If you see the error “This memory card cannot be used,” it usually means your device—a camera, phone, or tablet—has rejected the card because of a formatting mismatch, a corrupted file system, or a hardware fault. The fix is often simple: back up any readable data, reformat the card in the device that will use it, and test the card again. Below is a detailed breakdown of why this error appears and the exact steps to resolve it.
Why Does This Error Appear?
Memory cards (SD, SDHC, SDXC, microSD) are formatted with a file system that tells the device how to read and write data. The most common file systems are:
- FAT32 – used for cards up to 32 GB, compatible with nearly all devices.
- exFAT – used for cards over 32 GB, supports large files, but older devices may not support it.
- NTFS – used mainly on Windows PCs; most cameras and phones cannot read it.
When a device says “This memory card cannot be used,” it often means the card’s file system is not one the device supports. For example, a camera that only reads FAT32 will reject a card formatted as exFAT. Other causes include:
- The card is write-protected (the lock switch is on).
- The card is corrupted or has bad sectors.
- The card is counterfeit or damaged.
- The card is not inserted fully or the contacts are dirty.
- The device has a firmware bug or is too old for the card’s capacity.
How Memory Cards Are Formatted
Memory cards are formatted at the factory, but you may need to reformat them for a specific device. The formatting process creates a file system and a partition table. The SD Association defines three main card types:
- SD (up to 2 GB) – usually FAT16.
- SDHC (4 GB to 32 GB) – usually FAT32.
- SDXC (64 GB and up) – usually exFAT.
Most modern devices support all three, but some older cameras only support SD and SDHC. If you insert a 64 GB SDXC card into an old camera, it will likely show the “cannot be used” error because the hardware cannot read exFAT. In that case, formatting the card to FAT32 might work, but the card’s capacity may still exceed the device’s limit. Check your device’s manual for maximum supported capacity.
How to Fix the Error
Follow these steps in order. Stop when the card works.
- Check the lock switch – On SD cards, there is a small slider on the left side. If it is down (toward the bottom), the card is write-protected. Slide it up to unlock.
- Clean the contacts – Use a soft, dry cloth to wipe the metal contacts on the card. Do not use liquids.
- Reinsert the card – Remove and reinsert the card, ensuring it clicks into place.
- Try a different device – If possible, test the card in another camera, phone, or card reader. If it works there, the problem is the original device.
- Back up data – If you can access the card on a computer, copy all files to your PC before formatting.
- Format the card – Use the device that gave the error. Most cameras and phones have a “Format” option in settings. This will erase all data and set the correct file system.
- If the device cannot format – Use a computer. Insert the card into a card reader, open Disk Management (Windows) or Disk Utility (Mac), and format it as FAT32 (if the card is 32 GB or less) or exFAT (if it is larger).
- Test again – After formatting, reinsert the card into the device. The error should be gone.
If the error persists after formatting, the card may be physically damaged or counterfeit. Try a different card to confirm the device is not at fault.
Common Mistakes to Avoid
- Formatting on a PC instead of the device – Some devices require a specific allocation size or file system that a PC format may not provide. Always format in the device if possible.
- Using quick format – A quick format does not check for bad sectors. Use a full format if you suspect corruption.
- Ignoring capacity limits – A device that only supports 32 GB will not recognize a 64 GB card even if formatted to FAT32.
- Using a card reader that is faulty – A bad reader can cause errors that make the card seem dead. Test with another reader.
- Not checking for counterfeit cards – Fake cards often report a larger capacity than they actually have, leading to corruption and errors.
How to Choose the Right Card
When you buy a new memory card, consider these factors:
- Capacity – Choose a size that your device supports. Check the manual or manufacturer’s website.
- Speed class – Look for a speed class (Class 10, U1, U3, V30, etc.) that matches your needs. For 4K video, use U3 or V30 or higher.
- Brand – Buy from reputable brands and authorized sellers to avoid counterfeits.
- Type – Full-size SD for cameras, microSD for phones and drones. Adapters are available, but they can cause issues if not high quality.
Can You Recover Data from a Card That Shows This Error?
Yes, often you can. If the card is not physically damaged, you can try:
- Connect the card to a computer – Use a card reader and see if the computer recognizes it.
- Use recovery software – There are free and paid tools that can scan the card and recover photos, videos, and documents. Do not format the card before attempting recovery.
- Try a different operating system – Sometimes Windows cannot read a card but Linux or Mac can.
- Use the chkdsk command (Windows) – Open Command Prompt as administrator and type
chkdsk E: /f(replace E: with your card’s drive letter). This can fix file system errors.
If the card is physically damaged, professional data recovery services may be needed, but they can be expensive.
Frequently Asked Questions
Why does my camera say “This memory card cannot be used” even though it worked before?
This often happens after the card was formatted on a computer or another device with a different file system. Reformat the card in the camera to restore compatibility. Also, check the lock switch and clean the contacts.
Can I format a 64 GB card to FAT32 to make it work in an old device?
Yes, you can format a 64 GB card to FAT32, but the device must support the card’s capacity. Some older devices only support up to 32 GB. If the device does not recognize the card after formatting, it likely has a capacity limit.
What does “Memory card locked” mean?
It means the write-protect switch on the side of the card is in the locked position. Slide it up to unlock. If the switch is broken, you may need to use a piece of tape over the notch, but this is not recommended.
Will formatting the card erase all my photos?
Yes, formatting erases all data on the card. Always back up your files before formatting. If you have already formatted and lost data, stop using the card immediately and use recovery software.
Is it safe to use a memory card adapter?
Yes, but use a high-quality adapter. Cheap adapters can cause connection issues and data loss. Always insert the card fully into the adapter and the adapter fully into the device.
Why does my phone say “SD card not supported”?
This usually means the phone does not support the card’s file system or capacity. Most phones support exFAT for cards over 32 GB. If the card is corrupted, try formatting it in the phone. If that fails, test the card in another device.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Reliable Subaru vs New Honda Civic Cost
- Pokemon Bookmark Corner Designs & Pokemon GO DIY
- Forgotten Games That Created Your Favorite Genres
- Lexus vs Genesis Luxurious Compact SUV0.075 hp/lb
- Uber VW Robotaxi LA Launch Date
- Notebook vs Tablet: Which Saves You More Money?