keepcalculator

06 Numbers and Powers

Turn On Sony TV Without Remote: All Working Ways

Card No. 06·79742 · Updated · Standard formula, shown below

If your Sony TV remote is lost, broken, or out of batteries, you can still turn the TV on using the physical power button on the TV itself, a game console or streaming device that supports HDMI-CEC, or the Sony Android TV mobile app. Most Sony TVs also have a joystick-style button on the back or bottom edge that acts as a power and volume control. This article covers every reliable method, how to set up alternatives, and what to do if the TV does not respond.

Physical Power Button Location

Every Sony TV has a physical power button, but its location varies by model and year. On many current models, the button is a small joystick on the lower-left corner of the back panel. On older models, you may find a row of buttons on the side or bottom edge. Look for a small round or oval button with a power icon; on some models it is recessed and requires a pen tip to press.

If you cannot find it, check the bottom edge near the center or the right side. Sony has used different placements over the years, so a quick visual scan of all edges is usually enough. Once you find it, a single press turns the TV on or off. On models with a joystick, pressing inward is power, while tilting left/right adjusts volume and up/down changes channels.

Using the Sony TV Side or Back Buttons

When you locate the button, pressing it once should power on the TV. If the TV does not respond, it may be in standby mode and needs a slightly longer press (2–3 seconds). After the screen lights up, you can use the same button to adjust volume or change inputs, depending on the model. For TVs with a joystick, tilting it left or right changes volume, and pressing it cycles through inputs on some models.

If the TV is completely unresponsive, check that it is plugged into a working outlet and that the power cord is secure. A blown fuse or tripped circuit breaker can also prevent power-on. If the physical button does nothing, the issue is likely hardware-related, not a remote problem.

HDMI-CEC: Turn On via Game Console or Streaming Device

Many devices connected via HDMI can turn on your Sony TV if HDMI-CEC (Consumer Electronics Control) is enabled. Sony calls this feature Bravia Sync. If you have a PlayStation, Xbox, Roku, Fire Stick, or Chromecast plugged into the TV, simply turning on that device may wake the TV and switch to the correct input.

To use this method, the TV must have Bravia Sync enabled. It is usually on by default, but you can check by going to Settings > External Inputs > Bravia Sync. If it is off, you will need to turn it on using the physical button and on-screen menus. Once enabled, pressing the power button on your console or streaming remote should turn on the TV automatically.

If you have a PlayStation, you can also set it to turn on the TV when you turn on the console. On PS5, go to Settings > System > HDMI > Enable HDMI Device Link. On PS4, go to Settings > System > Enable HDMI Device Link. This works with most Sony TVs and many other brands.

Using the Sony Android TV Mobile App

Sony’s official app, “Sony TV Remote” or “Video & TV SideView,” can control your TV over Wi-Fi. However, the TV must already be powered on to connect. If the TV is in standby, the app may not wake it unless your TV supports “Wake on LAN” and the app has that feature enabled. In practice, the app is most useful after you have turned on the TV manually.

To use the app, download it from the Google Play Store or Apple App Store, connect your phone to the same Wi-Fi network as the TV, and follow the on-screen pairing instructions. Once paired, you can use the app as a full remote, including power off, volume, and input switching. Some newer Sony models also support Google Home, which can turn on the TV via voice command if the TV is set to allow it.

Google Home and Voice Assistants

If your Sony TV is an Android TV or Google TV model, you can use Google Home to turn it on with voice commands. Set up the TV in the Google Home app, then say “Hey Google, turn on the TV.” This works only if the TV is connected to the same Wi-Fi network and has “Wake on LAN” enabled. On some models, you may need to enable “Power on by voice” in the TV settings.

Amazon Alexa works on some Sony models as well, but only if the TV supports Alexa and you have linked your Amazon account. Not all Sony TVs have Alexa built-in, so check your model’s specifications. If you have a Google Nest speaker or display, you can also use it to turn on the TV, even if the TV is in standby.

Replacing or Pairing a New Remote

If you prefer to use a physical remote, you can buy a replacement. Sony TVs use either infrared (IR) or Bluetooth remotes. Most modern models use Bluetooth, but they also support IR for basic functions. A universal remote that supports Sony codes can also work. To pair a new Bluetooth remote, press the “Home” button on the remote while holding it close to the TV, and follow the on-screen instructions.

If you buy an original Sony remote, it should pair automatically when you press any button. For third-party remotes, you may need to enter a code or use auto-scan. Check the remote’s manual for Sony TV codes. If the remote uses IR, you do not need to pair it; just point it at the TV and press power.

What to Do If the TV Does Not Turn On

If you have tried the physical button and nothing happens, first check the power cord and outlet. Try a different outlet, or plug the TV into a surge protector. If the TV still does not power on, unplug it for 60 seconds and plug it back in. This resets the internal power supply and often resolves temporary glitches.

If the TV shows a red blinking LED, that indicates an error code. Count the blinks and consult the Sony support website or your manual. Common issues include a faulty backlight, main board, or power supply. In such cases, professional repair may be needed. Do not attempt to open the TV yourself, as it contains high-voltage components that can be dangerous.

Frequently Asked Questions

Can I turn on my Sony TV without a remote and without the button?

If the physical button is broken, you can try using HDMI-CEC with a connected device, or a universal remote that uses IR. Some models also support wake-on-LAN via the mobile app, but the TV must be previously set up. If none of these work, the TV may need repair.

Where is the power button on my Sony TV?

It is usually on the back, lower-left corner, or on the bottom edge near the center. On many models, it is a small joystick that you press inward. Check all edges and the back panel; it may be labeled with a power icon.

Why won’t my Sony TV turn on with the physical button?

Check the power cord and outlet first. If the TV has power but the button does nothing, try unplugging for 60 seconds. If the LED blinks, note the pattern and look it up. Persistent failure usually indicates a hardware issue.

Can I use my phone as a remote for my Sony TV?

Yes, download the Sony TV Remote app or use Google Home. The TV must be on the same Wi-Fi network. The app works after the TV is on; it may not wake it from standby unless the TV supports that feature.

Does HDMI-CEC work on all Sony TVs?

Most Sony TVs support Bravia Sync, which is their name for HDMI-CEC. It is usually enabled by default. If not, you can enable it in the TV settings under External Inputs.

How do I pair a new remote to my Sony TV?

For Bluetooth remotes, press the Home button while holding the remote near the TV. For IR remotes, no pairing is needed—just point and press. Universal remotes may require a code from their manual.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →