Yes, that Docker container has turned your NAS into an internet performance dashboard. You’re likely running a tool that continuously measures your connection’s speed, latency, and jitter, then displays the results in a web interface you can open from any device on your network. This article explains what that container does, how it works, what you can learn from it, and how to get the most out of it.
What Exactly Is an Internet Performance Dashboard?
An internet performance dashboard is a self-hosted web application that runs periodic speed tests and records the results over time. Unlike a one-off speed test website that gives you a single snapshot, a dashboard stores history so you can spot trends, identify slowdowns, and verify whether your ISP is delivering the speeds you pay for. The most common open-source container for this is Speedtest Tracker, which uses Ookla’s Speedtest CLI under the hood. Other options include LibreSpeed (a local speed test server) and SmokePing (focuses on latency and packet loss).
When you install one of these containers on a NAS (like a Synology, QNAP, or TrueNAS box), the NAS becomes the test device. It runs a speed test against a remote server (usually chosen by Ookla) on a schedule you set—every hour, every 6 hours, etc. The results are stored in a database and displayed in charts and graphs.
How Does the Docker Container Work?
The container packages the speed test binary, a web server, and a database into one isolated unit. Docker ensures it runs consistently regardless of the underlying NAS operating system. Here’s the typical flow:
- The container’s scheduler triggers a speed test at the configured interval.
- The Speedtest CLI contacts Ookla’s servers, finds the closest test server, and measures download speed, upload speed, and ping (latency).
- The results are written to a database (often SQLite or MySQL) inside the container’s volume.
- A web interface reads that database and displays the latest results and historical graphs.
Because the container runs on your NAS, the measurements reflect your network’s performance from that specific device. That’s important: the result is the speed between your NAS and the internet, not necessarily the speed your phone gets over Wi-Fi.
Why Use a NAS for This Instead of a PC?
A NAS is always on, consumes little power, and sits on your network 24/7. That makes it ideal for continuous monitoring. A laptop that sleeps or a desktop that shuts down would create gaps in the data. Also, the NAS’s network connection is usually wired, which gives more consistent results than Wi-Fi. You can run the dashboard for weeks or months and build a reliable dataset that shows daily patterns—like slowdowns during peak evening hours or after a firmware update.
What Can You Learn From the Dashboard?
The graphs reveal more than just raw numbers. Here’s what to look for:
- Consistency: Are speeds stable, or do they swing wildly? A line that looks like a sawtooth indicates variable performance.
- Peak vs. off-peak: Many ISPs throttle or experience congestion during evenings. The dashboard will show that clearly.
- Latency spikes: High ping during certain hours could indicate bufferbloat or congestion.
- Long-term drift: If speeds gradually decline over months, it might be time to check your router, cabling, or ISP plan.
How to Choose the Right Container
Start with Speedtest Tracker if you want a complete history with charts and a clean UI. It’s the most popular and actively maintained. If you only care about latency and packet loss, SmokePing is lighter and more specialized. If you want to test speeds between devices on your local network (not the internet), LibreSpeed is the tool—it runs a server that other devices connect to.
Before installing, check the container’s documentation for the required environment variables and volume mounts. Most need a directory for the database and a port for the web UI. On a Synology NAS, you can use the built-in Docker GUI; on a QNAP, use Container Station. For TrueNAS SCALE, you can use the Apps feature.
Common Problems and How to Fix Them
Users often run into a few issues:
- No results after install: The container may not have internet access. Check that the container’s network mode is set to “bridge” or “host” and that the NAS itself has a working connection.
- Speed test fails intermittently: The Ookla CLI sometimes can’t find a server or times out. Increase the test frequency or check your firewall settings.
- Database errors: Ensure the volume mount points to a persistent directory. If you use a temporary volume, data will be lost when the container restarts.
- Web UI not loading: Verify the port mapping. If the container uses port 80 internally, map it to a free port like 8080.
One misconception is that the dashboard slows down your network. Speed tests do consume bandwidth for about 10-30 seconds each time, so if you run them every 5 minutes, they could interfere with streaming or gaming. A reasonable interval is every 30 minutes to an hour.
Costs and Resource Usage
The software itself is free and open-source. The only cost is the electricity the NAS uses while running the tests, which is negligible—a typical NAS draws 10-30 watts. The container itself uses minimal CPU and RAM, usually under 100 MB of RAM. The database grows slowly; even with hourly tests, a year of data is only a few megabytes.
Alternatives to a Docker Container
If you don’t want to run Docker, you have other options:
- Use a dedicated Raspberry Pi with the same software installed natively.
- Set up a simple cron job on the NAS that runs a speed test script and logs to a file.
- Use a cloud-based monitoring service that pings your public IP, but that only measures reachability, not throughput.
Each has trade-offs. Docker is the most portable and easiest to update. A script is lighter but lacks a web UI. Cloud services don’t measure your actual download speed.
Frequently Asked Questions
Will the dashboard work if my NAS is behind a VPN?
If the NAS routes all traffic through a VPN, the speed test will measure the VPN’s performance, not your raw ISP connection. That can be useful if you want to test the VPN, but it won’t reflect your normal internet speeds. To test the raw connection, exclude the NAS’s traffic from the VPN or run the container on a separate device.
Can I run the dashboard on a Windows or Mac instead of a NAS?
Yes, Docker runs on both Windows and Mac. The container is the same, but you’ll need to keep the computer on 24/7 for continuous data. A NAS is preferred because it’s designed for always-on operation.
How often should I run the speed test?
Every 30 minutes to 1 hour is a good balance. More frequent tests (every 5 minutes) can saturate your connection and affect other users. Less frequent (daily) won’t give you enough data to spot patterns.
Does the dashboard work with any ISP?
Yes, it uses public speed test servers, so it works with any ISP that provides internet access. The results are independent of your ISP’s own speed test tool, which might be biased.
Can I see the results from outside my home network?
You can expose the web UI to the internet, but that’s a security risk. Better to use a VPN to access your home network remotely, or use a reverse proxy with authentication. The container itself doesn’t require internet access to display the dashboard.
Why does my dashboard show lower speeds than my phone’s speed test?
Your phone might be connecting to a different server, or the NAS’s network hardware (cable, switch, router) could be a bottleneck. Also, the NAS might be running other tasks that consume bandwidth. The dashboard measures the NAS’s perspective, which is the most accurate for that device.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Microsoft Surface Duo: The Foldable Phone Story
- Samsung SM-T813 Hard Reset: Step-by-Step Guide
- Mafia Clash Codes: Real Meanings & Usage
- Remove Programs from Mac: Full Uninstall Guide
- Project Sentinel Morning Digest: Data Stack Failure Alerts
- Best KVM VPS Hosting: Top Picks & Guide