Yes, Xiaomi’s Mi Smart Curtain can be controlled by voice. You can open, close, and stop the curtains using voice commands through Google Assistant, Amazon Alexa, or Xiaomi’s own XiaoAI assistant, depending on the model and how you set it up. This article explains exactly how voice control works, what you need, and how to set it up.
Formula
The calculator above estimates the opening speed of your curtain track. The formula is:
Speed (cm/s) = Track length (cm) / Time to fully open (s)
Where:
- Track length is the total length of the curtain track in centimeters (cm).
- Time to open is the time in seconds (s) it takes for the curtain to fully open.
This is a simple way to compare the performance of different track lengths or to check if your motor is moving at the expected speed.
Worked Example
Using the default values: track length = 300 cm, time to open = 30 s.
Speed = 300 cm / 30 s = 10 cm/s.
The calculator shows 10.0 cm/s. This means the curtain moves at a rate of 10 centimeters per second.
Why Voice Control Matters
Voice control turns a motorized curtain into a hands-free smart home device. Instead of reaching for a remote or an app, you simply speak a command. This is especially useful when your hands are full (carrying laundry, holding a coffee), when you are already in bed, or when you want to incorporate the curtains into a larger automation routine (like saying “Good morning� to your smart speaker and having the curtains open along with the lights turning on).
Which Xiaomi Curtain Models Support Voice?
Xiaomi offers several curtain products under its Mijia (Mi Home) brand. The most common are:
- Mijia Smart Curtain Motor (Wi-Fi) – This is a retrofit motor that attaches to your existing curtain rod. It is controlled via the Mi Home app and supports voice assistants.
- Mijia Smart Curtain Motor (Zigbee) – This version requires a Zigbee hub (like the Mijia Smart Hub) to connect to Wi-Fi. Once connected, it also supports voice control.
- Mijia Curtain Track (with motor) – A complete track system with an integrated motor, often sold as a bundle. Voice control works the same way.
All of these models work with the Mi Home app, and through that app, you can link them to Google Assistant or Amazon Alexa. Some models also natively support XiaoAI, Xiaomi’s own voice assistant, which is built into Xiaomi smart speakers.
How to Set Up Voice Control
Setting up voice control is straightforward, but the exact steps depend on which assistant you use. Here is a general guide:
- Install the curtain motor according to the included manual. Make sure it is powered and the curtain moves smoothly.
- Download the Mi Home app (available for iOS and Android) and create an account if you don’t have one.
- Add the device in the app by tapping “+� and selecting “Curtain� or scanning the QR code on the motor. Follow the in-app instructions to connect it to your Wi-Fi network.
- Link to a voice assistant:
- Google Assistant: In the Google Home app, go to “Add� → “Set up device� → “Works with Google� and select “Xiaomi Mi Home.� Log in with your Mi Home account and authorize the connection. Your curtains will appear as a device.
- Amazon Alexa: In the Alexa app, go to “Skills & Games� and search for “Xiaomi Mi Home.� Enable the skill, log in, and link your account. Then say “Alexa, discover devices.�
- XiaoAI: If you have a Xiaomi smart speaker, the curtain should be automatically available after adding it to Mi Home, as long as the speaker and the curtain are on the same account.
After linking, you can use voice commands like:
- “Hey Google, open the curtains.�
- “Alexa, close the living room curtains.�
- “XiaoAI, set the curtains to 50%.�
Common Voice Commands and Limitations
The exact phrases you can use depend on the assistant. In general, you can ask to open, close, stop, or set a specific position (e.g., 30% open). However, not all assistants support every action. For example, Google Assistant may only allow open/close, while the Mi Home app itself offers fine-grained control.
One limitation is that voice control requires an internet connection. If your Wi-Fi goes down, the curtains will not respond to voice commands, but the physical remote or manual pull (if available) may still work. Also, the curtain motor must be powered; if it is battery-operated, the battery needs to be charged.
Comparing Voice Control with Other Methods
Voice control is just one of several ways to operate the Mi Smart Curtain. Here is a quick comparison:
- Mi Home App: Full control, including schedules, timers, and percentage settings. Works anywhere with internet.
- Physical Remote: A small remote control that works via RF or IR (depending on the model). No internet needed, but you have to be within range.
- Manual Pull: Most motors allow you to pull the curtain manually, which disengages the motor temporarily. Good for emergencies or when power is out.
- Automation: You can set the curtains to open at sunrise or close at a specific time. This is done in the Mi Home app and does not require voice.
Frequently Asked Questions
Can I use voice control without a Xiaomi speaker?
Yes. If you have a Google Home or Amazon Echo, you can link your Mi Home account to those assistants and use voice commands. You do not need a Xiaomi speaker specifically.
Why won’t my curtains respond to voice commands?
First, check that the curtain is online in the Mi Home app. Then, make sure the voice assistant is linked to the same Mi Home account. Also, try using the exact device name you set in the app (e.g., “Living Room Curtain�). If it still fails, unlink and relink the skill in the assistant app.
Can I control the curtain with Google Home if I’m outside my home?
Yes, as long as the curtain is online and your Google Home app is connected to the internet. You can use the Google Home app or a voice command from your phone to control it remotely.
Does the Mi Smart Curtain work with Apple HomeKit?
Most Xiaomi curtain motors do not natively support HomeKit. However, you can use a third-party bridge like Homebridge to integrate it, but that requires technical setup and is not officially supported.
What is the difference between the Wi-Fi and Zigbee versions?
The Wi-Fi version connects directly to your router, so it works without a hub. The Zigbee version requires a Zigbee hub (like the Mijia Smart Hub) to bridge to Wi-Fi. The Zigbee version may be more stable in large homes with many devices, but the Wi-Fi version is simpler to set up.
Can I set a voice command to open the curtains halfway?
Yes, if your assistant supports percentage commands. For example, you can say “Hey Google, set the curtains to 50%.� If the assistant does not understand, you can create a routine in the Mi Home app that sets a specific position and then trigger that routine with a custom voice phrase.
Related
Formula used
in t | Time to open (s) | s | 30 | 1 | 300 out speed | Opening speed (cm/s) | cm/s | 300 / t | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Poco X3 GT Dimensity 1100 67W Fast Charging Launched?5.00 min/km
- Flash Converter: What It Is & How to Use It
- Choosing a Pipe Flow Meter for Swirling Flow
- Motorola Phone Recovery: How to Recover Data
- Convert 2D Videos to Oculus Rift VR: How-To
- DRAM Light on Motherboard: Meaning & Fixes5.00 min/km