keepcalculator

06 Numbers and Powers

Surface Pro No Sound? Fixes That Work

Card No. 06·80749 · Updated · Standard formula, shown below

If your Surface Pro has no sound, the fix is usually a quick settings check or a driver restart, not a hardware replacement. This guide walks you through the most common causes and the exact steps to restore audio on Windows 10 and Windows 11.

Quick Checks Before You Dig In

Start with the basics. Click the speaker icon in the system tray (bottom-right corner) and make sure the volume slider is not at zero and that the output device is set to Speakers or Surface Audio, not Bluetooth headphones or a monitor. Also check the physical volume buttons on the side of the Surface Pro. If you have external speakers or headphones plugged into the 3.5mm jack, unplug them—the Surface may still be routing audio to that port even if nothing is connected.

Restart the Audio Service

Windows runs a background service called Windows Audio that manages all sound. If it stalls, you get silence even though the volume bars appear to move. To restart it:

  1. Press Win + R, type services.msc, and press Enter.
  2. Scroll to Windows Audio. Right-click it and select Restart.
  3. If Restart is grayed out, first click Stop, then Start.
  4. Close the window and test sound again.

This fixes a surprising number of cases because the service can crash silently after a sleep/wake cycle or a driver update.

Update or Reinstall the Audio Driver

The most common culprit for Surface Pro audio problems is a corrupted or outdated driver. Microsoft pushes driver updates through Windows Update, but sometimes a manual refresh is needed.

  1. Right-click the Start button and select Device Manager.
  2. Expand Sound, video and game controllers.
  3. Look for Realtek(R) Audio or Surface Audio. Right-click it and choose Uninstall device. Check the box Delete the driver software for this device if it appears, then confirm.
  4. Restart your Surface Pro. Windows will automatically reinstall the correct driver.

If the problem persists, go to Settings > Windows Update > Advanced options > Optional updates and install any driver updates listed there. Alternatively, download the latest driver package from the official Microsoft Surface support page (search for “Surface Pro drivers and firmware”).

Run the Built-in Audio Troubleshooter

Windows includes a dedicated troubleshooter that can detect and fix common audio issues automatically.

  1. Open Settings (Win + I) and go to System > Sound.
  2. Scroll down to Advanced and click All sound devices.
  3. Select the device that is not working (e.g., Speakers) and click Troubleshoot.

Alternatively, in Windows 11, go to Settings > System > Troubleshoot > Other troubleshooters and run Audio. The tool will ask you to select the problematic device and then apply fixes like resetting the audio service or changing the default format.

Check the Default Audio Format

Sometimes the audio driver is set to a sample rate or bit depth that the Surface’s internal speakers don’t support, causing silence or crackling. To change it:

  1. Right-click the speaker icon in the system tray and select Sound settings (or Sounds in older Windows).
  2. Under Output, click the device name (e.g., Speakers) and then Device properties.
  3. Click Additional device properties at the bottom.
  4. Go to the Advanced tab and change the Default format to 16 bit, 44100 Hz (CD Quality).
  5. Click Test and then OK.

If that works, you can try higher formats like 24 bit/48000 Hz, but many users find that the lower setting is the most stable.

Disable Audio Enhancements

Windows applies “enhancements” like bass boost or virtual surround that can interfere with the Surface’s speakers. Turning them off is a quick fix:

  1. Open Sound settings as above.
  2. Click Device properties for your output device.
  3. Click Additional device properties.
  4. Go to the Enhancements tab (or Advanced in some drivers) and check Disable all enhancements.
  5. Click OK and test.

This is especially relevant after a Windows feature update that re-enables enhancements by default.

Check for Hardware Issues

If none of the software fixes work, the problem may be physical. The Surface Pro’s speakers are small and can fail after a drop or liquid exposure. To test if the hardware is truly dead:

  • Plug in a pair of wired headphones or earbuds. If you hear sound, the internal speakers are likely damaged.
  • Try a Bluetooth speaker. If that works, the audio chip is fine, but the internal amp or speaker cable may be loose.
  • Check if the volume buttons are stuck or if the mute switch (if your model has one) is on.

If the problem only occurs when the device is under load (e.g., while charging), it could be a power management issue. Go to Device Manager, right-click the audio device, select Properties, go to the Power Management tab, and uncheck Allow the computer to turn off this device to save power.

Frequently Asked Questions

Why does my Surface Pro have no sound after a Windows update?

Windows updates can overwrite the audio driver with a generic version that doesn’t fully support the Surface’s hardware. The fix is to reinstall the driver as described above, or use the optional updates section to install the specific Surface driver from Microsoft.

My Surface Pro shows “No Audio Output Device Installed” – what does that mean?

This error means Windows doesn’t see any working audio hardware. It’s usually a driver problem. Uninstall the audio device in Device Manager and restart. If that doesn’t work, check if the device appears with a yellow exclamation mark; if so, right-click and select Update driver.

Can a Surface Pro’s speakers be replaced?

Yes, but it’s not a user-serviceable part. The speakers are soldered to the chassis and require opening the device, which risks damaging the screen. It’s best to contact Microsoft Support or an authorized repair center.

Why is the sound only coming from one speaker?

This is often a balance issue. Go to Sound settings > Device properties > Levels and check the balance sliders. If they’re even, it could be a loose connection or a failing speaker. Try the troubleshooting steps first, then consider hardware repair.

Does a factory reset fix Surface Pro sound problems?

It can, because it reinstalls all drivers and removes any software conflicts. But it’s a last resort. Try the driver reinstall and service restart first. If you do reset, back up your files and choose “Remove everything” for a clean slate.

Why does my Surface Pro have no sound when using Bluetooth headphones?

That’s a different issue. Go to Settings > Bluetooth & devices, remove the headphones, and pair them again. Also check that the headphones are not connected to another device. If they work on your phone but not the Surface, update the Bluetooth driver from the optional updates list.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →