keepcalculator

06 Numbers and Powers

8 Bay NAS: What to Check Before Buying

Card No. 06·78501 · Updated · Standard formula, shown below

Before buying an 8-bay NAS, check drive bay compatibility, CPU/RAM performance, network ports, expansion options, power supply, and RAID support. This guide covers the key specifications and decisions so you choose a model that fits your storage needs, performance demands, and budget.

Why Choose an 8-Bay NAS?

An 8-bay NAS is a network-attached storage device with eight drive slots. It sits between a 4-bay home unit and a 12+ bay rackmount enterprise system. Most 8-bay models are desktop towers or small rackmount units. They are popular for prosumers, small offices, and media enthusiasts who need more capacity than 4 bays but don’t want a full rack setup.

With eight drives, you can run RAID 6 (two-drive fault tolerance) and still have plenty of usable space. For example, eight 12 TB drives in RAID 6 give you about 72 TB usable. You can also create multiple RAID groups, or use some bays for SSD caching while others hold HDDs.

Drive Bays and Drive Compatibility

Check the drive form factor: most 8-bay NAS support 3.5-inch SATA drives, and many also accept 2.5-inch SSDs. Some models have hot-swap trays, which let you replace a drive without powering off. Verify the maximum drive height—some trays only fit 15mm drives, not the thicker 20mm enterprise models.

Also check whether the NAS supports SATA III (6 Gb/s) or the newer SAS interface. Consumer NAS typically use SATA. If you plan to use SSDs, confirm that the model supports SSD TRIM and has enough PCIe lanes for NVMe caching (more on that later).

CPU, RAM, and Performance

The CPU and RAM determine how fast the NAS can transfer files, run apps, and handle multiple users. For basic file storage and backup, a dual-core Intel Celeron or AMD Ryzen is fine. For virtualization, Plex transcoding, or heavy database work, you need a quad-core or better, and 8GB or more RAM.

Look for models with expandable RAM. Some come with 4GB soldered and a free SODIMM slot. Others have two slots. If you plan to run containers or VMs, get at least 16GB. Also check the memory type (DDR4 vs DDR5) and maximum supported capacity.

Network Connectivity and 10GbE

The network port is the bottleneck for most NAS. A typical 1GbE port transfers at about 110 MB/s. If you have multiple users or want to edit video over the network, you need 10GbE. Many 8-bay NAS have one or two 1GbE ports, but some offer a 10GbE port or a PCIe slot to add a 10GbE card.

If the NAS has multiple 1GbE ports, you can use link aggregation (802.3ad) to combine them, but this only increases throughput for multiple simultaneous connections, not a single transfer. Check if the NAS supports SMB multichannel, which can also use multiple ports for one connection.

Expansion and PCIe Slots

An 8-bay NAS is often a long-term investment. Check if it has a PCIe slot for adding a 10GbE NIC, an NVMe cache card, or a GPU for transcoding. Some models have one PCIe 3.0 x4 slot, others have two. Also check if the NAS supports external expansion units (e.g., via eSATA or proprietary ports) to add more bays later.

If you plan to use NVMe caching, verify the number of M.2 slots and the supported protocols (NVMe vs SATA). Some NAS have dedicated M.2 slots, while others use a PCIe adapter.

Power Supply and Cooling

Eight spinning drives draw significant power. The PSU should be rated for the maximum drive count plus headroom. For 8 drives, a 250W-350W PSU is common. Check if it’s a standard ATX or a proprietary unit, and whether it’s redundant (two PSUs) for enterprise reliability.

Cooling is also important. Look for a large, quiet fan (120mm or 140mm) and good airflow. Some models have a low-power mode that spins down drives, but frequent spin-ups can reduce drive lifespan. Check the noise level in dBA if the NAS will sit in a living space.

RAID Support and Data Protection

All 8-bay NAS support standard RAID levels: 0, 1, 5, 6, 10. But check the implementation. Some use hardware RAID (a dedicated controller), others use software RAID (like Linux MDADM). Software RAID is more flexible and allows migration between models, but hardware RAID can offer better performance and battery-backed cache.

Also check if the NAS supports proprietary RAID like Synology Hybrid RAID (SHR) or QNAP’s RAID groups. These allow mixed drive sizes and easier expansion. If you plan to use drives of different capacities, a flexible RAID is essential.

Software and Ecosystem

The operating system is what you’ll interact with daily. The two main options are Synology DiskStation Manager (DSM) and QNAP QTS/QuTS Hero. Both offer app stores, file sharing, backup tools, and virtualization. Consider the learning curve and the availability of apps you need (e.g., Plex, Docker, surveillance).

Also check the file system support: ext4, Btrfs, ZFS. Btrfs and ZFS offer snapshots and self-healing, but use more RAM. If you plan to use ZFS, you need at least 16GB RAM. Some models support both.

Common Problems and How to Avoid Them

  • Incompatible drives: Check the NAS’s compatibility list for your drive models, especially for SMR vs CMR drives. SMR drives can be slow in RAID rebuilds.
  • Underpowered PSU: If the PSU is too small, the NAS may shut down during heavy writes. Choose a model with a PSU rated for at least 1.5x the max power draw.
  • Single point of failure: Many 8-bay NAS have a single power supply and no redundant network ports. For critical data, consider a UPS and a second NIC.
  • Overheating: Eight drives generate a lot of heat. Ensure the NAS has adequate ventilation and consider a model with dual fans.

Costs and Budget Considerations

The price of an 8-bay NAS varies widely: from around $500 for a basic model to over $2000 for a high-end one with 10GbE and a powerful CPU. The drives are often the bigger cost—eight 12TB drives can cost $2000 or more. Also factor in the cost of a UPS, extra RAM, and possibly a 10GbE switch.

Consider the total cost of ownership, including power consumption. An 8-bay NAS with eight drives can draw 80-120W, which adds up over a year. Some models have efficient power supplies and idle modes.

Alternatives to an 8-Bay NAS

If you don’t need eight bays, consider a 4-bay NAS with larger drives (e.g., 4x20TB = 80TB raw). This saves money and space. Or build a DIY NAS using a PC case with 8 hot-swap bays and software like TrueNAS. This gives more flexibility but requires more technical skill.

For enterprise needs, a rackmount 8-bay NAS (like a 2U unit) might be better, but it’s louder and requires a rack. Cloud storage is another alternative, but for large media libraries, local storage is often faster and cheaper.

Frequently Asked Questions

Can I mix different drive sizes in an 8-bay NAS?

Yes, but the RAID configuration determines how usable space is calculated. Traditional RAID 5/6 uses the smallest drive as the base, so mixing sizes wastes space. Synology SHR and QNAP RAID groups allow you to use different sizes more efficiently, but you still can’t exceed the capacity of the smallest drive in a mirrored pair.

How much RAM do I need for an 8-bay NAS?

For basic file sharing, 4GB is enough. For Plex transcoding, Docker containers, or ZFS, you need at least 8GB, but 16GB is recommended. Check the maximum supported RAM; some models cap at 32GB.

Is 10GbE worth it for an 8-bay NAS?

If you have multiple users or work with large files (video editing, database backups), yes. 10GbE gives you about 1,100 MB/s, which is 10x faster than 1GbE. However, you also need a 10GbE switch and a 10GbE NIC in your computer, which adds cost.

Can I use SAS drives in a consumer 8-bay NAS?

Most consumer NAS only support SATA drives. SAS drives are for enterprise systems with a SAS controller. If you need SAS, look for a rackmount NAS that explicitly supports it.

What is the difference between SHR and RAID 5?

SHR (Synology Hybrid RAID) is a proprietary system that allows mixed drive sizes and easier expansion. RAID 5 is a standard that uses one drive for parity. SHR is more flexible but only works with Synology. QNAP has a similar feature called RAID groups.

How long does a RAID rebuild take on an 8-bay NAS?

It depends on drive size and NAS speed. For 12TB drives, a rebuild can take 1-3 days. During the rebuild, the NAS is vulnerable to another drive failure, so always have a backup.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →