keepcalculator

06 Numbers and Powers

Weather Balloon Data: What It Collects & How Forecasts Use It

Card No. 06·75071 · Updated · Standard formula, shown below

Weather balloons collect vertical profiles of temperature, humidity, pressure, and wind speed and direction from the ground up to about 30 kilometers (roughly 100,000 feet). This data is fed directly into computer weather models and is essential for making accurate short-term forecasts and severe weather warnings.

What Exactly Does a Weather Balloon Measure?

A weather balloon carries a lightweight instrument package called a radiosonde. As the balloon rises, the radiosonde transmits measurements back to a ground station. The four core variables it measures are:

  • Temperature – measured by a small thermistor (a resistor whose resistance changes with temperature).
  • Humidity – measured with a capacitive or resistive sensor that responds to water vapor.
  • Pressure – measured by an aneroid barometer or a capacitive pressure sensor.
  • Wind speed and direction – not measured directly by the radiosonde; instead, the balloon’s position is tracked by GPS or radio direction finding, and the wind is calculated from the balloon’s drift.

Modern radiosondes also often include an ozone sensor or other specialized instruments for research, but the standard four are the backbone of operational meteorology.

How the Balloon Flight Works

The balloon itself is typically made of latex or a synthetic rubber and is filled with hydrogen or helium. It is about 1.5 to 2 meters (5 to 6 feet) in diameter at launch. As it rises, the surrounding air pressure decreases, so the gas inside expands and the balloon grows – eventually to the size of a small house before it bursts at around 30 km altitude.

The radiosonde hangs below the balloon on a string and transmits data every one to two seconds. A ground-based receiver logs the signals. After the balloon bursts, a small parachute (or the balloon remnants) brings the radiosonde back to Earth. Many national weather services include a return address and a small reward for anyone who finds and mails back a radiosonde, as they are expensive to replace.

How the Data Is Used in Forecasting

The vertical profiles from weather balloons are one of the most valuable inputs for numerical weather prediction (NWP) models. Here’s how they are used:

  • Model initialization – The balloon data gives a snapshot of the current atmosphere at many altitudes, which is used as the starting point for computer models that simulate future weather.
  • Identifying atmospheric instability – By comparing temperature and humidity at different heights, forecasters can see if the atmosphere is unstable enough for thunderstorms. For example, a steep temperature lapse rate (rapid cooling with height) indicates potential for severe convection.
  • Locating fronts and jet streams – Wind profiles show where the jet stream is and how strong it is, which helps forecast storm tracks and aviation turbulence.
  • Forecasting fog and low clouds – The humidity profile near the ground helps predict when fog will form or dissipate.
  • Verifying satellite data – Satellite measurements of temperature and moisture are checked against balloon data to ensure they are accurate.

Without balloon data, forecast models would rely only on satellite and surface observations, which lack the detailed vertical resolution needed for accurate predictions – especially for severe weather.

Common Misconceptions: Do Balloons Measure Clouds or Rain?

No, weather balloons do not directly measure clouds or precipitation. They measure the atmospheric conditions that lead to clouds and rain. For example, if a balloon detects a layer of air that is saturated (relative humidity near 100%) and the temperature is above freezing, a forecaster can infer that clouds are likely there. But the balloon itself does not see the cloud.

Another misconception is that balloons are launched only during storms. In fact, they are launched at least twice a day (at 00:00 and 12:00 UTC) from about 900 locations worldwide, regardless of weather. This regular schedule provides a consistent global dataset for models.

How to Read a Balloon Data Plot (Skew-T)

Forecasters often view balloon data on a specialized graph called a Skew-T log-P diagram. It plots temperature and dew point against pressure (which decreases with height). Key features to look for:

  • Temperature line (red) – shows how air temperature changes with altitude.
  • Dew point line (green) – shows moisture content; the closer it is to the temperature line, the more humid the air.
  • Lifting condensation level (LCL) – the height where a rising parcel of air becomes saturated; this is often the cloud base.
  • Level of free convection (LFC) – the height where a rising parcel becomes warmer than the environment and accelerates upward; important for thunderstorm development.
  • Convective available potential energy (CAPE) – the area between the temperature and parcel curves; a large CAPE value indicates strong updrafts and severe storms.

While you don’t need to read a Skew-T to understand the basics, it is the standard tool meteorologists use to interpret balloon data.

Limitations and Alternatives

Weather balloons have some limitations:

  • Spatial coverage – There are only about 900 launch sites worldwide, so large gaps exist over oceans and remote areas.
  • Time resolution – Twice-daily launches may miss rapid changes between launches.
  • Cost – Each radiosonde costs roughly $100–$300, and they are not recovered most of the time.

To fill gaps, meteorologists use:

  • Satellites – provide broad coverage but with lower vertical resolution near the surface.
  • Aircraft reports – commercial planes measure temperature and wind during takeoff and landing.
  • Ground-based remote sensing – wind profilers and microwave radiometers can measure vertical profiles continuously at a single site.
  • Drones – small uncrewed aircraft are being tested for low-level soundings.

Despite these alternatives, weather balloons remain the gold standard for accurate, high-resolution vertical profiles, especially for calibrating other instruments.

Frequently Asked Questions

How often are weather balloons launched?

Most national weather services launch balloons twice a day, at 00:00 and 12:00 UTC (Coordinated Universal Time). During special campaigns or severe weather events, they may launch more frequently, but the standard is twice daily.

Why do weather balloons explode?

They don’t explode in a dramatic sense; they expand as they rise because the outside air pressure decreases. Eventually, the latex stretches beyond its limit and bursts, typically at an altitude of 25–35 km. The radiosonde then falls back to Earth with a small parachute.

Can I track a weather balloon in real time?

Yes, many amateur radio enthusiasts track radiosondes using a software-defined radio and a program like SondeMonitor or radiosonde_auto_rx. The balloon transmits on a frequency around 400–406 MHz, and the data is often shared online. Some weather services also publish predicted landing locations.

How accurate are weather balloon measurements?

Temperature is accurate to about ±0.5°C, humidity to ±5%, and pressure to ±1 hPa. Wind accuracy depends on the tracking method, but GPS-based systems are accurate to about ±1 m/s. These accuracies are sufficient for operational forecasting.

Do weather balloons pose a hazard to aircraft?

No, they are very lightweight and small, and they drift with the wind. They are not a significant hazard to aircraft. However, they are required to have a radar reflector (a small corner reflector) so that air traffic control can see them on radar and avoid them.

What happens to the radiosonde after the balloon bursts?

The radiosonde falls to the ground, often landing hundreds of kilometers away. Many are never found, but those that are found can be returned to the weather service for refurbishment. Some weather services provide a prepaid mailer and a small reward to encourage returns.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →