keepcalculator

06 Numbers and Powers

Turn On Hisense TV Without Remote: 7 Ways

Card No. 06·78838 · Updated · Standard formula, shown below

If you’ve lost your Hisense remote, or its batteries just died, you can still turn on your TV using the physical power button, a universal remote, the Hisense Roku/Android/VIDAA mobile app, or by plugging it into a smart home system. The exact method depends on your TV model and how it’s connected, but nearly every Hisense TV has at least one built-in fallback. This guide covers all the reliable options, step by step, so you can get back to watching without buying a new remote.

Locate the Physical Power Button

Most Hisense TVs have a small joystick or a set of buttons on the back, usually on the lower-left or lower-right corner when you face the screen. Look for a single button that can be pressed in, or a small stick that you can push up/down/left/right. On many models, pressing the joystick once turns the TV on, and pressing it again while the TV is on opens a menu where you can select “Power” to turn it off.

If you don’t see a button on the back, check the bottom edge of the TV, near the stand. Some Hisense models have a hidden button under the chin that is only visible when you look from below. If your TV is wall‑mounted, you may need to temporarily tilt it to reach the button. Once you find it, a single press should power on the TV. If it doesn’t, make sure the TV is plugged in and the wall outlet is working.

Use the Hisense Mobile App

Hisense offers free apps for both Android and iOS that can control your TV over Wi‑Fi. The exact app depends on the smart platform your TV runs:

  • Roku TV: Use the official “Roku” app (not the Hisense app). It can turn on the TV if the TV is in network standby (not unplugged) and both devices are on the same Wi‑Fi.
  • Android TV / Google TV: Use the “Google TV” app (formerly “Android TV” app). It can wake the TV from standby.
  • VIDAA OS: Use the “Hi-VIDAA” or “Anyview Cast” app. Some VIDAA versions support network wake‑on‑LAN.

Before you can use an app, the TV must have been connected to Wi‑Fi at least once. If you’ve never set up Wi‑Fi on the TV, you’ll need to use the physical button to complete the initial setup first. After that, open the app, select your TV, and look for a power icon. If the TV is in standby, the app should send a wake‑up command. If the TV is completely unplugged, no app can turn it on.

Try a Universal Remote

A universal remote can replace your lost Hisense remote. You can buy a basic universal remote from most electronics stores, or use a smartphone with an IR blaster (some Android phones have one) and a universal remote app. To program it, you’ll need the code for Hisense TVs. Common codes are 0001, 0101, 0178, 10178, 11578, 11678, 11756, 11956, 12002, and 12049. The exact code depends on the brand of universal remote, so check the manual that came with the remote.

If your phone has an IR blaster, apps like “Mi Remote” or “SURE Universal Remote” can learn the Hisense codes from a database. Point the phone’s IR emitter at the TV and press the power button. If the TV turns on, you’re set. If not, try a different code from the list. Note that this method only works if the TV has an IR receiver, which most Hisense models do.

Pair a Bluetooth Remote or Keyboard

Some Hisense TVs (especially Roku and Android TV models) support Bluetooth remotes. If you have a spare Bluetooth remote that was previously paired, it will connect automatically when the TV is on. However, if the TV is off, Bluetooth cannot wake it—you still need the physical button or IR to turn it on initially.

If you already have a Bluetooth keyboard or game controller paired, you can use it to navigate the TV’s menus once it’s on, but again, you need another method to power it on first. So this is more of a “navigate without remote” solution than a “turn on” solution.

Use a Smart Home Hub or Voice Assistant

If your Hisense TV is a Roku TV or Android TV, you can control it with Amazon Alexa or Google Assistant, provided you have a compatible smart speaker or hub. For example, you can say “Alexa, turn on the TV” if you’ve enabled the “Roku” skill and linked your TV to your Amazon account. Similarly, Google Home can turn on a Chromecast‑built‑in TV or an Android TV.

To set this up, you need the TV to be on and connected to Wi‑Fi at least once. Then, in the Alexa or Google Home app, add a new device and select “TV” or “Roku”. The TV must be in network standby (not unplugged) for the voice command to wake it. If the TV is unplugged, no voice assistant can help.

Power Cycle the TV

If your TV is completely unresponsive, try a power cycle. Unplug the TV from the wall outlet, wait 60 seconds, then plug it back in. This sometimes forces the TV to turn on automatically, or at least resets the internal circuitry so that the physical button works again. This is a common fix for TVs that are stuck in a standby loop.

If the TV still doesn’t turn on after a power cycle, check the outlet with another device. Also, inspect the power cord for damage. If the TV is plugged into a surge protector, make sure the surge protector is switched on.

Frequently Asked Questions

Can I turn on my Hisense TV with the Roku app if the TV is off?

Yes, if the TV is in standby (not unplugged) and connected to the same Wi‑Fi network as your phone. The Roku app sends a wake‑on‑LAN command that turns the TV on. However, if the TV is completely unplugged or has no network connection, the app cannot help.

Where is the power button on a Hisense TV?

On most models, it’s a small joystick or a single button on the back, near the lower-left or lower-right corner. Some models have it on the bottom edge. Look for a small indentation or a stick that you can press in. If you have a wall‑mounted TV, you may need to tilt it to see the button.

What if my Hisense TV has no physical power button?

Older Hisense models always have a physical button, but some newer ultra‑thin models have hidden buttons that are only visible when you look from a sharp angle. If you truly cannot find one, you can use a universal remote with IR codes, or if the TV is a Roku/Android TV, you can use the mobile app after the TV has been set up. If the TV is new and never been set up, you must find the physical button to complete initial setup.

Can I use my phone’s IR blaster to turn on a Hisense TV?

Yes, if your phone has an IR blaster (common on some Xiaomi, Samsung, and Huawei models). Use a universal remote app, select Hisense as the brand, and point the phone at the TV. The app will send the power code. If the TV doesn’t respond, try a different code from the app’s list.

Why won’t my Hisense TV turn on with the remote even with new batteries?

First, make sure you’re pointing the remote at the TV’s IR receiver (usually near the bottom of the screen). Check if the remote has a pairing button (for Bluetooth remotes) and re‑pair it. If the remote is IR, test it with a phone camera—point the remote at the camera and press a button; if you see a blinking light on the camera screen, the remote is sending a signal. If not, the remote may be faulty. Also, try unplugging the TV for 60 seconds to reset it.

Is it safe to leave the TV in standby mode so I can use the app later?

Yes, standby mode is designed for this. It uses a small amount of power (usually less than 1 watt) and allows the TV to receive network commands. If you unplug the TV, you lose the ability to turn it on with an app or voice assistant, and you’ll have to use the physical button.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →