keepcalculator

06 Numbers and Powers

Veil Codes Explained: Meaning & Usage

Card No. 06·76848 · Updated · Standard formula, shown below

Veil code 53
Total sky cover
5 oktas
You entered
Lowest cloud layer height
3000 ft
You entered
You enter
Total sky cover, Lowest cloud layer height
You get
Veil code
Rounding
0 dp

The veil codes are a set of three-digit codes used by the U.S. National Weather Service (NWS) to describe the fraction of the sky covered by clouds or other obscuring phenomena, such as fog, smoke, or haze. You enter the total cloud cover in eighths (oktas) and the code for the predominant cloud layer, and the calculator returns the standard NWS veil code. This page explains how the codes work, how to read them, and how to choose the right one for aviation or weather observation.

Formula

The veil code is a two-part number: the first digit (tens place) is the total sky cover in oktas (eighths of the sky), and the second digit (ones place) is the height of the lowest cloud layer in thousands of feet, rounded down. In symbols:

Veil Code = (Total Sky Cover in oktas) × 10 + (Lowest Cloud Base in thousands of feet)

Where:

  • Total Sky Cover – the fraction of the sky obscured by clouds or obscuring phenomena, measured in oktas (0–8).
  • Lowest Cloud Base – the height above ground of the bottom of the lowest cloud layer, in feet. The code uses the number of thousands of feet (e.g., 3,000 ft becomes 3).

For example, if the sky is 5/8 covered and the lowest clouds are at 3,000 feet, the veil code is 53. If the lowest clouds are at 8,500 feet, the code would be 58 (since 8.5 rounds down to 8).

Worked Example

Using the default values from the calculator: total sky cover = 5 oktas, lowest cloud layer height = 3,000 ft.

  1. Convert the cloud height to thousands of feet: 3,000 ft ÷ 1,000 = 3.
  2. Multiply the sky cover by 10: 5 × 10 = 50.
  3. Add the height digit: 50 + 3 = 53.

The result is a veil code of 53, which matches the calculator output.

What the Veil Codes Mean

The veil codes are used in aviation weather reports (METARs) and by weather observers to quickly communicate cloud cover and cloud base height. The first digit (0–8) tells you how much of the sky is hidden, with 0 meaning clear and 8 meaning completely overcast. The second digit (0–9) tells you the height of the lowest cloud layer in thousands of feet, with 9 meaning 9,000 feet or higher (or unknown).

For example:

  • 00 – clear sky
  • 53 – 5/8 covered, lowest clouds at 3,000 ft
  • 88 – overcast, lowest clouds at 8,000 ft
  • 99 – overcast, lowest clouds at 9,000 ft or higher

These codes are not just for clouds—they also apply to obscuring phenomena like fog, smoke, or blowing snow that reduce visibility. In such cases, the “cloud base” is the vertical visibility into the obscuration.

How to Choose the Right Code

When you observe the sky, you need to estimate the total cloud cover in oktas. A common method is to divide the sky into eight equal parts and count how many are covered. Then, find the height of the lowest cloud layer using a ceilometer or by pilot reports. If the lowest layer is broken or overcast, that height is the cloud base.

For obscuring phenomena, the “height” is the vertical visibility—how far you can see upward into the fog or snow. If the sky is completely hidden and you cannot determine the cloud base, you may use 9 for the height digit.

Common Mistakes and Misconceptions

One common mistake is confusing the veil code with the cloud cover in tenths instead of eighths. The NWS uses oktas, not tenths. Another mistake is rounding the cloud height to the nearest thousand instead of rounding down. For example, 3,800 ft should be coded as 3, not 4, because the code uses the floor of the height in thousands.

Another misconception is that the veil code includes the type of clouds (e.g., cumulus, stratus). It does not—the code only covers the amount and height. Cloud type is reported separately in METARs using abbreviations like CU (cumulus) or ST (stratus).

Limitations of the Veil Code

The veil code is a shorthand that loses precision. It does not tell you the distribution of clouds (e.g., scattered vs. broken) beyond the total cover, and it only gives the height to the nearest thousand feet. For aviation, this is often sufficient for planning, but pilots still need full METARs for exact conditions.

Also, the code assumes a single lowest layer. In reality, there may be multiple layers, but the code only reports the lowest one. Higher layers are reported separately in the METAR.

Frequently Asked Questions

What does a veil code of 00 mean?

A veil code of 00 means the sky is completely clear—no clouds or obscuring phenomena. The first digit 0 indicates 0 oktas of cloud cover, and the second digit 0 indicates no cloud base (or 0 feet).

How do I convert a veil code back to cloud cover and height?

Split the code into two digits: the tens digit is the cloud cover in oktas, and the ones digit is the cloud base height in thousands of feet. For example, code 64 means 6 oktas of cloud cover and a cloud base at 4,000 feet.

What if the cloud base is above 9,000 feet?

If the lowest cloud layer is at 9,000 feet or higher, the second digit is 9. This is because the code only has one digit for height, so anything above 9,000 feet is represented by 9.

Are veil codes used internationally?

No, the veil code system is specific to the U.S. National Weather Service. Other countries use similar codes but may differ. For example, METARs use a different format for cloud cover (e.g., FEW, SCT, BKN, OVC) that is more detailed than the veil code.

Can I use the veil code for weather forecasting?

The veil code is primarily for reporting current conditions, not forecasting. However, forecasters may use current veil codes to describe expected cloud cover in aviation forecasts, often in a similar two-digit format.

Related

Formula used
in t | Total sky cover | oktas | 5 | 0 | 8
in l | Lowest cloud layer height | ft | 3000 | 0 | 100000
out vc | Veil code | - | (t * 10) + (l / 1000) | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →