keepcalculator

06 Numbers and Powers

Tower FL Codes: What They Mean & How to Use Them

Card No. 06·73855 · Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered
You enter
Finish time, Distance
You get
Average pace, Average speed
Rounding
2 dp

Tower FL codes are the two-letter state designations used on tower registration records and engineering documents in the United States, with “FL” specifically identifying structures in Florida. When you see “Tower FL” on a permit, survey, or FCC filing, it simply means the tower is located in Florida; the code is part of a standardized system that helps regulators, engineers, and emergency services quickly identify a tower’s jurisdiction. This article explains what these codes are, how they’re assigned, where you’ll encounter them, and how to read them correctly.

What Exactly Is a Tower FL Code?

A Tower FL code is a shorthand identifier used in tower-related documentation to denote the state of Florida. The system follows the same two-letter abbreviations the U.S. Postal Service uses for states (e.g., FL for Florida, TX for Texas, CA for California). In the context of towers, these codes appear on:

  • FCC antenna structure registration (ASR) filings
  • Local building permits and zoning applications
  • Structural analysis reports and engineering drawings
  • Aviation obstruction lighting and marking records
  • Emergency response maps and utility asset databases

The code itself carries no technical information about the tower—it doesn’t indicate height, material, or owner. It’s purely a geographic locator, but it’s essential for routing paperwork to the correct state agency and for search/filter operations in national databases.

How Tower Location Codes Are Assigned

The two-letter state codes used on tower records come from the U.S. Postal Service’s official abbreviations, which are also adopted by the Federal Communications Commission (FCC) and most state regulatory bodies. For example:

  • FL = Florida
  • GA = Georgia
  • AL = Alabama
  • NY = New York

These codes are not random—they’re standardized in federal data systems so that a tower registered in one state can be easily distinguished from another. When a tower sits near a state border, the code reflects the state in which the tower’s base is physically located, not the state where the owner’s office is. This matters for property tax, zoning, and FAA notification purposes.

Where You’ll See Tower FL Codes in Practice

If you’re a tower owner, inspector, or telecom professional, you’ll encounter these codes in several specific places:

  • FCC ASR database: Each registered tower has a file containing the state code, county, coordinates, and height.
  • Structural analysis reports: Engineers label drawings with the state code to avoid confusion when a company manages towers in multiple states.
  • Local permitting: County and city building departments use the state code on forms to route applications to the right office.
  • Aviation charts: The FAA’s digital obstacle files list towers by state code for pilots and flight planners.

In practice, “Tower FL” might appear as a field label in a spreadsheet, a line on a permit, or a filter option in an online database. It’s not a secret code—it’s just a standard way to say “this tower is in Florida.”

How to Choose the Correct Code for Your Tower

If you’re filling out paperwork for a tower, choosing the right state code is straightforward but requires attention:

  1. Determine the physical address of the tower base—not the mailing address of the owner.
  2. Find the state from that address. If the tower is on a state border, use the state where the concrete foundation sits.
  3. Use the official USPS two-letter abbreviation for that state (e.g., FL for Florida).
  4. Double-check the county code as well, since some databases require both state and county.

Common mistakes include using the owner’s home state instead of the tower’s location, or confusing the state code with the county FIPS code (a five-digit number). Both errors can delay permits or cause a tower to be missed in emergency inspections.

Common Problems and Misconceptions

One frequent misconception is that “Tower FL” implies a specific tower type, like a cell tower or a broadcast tower. It doesn’t—the code only tells you the state. Another issue arises when databases merge records from multiple states: if the state code is missing or wrong, a tower might be assigned to the wrong regulatory region, which can affect FAA notification requirements (towers above 200 feet must be registered regardless of state).

Another problem is confusion with airport location identifiers. FAA airport codes (like MIA for Miami) are different from state codes. A pilot seeing “Tower FL” on a chart should not assume it’s an airport—it’s just a tower in Florida. Always cross-reference the full ASR number or coordinates for precise identification.

Comparisons: Tower FL vs. Other Location Codes

State codes are not the only way towers are identified. Here’s how they compare:

  • State code (FL): Two letters, broad geographic region. Used in permits and FCC filings.
  • County FIPS code: Five digits, identifies the specific county. Used in census and regulatory data.
  • ASR number: A unique registration number assigned by the FCC to each tower. This is the most precise identifier.
  • Coordinates (lat/long): Exact location, used for aviation and mapping.

For most practical purposes, the state code is the first filter you’d use to narrow down a list of towers, but you’ll need the ASR number or coordinates for any legal or safety action.

Safety and Regulatory Context

While the state code itself has no safety implications, it plays a role in regulatory compliance. The FCC requires antenna structure registration for any tower that is more than 200 feet above ground level, or that is near an airport. The registration form asks for the state code as part of the location data. If the code is wrong, the FCC may reject the filing, which could delay construction or leave an unregistered tower in place—a safety hazard for aviation.

For existing towers, the state code helps local emergency responders identify which jurisdiction has authority. For example, a fire department responding to a tower fire in Florida would use the state code to confirm they’re dealing with a Florida-regulated structure, not one in a neighboring state. Always verify the code on official documents before relying on it for emergency response.

Frequently Asked Questions

Is “Tower FL” a specific model or brand of tower?

No. It’s a location code. The “FL” is the U.S. Postal Service abbreviation for Florida. The word “Tower” is just the object being described. There is no such thing as a “Tower FL” brand or model.

Do I need to use the state code on my tower permit?

Yes, in most jurisdictions. Local building departments use the state code to route your application to the correct office and to coordinate with state and federal agencies. Leaving it blank or using the wrong code can delay your permit.

What if my tower is on the border of Florida and Georgia?

Use the state where the tower’s base (the concrete foundation) is physically located. If the base is in Florida, use FL. If it’s in Georgia, use GA. This is the standard rule for FCC and FAA records.

Where can I look up a tower’s state code?

The FCC’s Antenna Structure Registration database lets you search by tower number, county, or state. You can also find the state code on your original permit or structural report. If you don’t have access, contact the local building department where the tower is located.

Does the state code affect tower lighting or marking requirements?

No. Lighting and marking requirements are based on tower height and proximity to airports, not the state. However, the state code is needed to file the correct FAA Notice of Proposed Construction (Form 7460-1) with the correct regional office.

Can I use “FL” for Florida if I’m filing with a non-U.S. agency?

If you’re filing with a U.S. federal agency like the FCC or FAA, use the USPS code. If you’re filing with an international body, they may use the two-letter ISO country code (US) or a different state code system. Always check the specific form’s instructions.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0 | 100000
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →