The Yale Approach is a keypad-only smart lock that lets you lock and unlock your door with a PIN code, a smartphone, or a physical key, and it works with Apple HomeKit and the Yale Access app. You enter a code on the touchscreen keypad or use your phone to control it, and the lock responds instantly. This guide explains how the Approach works, how to install and use it, and what to consider before buying.
What Is the Yale Approach?
The Yale Approach is a smart deadbolt that replaces your existing deadbolt. It has a backlit touchscreen keypad on the outside and a motorized latch on the inside. Unlike some smart locks, it does not have a fingerprint reader or a built-in Wi-Fi module. Instead, it connects to your phone via Bluetooth, and you can add a separate Wi-Fi bridge (the Yale Smart Home module) if you want remote access. The lock is designed for DIY installation and fits most standard US doors.
How the Keypad Works
The keypad is a capacitive touchscreen that lights up when you touch it. You enter a 4-8 digit PIN, and the lock turns the latch automatically. The lock also has a physical key cylinder as a backup, so you can always get in even if the battery dies. The keypad is weather-resistant, but it is not rated for extreme cold or direct rain, so you may want to install it under a covered porch.
Installation and Setup
Installing the Approach takes about 15-30 minutes with a screwdriver. You remove your old deadbolt, slide the new latch into the door edge, and mount the exterior and interior components. The lock uses two AA batteries, which are included. After installation, you open the Yale Access app (iOS or Android), create an account, and follow the prompts to add the lock. The app will guide you through connecting via Bluetooth and setting up a master PIN.
Using the Yale Access App
The Yale Access app is the main control center. You can:
- Lock and unlock the door from your phone when you are within Bluetooth range (about 30 feet).
- Create permanent or temporary PIN codes for family, guests, or service workers.
- Set schedules for codes, so a house cleaner can only enter on Tuesdays between 9 AM and 11 AM.
- See a log of every lock/unlock event, with timestamps and the code used.
- Receive push notifications when the door is locked or unlocked.
If you add the Yale Smart Home module (sold separately), you can control the lock from anywhere via the app, and it will work with Amazon Alexa or Google Assistant. Without the module, you are limited to Bluetooth range.
Compatibility and Smart Home Integration
The Approach works with Apple HomeKit out of the box, meaning you can use Siri voice commands and the Apple Home app. For example, you can say “Hey Siri, lock the front door.” It is also compatible with the Yale Access app on Android and iOS. If you want to use Alexa or Google Assistant, you need the Smart Home module. The lock does not support Z-Wave or Zigbee, so it will not work with Samsung SmartThings or other hubs that use those protocols.
Security and Safety Features
The Approach has a few important security features:
- Auto-lock: You can set the lock to automatically relock after a certain time (e.g., 30 seconds).
- One-touch locking: Press the Yale logo on the keypad to lock the door without entering a code.
- Battery indicator: The app shows battery level, and the lock beeps when batteries are low.
- Manual key override: The physical key works even if the electronics fail.
One common misconception is that keypad locks can be easily hacked. In reality, the Approach uses encrypted Bluetooth communication, and the PIN is stored locally on the lock, not in the cloud. However, like any lock, it is not invulnerable. A determined thief with physical access could pick the cylinder or use a bypass tool, but that is true for most residential locks.
Common Problems and Troubleshooting
Users sometimes report issues:
- Keypad not lighting up: Check that the batteries are installed correctly and have charge. If the lock is too cold (below 0°F), the keypad may be sluggish.
- Cannot connect to Bluetooth: Make sure your phone’s Bluetooth is on and you are within range. Restart the app or your phone.
- Lock is jammed: The latch may be misaligned. Check that the strike plate is aligned and the door closes smoothly.
- Forgot master PIN: You can reset the lock by removing the batteries, then reinserting them while pressing the keypad’s Yale logo. This resets to factory defaults, and you can set a new master PIN in the app.
Cost and Value
The Yale Approach is priced in the mid-range for smart locks, typically around $150-200. The Yale Smart Home module adds about $50-80. Compared to other smart locks, it is cheaper than models with built-in Wi-Fi or fingerprint readers, but it lacks those features. If you only need keypad access and Apple HomeKit, the Approach is a solid value. If you need remote access without buying extra modules, consider a lock with built-in Wi-Fi.
Alternatives to Consider
If the Approach does not fit your needs, here are common alternatives:
- Yale Assure Lock 2: A newer model with more connectivity options, including Z-Wave and Wi-Fi versions.
- August Wi-Fi Smart Lock: Retrofits over your existing deadbolt and offers built-in Wi-Fi.
- Schlage Encode: Has built-in Wi-Fi and works with Alexa, Google, and the Schlage app.
- Kwikset Halo: A budget option with Wi-Fi and a touchscreen keypad.
Each has different trade-offs in price, connectivity, and design.
Frequently Asked Questions
Does the Yale Approach work without Wi-Fi?
Yes, the lock works via Bluetooth, so you can use the keypad and the app when you are nearby. For remote access, you need the optional Yale Smart Home module.
Can I use the keypad if the batteries die?
No, the keypad requires power. But you can use the physical key to unlock the door. The lock also has a 9V battery terminal on the outside (under the keypad) that lets you temporarily power it with a 9V battery to enter a code.
How many PIN codes can I create?
You can create up to 20 unique PIN codes in the app, each with its own schedule and name.
Is the Yale Approach compatible with Apple HomeKit?
Yes, it is HomeKit-compatible out of the box. You can add it to the Apple Home app and use Siri voice control.
Can I install the lock on a metal door?
Yes, but you may need to use longer screws and ensure the door is thick enough (the lock fits doors from 1.375 to 2.125 inches thick). Metal doors can sometimes interfere with Bluetooth range, but it is usually fine.
Does the lock work with Alexa or Google Assistant?
Only if you purchase the Yale Smart Home module. Without it, the lock only supports Apple HomeKit and the Yale Access app.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Microsoft Surface Duo: The Foldable Phone Story
- Samsung SM-T813 Hard Reset: Step-by-Step Guide
- Mafia Clash Codes: Real Meanings & Usage
- Remove Programs from Mac: Full Uninstall Guide
- Project Sentinel Morning Digest: Data Stack Failure Alerts
- Best KVM VPS Hosting: Top Picks & Guide