keepcalculator

06 Numbers and Powers

Unplug TV When Not Watching? Real Savings

Card No. 06·83514 · Updated · Standard formula, shown below

Yes, you should unplug your TV when you’re not watching it if you want to eliminate standby power draw, reduce your electricity bill by a small amount, and protect the TV from power surges. The savings are modest—typically $1 to $5 per year for a modern TV—but unplugging also extends the life of the internal components and is completely safe if done correctly.

What Is Standby Power?

Even when your TV appears off, it’s often still drawing electricity. This is called standby power, vampire power, or phantom load. The TV keeps a small amount of power flowing to:

  • Receive signals from the remote control (infrared or Bluetooth)
  • Maintain settings like picture mode, Wi-Fi connection, and app data
  • Support “instant on” features that let the TV start quickly
  • Power any built-in voice assistants or smart home hubs

The amount varies by model and age. A modern LED TV might draw 0.5 to 3 watts in standby, while older plasma or large smart TVs can draw 5 to 10 watts. The U.S. Department of Energy estimates that standby power accounts for 5–10% of residential electricity use, though that includes all devices, not just TVs.

How Much Does Standby Power Cost?

To calculate the cost, you need three numbers: the standby wattage, the hours per day the TV is in standby, and your electricity rate. For example, a TV that draws 1 watt in standby for 20 hours a day uses 7.3 kilowatt-hours (kWh) per year (1 W × 20 h/day × 365 days ÷ 1000). At the U.S. average electricity rate of about 16 cents per kWh, that’s roughly $1.17 per year. Even a high-draw 10-watt standby would only cost about $11.68 per year. So while unplugging saves energy, it won’t dramatically lower your bill.

Benefits Beyond the Bill

Unplugging your TV offers several advantages that go beyond the small financial savings:

  • Surge protection: A lightning strike or a power surge from the grid can damage your TV even when it’s off. Unplugging physically disconnects it from the electrical path.
  • Component longevity: Electronic components degrade with heat and electrical stress. Reducing the time the TV is energized can extend its lifespan.
  • Eliminate phantom load: If you have multiple TVs, game consoles, and streaming devices, the combined standby draw can be more significant.
  • Safety: Unplugging reduces the risk of electrical faults, especially if you have old wiring or frequent storms.

When Unplugging Makes Sense

Unplugging is most beneficial in these situations:

  • You’re going on vacation or won’t use the TV for several days.
  • You live in an area prone to lightning storms or power outages.
  • You have an older TV with a high standby draw (check the manual or a watt-meter).
  • You use a smart plug or power strip to cut power easily without reaching behind the TV.

If you watch TV daily and rely on instant-on features, the inconvenience of waiting 10–30 seconds for boot-up may outweigh the tiny savings. In that case, leaving it plugged in is fine.

Potential Downsides of Unplugging

There are a few drawbacks to consider:

  • Loss of settings: Some TVs reset picture settings or lose Wi-Fi credentials when fully powered off, though most modern models store these in non-volatile memory.
  • No scheduled recordings: If you use a TV tuner with scheduled recordings, unplugging will stop that function.
  • Wear on the power connector: Frequent plugging and unplugging can wear out the outlet or the TV’s power cord. Using a power strip or smart plug avoids this.
  • Inconvenience: You have to wait for the TV to boot and reconnect to Wi-Fi each time.

For most people, the best compromise is to use a smart plug or a switched power strip. That way you can cut power with a tap or voice command without physically pulling the plug.

How to Measure Your TV’s Standby Draw

If you want to know exactly how much your TV uses in standby, you can use a plug-in power meter (like a Kill A Watt). Plug the meter into the wall, then plug the TV into the meter. Turn the TV off and read the wattage displayed. Multiply that by the hours per day it’s in standby and by your electricity rate to get the annual cost. Many libraries also lend these meters for free.

Frequently Asked Questions

Does unplugging the TV reset it?

For most modern TVs, unplugging does not reset the settings. Your picture preferences, Wi-Fi network, and app logins are stored in flash memory, so they remain intact. However, the TV will take longer to start up and may need to reconnect to Wi-Fi, which can take a minute or two.

Can unplugging a TV damage it?

No, unplugging a TV is safe and won’t damage it, provided you unplug it correctly (grip the plug, not the cord). The only risk is if you unplug it repeatedly while the TV is still on, which could cause a voltage spike. Always turn the TV off first, then unplug.

Is it better to leave the TV on standby or turn it off?

Turning it off (using the remote) is better than leaving it fully on, but unplugging is even better for energy savings. The difference between standby and unplugged is small, but unplugging also protects against surges. For daily use, standby is fine; for long absences, unplug.

Do smart TVs use more power in standby?

Yes, smart TVs tend to have higher standby draw because they keep Wi-Fi and voice assistant features active. Some can draw 5–10 watts in standby. If you rarely use the smart features, you can disable them in settings to reduce standby power, or simply unplug the TV when not in use.

How much money can I save by unplugging my TV?

For a typical 55-inch LED TV with 1 watt standby draw, you’ll save about $1.50 per year. If you have multiple TVs and streaming devices, the total could be $5–10 per year. It’s not a huge amount, but it’s free money and reduces your carbon footprint.

Does unplugging a TV protect it from lightning?

Yes, unplugging is the only sure way to protect your TV from a direct lightning strike through the power line. A surge protector can handle small surges, but a direct strike can still damage electronics. Unplugging during a storm is the safest practice.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →