streaming stick or cable box. If you cannot find the buttons, check the back of the TV near the ports or the lower right corner of the bezel. The manual for your model, available on Sony’s support site, shows the exact location.

Control the TV with Your Smartphone

If your TV is connected to the internet, the fastest replacement for a remote is the Google TV app (for Android and iOS) or the Sony | Video & TV SideView app, depending on your model. These apps turn your phone into a full remote over Wi-Fi, with a D-pad, volume controls, and a keyboard for text entry. To use them, your phone and TV must be on the same Wi-Fi network. The app will discover the TV automatically, or you can enter the code shown on the TV screen. If the TV is not connected to Wi-Fi yet, you can still use the physical buttons to go into the network settings and connect it. For older Bravia models (pre-2015), the SideView app is the one that works. For newer models with Google TV, the Google TV app is the standard. Both are free and do not require a remote to set up.

Use a Universal Remote or a Replacement Remote

A universal remote is a reliable fallback, and it does not require programming on most newer Bravia models. Many universal remotes support Sony’s IR codes out of the box, and some support Bluetooth for newer models. If you have a universal remote, point it at the TV and try the power button. If it does not work, you may need to enter a code from the remote’s manual. Sony’s common IR codes are 001, 002, 003, and 004, but the exact code depends on the remote brand. Alternatively, you can buy a replacement remote from Sony or a third-party seller. The replacement will work immediately if it is a genuine Sony remote or a compatible one that lists your model number. For Bravia models with Bluetooth remotes, you may need to pair the new remote by holding the Home and Back buttons together for a few seconds, but the TV will guide you through it.

Use HDMI-CEC to Control the TV with Another Device’s Remote

If you have a cable box, streaming stick, or game console connected via HDMI, you can often control the TV with that device’s remote. This works because of HDMI-CEC, which Sony calls Bravia Sync. When enabled, the TV responds to commands from the connected device. For example, if you have an Amazon Fire TV Stick, its remote can turn the TV on and off, adjust volume, and switch inputs, as long as CEC is on. To enable CEC without the TV remote, you would need to use the physical buttons to navigate to Settings > External Inputs > Bravia Sync Settings and turn it on. If CEC is already enabled, the other remote will work immediately. This is a great option if you already have a streaming device with its own remote.

Use the Sony Bravia App for Screen Mirroring and Casting

Even without a remote, you can still cast content to the TV from your phone or computer if the TV supports Chromecast built-in or Apple AirPlay. For Chromecast, open a video in a supported app (like YouTube or Netflix) and tap the cast icon, then select your TV. The TV will start playing the content, and you can control playback from your phone. For AirPlay, swipe down from the top-right on an iPhone or iPad, tap Screen Mirroring, and select the TV. This does not give you full TV control, but it lets you enjoy content without touching the TV. To stop playback, you can use the physical buttons to turn the TV off, or just let it time out. This method is especially useful if you only want to watch something and do not need to change settings.

What to Do If the TV Is Stuck on a No-Signal Screen

If the TV shows a “No Signal” message and you cannot change the input without a remote, use the physical input button to cycle through the HDMI ports. If you have multiple devices, press the input button repeatedly until you see the correct one. If you are not sure which port your device is in, try each one. On some models, the input button also brings up a menu where you can select the source with the volume or channel buttons. If the TV is stuck on a smart home screen and you cannot navigate, use the physical buttons to go to the settings and perform a factory reset, but be aware that this will erase your settings and require you to set up the TV again. A factory reset is usually done by holding the power button for 10 seconds or navigating to Settings > System > About > Reset, but the exact method varies by model.

How to Prevent This in the Future

To avoid being stuck without a remote again, consider these simple steps. First, download the Google TV app or SideView app on your phone and keep it updated, so you always have a remote in your pocket. Second, enable HDMI-CEC on your TV and on your streaming device, so you can use that device’s remote. Third, write down the model number of your TV and keep a note of the universal remote codes that work with it. Fourth, consider buying a replacement remote now, even if you find the original later, because they are inexpensive and can be stored in a drawer. Finally, if you use a streaming stick, its remote can often control the TV’s power and volume, so you may not need a Sony remote at all.

Frequently Asked Questions

Can I use my phone as a remote if the TV is not on Wi-Fi?

No, the smartphone apps require both the phone and TV to be on the same Wi-Fi network. If your TV is not connected, use the physical buttons to go to network settings and connect it to Wi-Fi. Once connected, the app will work.

How do I pair a new Bluetooth remote with my Sony Bravia?

Put the remote in pairing mode by holding the Home and Back buttons simultaneously for about 5 seconds. The TV will show a pairing prompt. If the TV does not respond, use the physical buttons to navigate to Settings > Remotes & Accessories and select the remote from the list.

Why doesn’t my universal remote work with my Bravia?

Most universal remotes need a code to work with Sony TVs. Check the remote’s manual for Sony codes, or try the auto-search function. If the remote uses Bluetooth, it may need to be paired with the TV, which requires the TV’s physical buttons to navigate to the Bluetooth settings.

Can I control the TV with a game console controller?

Yes, if you have a PlayStation or Xbox connected via HDMI, the controller can often control the TV’s power and volume through HDMI-CEC. On PlayStation, go to Settings > System > HDMI and enable “Enable HDMI Device Link.” On Xbox, go to Settings > General > TV & display options and enable “Control other devices.”

What do the physical buttons on my Bravia look like?

On most models, there is a single joystick button on the bottom edge, near the center or right side. It can be pressed to select and moved up/down/left/right. Some models have separate buttons for power, volume, and input, usually on the back left side. Check the manual for your specific model.

Is there a way to turn on the TV without a remote if the physical button is broken?

If the physical power button is broken, you can still turn on the TV using a universal remote, a smartphone app (if the TV is on standby and connected to Wi-Fi), or by unplugging and plugging it back in, which will usually power it on. However, if the TV is completely off and not in standby, the app will not work unless the TV has an Ethernet connection and is set to wake on LAN.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →