To stop the Sony TV HDMI banner from appearing, set the “Info Banner” option to “Off” in the HDMI signal format or external input settings. If you want the banner to show only briefly when you switch inputs, choose “On” and adjust the display duration in the same menu.
What Is the HDMI Info Banner?
The HDMI info banner is a small overlay that appears at the top or bottom of your Sony TV screen when you change inputs, turn on a connected device, or adjust certain picture settings. It displays the input name (e.g., “HDMI 1”), the resolution (e.g., 4K 60Hz), the color format (e.g., RGB or YUV), and sometimes the HDR status. This banner is part of Sony’s Android TV and Google TV interface, and it is designed to confirm which source you are viewing and what signal it is sending.
The banner is not the same as the “Input” menu you open with the remote. The banner appears automatically and disappears after a few seconds. While some users find it helpful, many find it distracting, especially when it pops up repeatedly during normal viewing or gaming.
Where to Find the Info Banner Setting
The exact menu path depends on your Sony TV model and whether it runs Android TV or Google TV (most models from 2015 onward use one of these). On most Sony TVs, you can find the setting by following these steps:
- Press the HOME button on the remote.
- Select Settings (gear icon).
- Choose Channels & Inputs (or External Inputs on some models).
- Select HDMI signal format or HDMI info banner depending on the model.
On newer Google TV models, the path is: Settings > System > Channels & Inputs > External Inputs > Info Banner. If you cannot find it there, try Settings > Device Preferences > HDMI or Inputs. The setting may also be labeled “Input Info Banner” or “Display Info Banner.”
What Are Your Options?
When you open the Info Banner setting, you typically have two or three choices:
- On – The banner appears every time you switch inputs or turn on the TV.
- Off – The banner never appears automatically.
- Auto (on some models) – The banner appears only when the TV detects a new device or a signal change.
Some models also let you set a display duration, such as 5 seconds, 10 seconds, or 30 seconds. If you want the banner but find it stays too long, shorten the duration. If you want it only when you press the “Display” button on the remote, choose “Off” – you can still bring it up manually by pressing the DISPLAY or INFO button.
Which Setting Should You Choose?
The best setting depends on how you use your TV:
- If you game or watch content with static HUDs – Choose Off. The banner can obscure game elements or subtitles and may appear repeatedly when switching between game consoles and streaming apps.
- If you use multiple HDMI devices and want to confirm the source – Choose On with a short duration (e.g., 5 seconds). This helps you verify that the correct input is active without being too intrusive.
- If you have a home theater receiver or HDMI switch – Choose Auto if available. This way the banner appears only when the signal changes, which is useful when the receiver switches inputs.
There is no right or wrong answer – it is a matter of personal preference. If you are unsure, start with “Off” and press the Display button when you need to see the signal info.
Why Does the Banner Keep Appearing?
If you have set the Info Banner to “Off” but it still appears, there are a few common causes:
- You are seeing the “Input” menu instead – The input menu appears when you press the Input button on the remote. That is different from the info banner.
- The banner is triggered by a signal change – Some TVs show a brief banner when the resolution or refresh rate changes (e.g., when you start a game). This may be controlled by a separate setting called “Signal Info” or “Resolution Banner.”
- The TV is in a different mode – If you are using a TV as a monitor, the banner may appear when the computer wakes up or changes resolution. Check the “External Inputs” settings again.
- Firmware bug – Occasionally, a software update can reset settings or introduce a bug. Try restarting the TV (unplug for 30 seconds) and check for updates under Settings > System > About.
If the banner still appears after turning it off, try setting it to “On” and then back to “Off” – this sometimes forces the TV to save the setting correctly.
Does the Banner Affect Picture Quality or Input Lag?
No, the info banner is purely an overlay. It does not change the picture quality, resolution, or input lag. It is drawn by the TV’s interface and disappears after a few seconds. However, if you are gaming and the banner appears during gameplay, it can be distracting and temporarily cover part of the screen. That is why many gamers turn it off.
Some users confuse the info banner with the “HDMI signal format” setting, which controls whether an HDMI port accepts enhanced formats like 4K 120Hz or VRR. Changing the info banner setting does not affect the signal format. If you are trying to enable 4K 120Hz, you need to set the HDMI port to “Enhanced format” (or “Enhanced (Dolby Vision)”) in the same menu area.
Frequently Asked Questions
Why is my Sony TV showing a banner every time I switch inputs?
That is the HDMI info banner. To stop it, go to Settings > Channels & Inputs > External Inputs > Info Banner and select “Off.” If it still appears, check if your TV has a separate “Signal Info” setting or try a restart.
Can I make the banner show only when I press a button?
Yes. Set the Info Banner to “Off” and use the DISPLAY or INFO button on your remote whenever you want to see the current signal details. This gives you manual control.
Does the banner appear on all Sony TVs?
Most Sony TVs with Android TV or Google TV have this banner, but the exact settings label varies. Older Bravia models may have it under “External Inputs” or “HDMI Settings.” If you cannot find it, consult your TV’s manual by entering the model number on Sony’s support site.
Will turning off the banner affect HDR or 4K?
No. The banner is just an overlay. Turning it off does not change the video signal, HDR metadata, or resolution. You can still verify HDR by pressing the Display button.
Why does the banner show “HDMI 1” but no resolution?
This usually means the connected device is not sending a standard video signal, or the TV has not fully detected it. Check the HDMI cable and try a different port. If the device is a PC, make sure it is outputting a supported resolution.
Can I change the duration of the banner?
Some Sony models allow you to set the display duration (e.g., 5, 10, or 30 seconds) in the same Info Banner settings. If you do not see that option, your model may not support it – then your only choices are On or Off.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- How to Choose an Amplifier for Magico A3 Speakers
- How to Ban a Player from Your FiveM Server
- Pokemon Go Friend Codes: How to Add & Use Them33.33 XP/day
- Google Algorithm Change: Original Reporting Boost
- Create Folder for Selected Item on Mac: Full Guide
- Data Center Location Questions for AI Workloads