keepcalculator

06 Numbers and Powers

Use Thunderbolt Bridge Mac? How to Set It Up

Card No. 06·75428 · Updated · Standard formula, shown below

Yes, you can use Thunderbolt Bridge on a Mac to create a high-speed network connection between two Macs using a Thunderbolt cable. It is the fastest way to transfer files between two modern Macs without a separate Ethernet adapter, and it is built into macOS. This article covers what Thunderbolt Bridge is, how to set it up, when to use it, and how to troubleshoot common problems.

What Is Thunderbolt Bridge?

Thunderbolt Bridge is a network interface that macOS creates automatically when you connect two Macs with a Thunderbolt cable (or a Thunderbolt-to-Ethernet adapter in some cases). It treats the Thunderbolt connection as a standard Ethernet-like network link, so you can use it for file sharing, screen sharing, or any other network service. The key advantage is speed: Thunderbolt 3 and 4 support up to 40 Gbps, while Thunderbolt 1 and 2 support up to 10 Gbps and 20 Gbps respectively. In practice, file transfer speeds are often limited by the slower of the two Macs’ storage or by the protocol overhead, but you can still see several gigabytes per second, far faster than Gigabit Ethernet (1 Gbps).

How to Set Up Thunderbolt Bridge

Setting up Thunderbolt Bridge is usually automatic, but you may need to verify or manually enable it. Here are the steps for macOS Ventura and later:

  1. Connect the two Macs with a Thunderbolt cable (USB-C to USB-C works if both support Thunderbolt; if you have an older Mac with Thunderbolt 2, use a Thunderbolt 2 cable or an adapter).
  2. On each Mac, open System Settings (or System Preferences on older macOS) and go to Network.
  3. Look for Thunderbolt Bridge in the list of network services on the left. If it is not there, click the + button, choose Interface as Thunderbolt Bridge, and click Create.
  4. Make sure the service is enabled (the checkbox is checked) and that it is set to Using DHCP or Manually with an IP address. By default, macOS uses DHCP, and the two Macs will usually get self-assigned IP addresses like 169.254.x.x, which still work for direct connections.
  5. If you want a stable IP address, you can set one Mac to Manually with IP 10.0.0.1 and the other to 10.0.0.2, with subnet mask 255.255.255.0. This is not required but can make it easier to remember addresses.

After the connection is active, you can verify it by opening System Settings > Network and seeing a green dot next to Thunderbolt Bridge. You can also open Terminal and type ping 10.0.0.2 (or the other Mac’s IP) to test connectivity.

When to Use Thunderbolt Bridge

Thunderbolt Bridge is ideal for transferring large files between two Macs that are physically close to each other, such as when migrating to a new Mac or moving a large video project. It is also useful for screen sharing with low latency, because the link is faster and more reliable than Wi-Fi. However, for everyday networking with multiple devices (like a printer or a NAS), a regular Ethernet or Wi-Fi connection is more practical because Thunderbolt Bridge is a point-to-point connection between two Macs only.

Thunderbolt Bridge vs. Ethernet and Wi-Fi

Here is a quick comparison of common network speeds (theoretical maximums):

  • Thunderbolt 3/4 Bridge: up to 40 Gbps (about 5 GB/s). Real-world file transfer often hits 1-3 GB/s depending on storage.
  • Thunderbolt 1 Bridge: up to 10 Gbps (about 1.25 GB/s).
  • Thunderbolt 2 Bridge: up to 20 Gbps (about 2.5 GB/s).
  • Gigabit Ethernet: 1 Gbps (about 125 MB/s).
  • 10 Gigabit Ethernet: 10 Gbps (about 1.25 GB/s) but requires special adapters.
  • Wi-Fi 6 (802.11ax): theoretical up to 9.6 Gbps, but real-world often 500-1500 Mbps.

So Thunderbolt Bridge is significantly faster than standard Ethernet and Wi-Fi, but it only works between two Macs directly connected with a cable. It is not a substitute for a network switch or router.

Common Issues and Troubleshooting

If Thunderbolt Bridge is not working, try these steps:

  • Check the cable: Not all USB-C cables support Thunderbolt. Use a cable that explicitly says Thunderbolt 3 or 4, or use the original cable that came with your Mac. A plain USB-C cable will not create a Thunderbolt Bridge.
  • Check the ports: Make sure you are using a Thunderbolt port (usually marked with a lightning bolt icon). On Macs with multiple USB-C ports, only some may support Thunderbolt.
  • Restart the network service: Go to System Settings > Network, select Thunderbolt Bridge, and click Disable, then Enable.
  • Renew DHCP lease: In the same pane, click Details next to Thunderbolt Bridge, then TCP/IP, and click Renew DHCP Lease.
  • Turn off Wi-Fi: Sometimes macOS routes traffic over Wi-Fi instead of the bridge. Turn off Wi-Fi on both Macs temporarily to force the bridge.
  • Check firewall settings: If file sharing is blocked, go to System Settings > Network > Firewall and ensure that incoming connections for file sharing (SMB) are allowed.

How to Transfer Files Over Thunderbolt Bridge

Once the bridge is up, you can transfer files using the standard macOS sharing methods:

  1. On the Mac you want to access, go to System Settings > General > Sharing and enable File Sharing.
  2. On the other Mac, open Finder, press Cmd+K, and type smb://[IP address] (for example, smb://10.0.0.1).
  3. You can also use AirDrop, but AirDrop uses Wi-Fi and Bluetooth, so it will not use the Thunderbolt Bridge. For maximum speed, use SMB or a direct copy via the command line.
  4. For very large transfers, you can mount the remote drive and drag files, or use rsync in Terminal for more control.

Frequently Asked Questions

Does Thunderbolt Bridge work with any USB-C cable?

No. You need a cable that supports Thunderbolt 3 or 4. Many USB-C cables only carry USB 2.0 or USB 3.1, which will not create a Thunderbolt Bridge. Look for a cable with the Thunderbolt logo or one that came with a Thunderbolt device.

Can I use Thunderbolt Bridge to connect a Mac to a Windows PC?

Thunderbolt Bridge is a macOS feature. Windows does not have a built-in equivalent, so you cannot create the same automatic network bridge. However, you can use Thunderbolt to Ethernet adapters on both machines and connect them via Ethernet, or use a Thunderbolt-to-Thunderbolt cable with third-party software, but that is not supported by Apple.

Why is my Thunderbolt Bridge not showing up in Network settings?

If you have connected a Thunderbolt cable and the interface is not listed, try restarting both Macs, checking that the cable is fully inserted, and ensuring the ports are Thunderbolt ports. On some Macs, you may need to go to System Settings > Network, click the + button, and manually add a Thunderbolt Bridge interface.

Is Thunderbolt Bridge safe to use on a public network?

Thunderbolt Bridge is a direct point-to-point connection between two Macs, so it is not exposed to the internet or a public network. However, if one of the Macs is also connected to the internet, you should be careful about sharing files with the other Mac, because the connection is not encrypted by default. Use macOS file sharing with encrypted connections (SMB with encryption) if you are transferring sensitive data.

Can I use Thunderbolt Bridge to share internet from one Mac to another?

Yes, you can use Internet Sharing in macOS to share the internet connection from one Mac (e.g., Wi-Fi) to the other via Thunderbolt Bridge. Go to System Settings > General > Sharing, enable Internet Sharing, and select Thunderbolt Bridge as the port to share to. The other Mac will then get internet through the bridge.

Conclusion

Thunderbolt Bridge is a powerful, built-in feature for fast direct Mac-to-Mac networking. It is easy to set up, requires no extra hardware beyond a Thunderbolt cable, and can dramatically speed up large file transfers. While it is not a replacement for a full network, it is an excellent tool for specific tasks like migration or high-bandwidth collaboration. If you run into issues, check the cable, ports, and network settings first—most problems are simple to fix.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →