keepcalculator

06 Numbers and Powers

Teamspeak Make Server? Setup Guide

Card No. 06·73078 · Updated · Standard formula, shown below

Yes, you can make your own TeamSpeak 3 server, and it is a straightforward process that gives you full control over voice chat for gaming, communities, or friends. You need to download the TeamSpeak server software, run it on a computer or a dedicated machine, and then share your server’s IP address and port with others. This guide walks you through the entire setup, from choosing hardware to configuring permissions, plus common problems and alternatives.

What TeamSpeak Server Software Is

TeamSpeak 3 is a proprietary voice-over-IP application. The server software is the program that hosts the voice channels and manages connections. It runs as a background process (a service) on a machine that is always on and connected to the internet. Clients—the free TeamSpeak 3 client app—connect to the server using an IP address and a default port of 9987 (UDP) for voice and 10011 (TCP) for the ServerQuery interface. The server software itself is free to download from the official TeamSpeak website, but there are licensing rules: non-commercial use (like a small gaming clan) is free, while larger communities or commercial use require a license. The free license allows up to 32 slots (concurrent users) by default, but you can request a non-commercial license for up to 512 slots from TeamSpeak’s website.

Hardware and Hosting Options

You have two main paths: run the server on your own hardware or rent a hosted server. For a home server, you need a computer that is always on, has a stable internet connection, and has a public IP address. A typical voice server for 10–20 users uses very little CPU and RAM—a Raspberry Pi 4 or any old PC with 1 GB RAM is enough. However, your upload bandwidth matters: each user in a voice channel typically uses 20–40 kbps, so for 20 users you need at least 1 Mbps upload. If your internet connection uses a dynamic IP, you can use a dynamic DNS service to give your server a fixed hostname.

Renting a server from a hosting provider is easier if you don’t want to maintain hardware. Many providers offer pre-configured TeamSpeak servers for a monthly fee, which includes DDoS protection, backups, and a web panel. The cost varies, but for a small community it is often cheaper than the electricity and time required to run your own 24/7 machine.

Step-by-Step Setup on Windows

Here is the exact process for setting up a TeamSpeak server on a Windows machine:

  1. Download the Windows server archive from the official TeamSpeak downloads page (teamspeak.com/en/downloads/#server).
  2. Extract the ZIP file to a folder like C:\teamspeak-server.
  3. Run ts3server.exe as administrator. The first time it runs, it will generate a server admin token (a long string) and print it in the console. Save this token—you need it to get admin rights.
  4. Open the TeamSpeak client, go to Connections > Connect, enter localhost as the server address, and leave the port as 9987. After connecting, the client will ask for the server admin token; paste it.
  5. To allow others to connect from the internet, you must open port 9987 (UDP) and optionally 10011 (TCP) in your router’s firewall and forward them to the PC running the server.
  6. To keep the server running even when you log off, create a Windows service using the ts3server.exe with the inifile=ts3server.ini parameter, or use the built-in service installer command: ts3server.exe -service (run as admin).

On Linux, the process is similar: download the tarball, extract, run ./ts3server_startscript.sh start from the directory, and note the token. You also need to open the same ports in your firewall (e.g., using ufw on Ubuntu).

Configuring Channels and Permissions

Once you are connected as admin, you can create channels and set permissions. The default server has a few channels, but you can right-click the server in the client and choose “Create Channel” to add new ones. For each channel, you can set a name, a password, a description, and a max users limit. Permissions are managed through the “Permissions” tab. The most important permission is i_client_join_power and i_channel_join_power—these control who can join. A common setup is to give regular users the “Guest” or “Server Regular” group, and moderators the “Server Admin” group. You can create custom groups and assign permissions per group or per channel. For example, to make a channel only visible to a specific group, you set the channel’s i_channel_needed_join_power to a value higher than what regular users have.

Common Problems and Fixes

Three issues are most common when running a TeamSpeak server:

  • Cannot connect from outside: The router is not forwarding the UDP port 9987. Double-check the port forwarding rule and ensure the PC’s firewall allows incoming UDP on that port.
  • Server not showing in the server list: TeamSpeak’s public server list requires your server to be reachable on the default port and have a valid license. If you are using a non-standard port, you must share the full address (e.g., your-ip:9988).
  • Lost admin token: If you lose the token, you can stop the server, edit the serveradmin.ini file to reset the password, or delete the serveradmin.ini and restart—the server will generate a new token.

TeamSpeak vs. Discord vs. Mumble

TeamSpeak’s main advantage is low latency and high customizability. It uses very little bandwidth and CPU, making it ideal for competitive gaming. Discord offers a similar voice experience but is cloud-hosted, so you don’t need to run a server; however, it has higher overhead and less granular permission control. Mumble is an open-source alternative with even lower latency, but its interface is less polished. For a dedicated community that wants full control over data and permissions, TeamSpeak remains a strong choice. For a casual group, Discord is easier because there is no server to maintain.

Safety and Security Considerations

Running a public server exposes you to potential abuse. Always set a strong server admin password and keep the admin token private. Use the “banned” list to block IPs of troublemakers, and enable the “anti-flood” settings in the server configuration. For privacy, do not share your real IP address if you are hosting at home—consider using a VPN or a hosted server to hide your home IP. Also, keep the server software updated to the latest version to patch known vulnerabilities. The TeamSpeak server does not encrypt voice by default, but you can enable TLS for the ServerQuery interface; voice traffic is not encrypted unless you use a third-party plugin, so for sensitive conversations, use a different platform.

Frequently Asked Questions

How many users can I host for free? The free non-commercial license allows up to 32 slots. You can request a free license for up to 512 slots from TeamSpeak’s website for non-commercial use.

Can I run a TeamSpeak server on a Raspberry Pi? Yes, the official server software has a Raspberry Pi version (ARM). A Pi 4 with 2 GB RAM can easily handle 20-30 users.

Do I need a static IP address? No, but if your IP changes, users will not be able to connect until you share the new IP. Use a dynamic DNS service like DuckDNS or No-IP to get a hostname that always points to your current IP.

How do I reset my server admin password? Stop the server, delete the serveradmin.ini file in the server directory, and restart. The server will generate a new admin token, which you can use to log in.

Is TeamSpeak server free for commercial use? No, commercial use (e.g., running a server for a business or charging users) requires a paid license. The free license is only for non-commercial, private use.

What is the difference between the voice port and the query port? The voice port (9987 UDP) carries the actual audio data. The query port (10011 TCP) is used for server management via scripts or the web interface. You only need to forward the voice port for users to connect.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →