Your phone is not as waterproof as you think. IP68 ratings mean the phone survived lab testing in clean, still water, not that it is immune to damage in real-world conditions like saltwater, soapy water, or high-pressure jets. This article explains what the rating actually covers, where the limits are, and how to keep your phone safe.
What IP68 Actually Means
The IP (Ingress Protection) code is an international standard (IEC 60529) that classifies the degree of protection against solids and liquids. The first digit (6) means the device is dust-tight. The second digit (8) means the device can be continuously immersed in water under conditions specified by the manufacturer. However, the standard does not define the depth or duration—that is up to each manufacturer. So an IP68 phone from one brand might be rated for 1.5 meters for 30 minutes, while another is rated for 6 meters for 24 hours. Always check the fine print in the spec sheet.
Why Real-World Conditions Are Harsher
Lab tests are done in fresh water at a constant temperature, with the phone stationary and the seals brand new. Real life is different:
- Saltwater is corrosive and more conductive than fresh water. It can corrode the charging contacts or the speaker mesh even if the phone survives the dunk.
- Chlorinated pool water can degrade the rubber gaskets over time.
- Soapy water reduces surface tension, allowing water to seep into tiny gaps more easily.
- Moving water (from a river, a boat wake, or a shower) creates pressure that can exceed the static pressure rating.
- Temperature changes cause air inside the phone to contract, creating a slight vacuum that can suck water in through micro-gaps.
Common Ways Phones Get Damaged
Even with a high IP rating, users often report water damage after these activities:
- Taking photos underwater in a pool (chlorine + movement).
- Dropping the phone in the ocean (saltwater corrosion).
- Using the phone in a hot shower (steam can penetrate).
- Accidentally dropping the phone in a toilet (contaminated water can carry bacteria and cause corrosion).
- Exposing the phone to a high-pressure washer or faucet.
In each case, the phone’s seals may be fine, but the water chemistry or pressure exceeds what the rating covers.
How to Choose a Water-Resistant Phone
If water resistance is a priority, look beyond the IP rating:
- Check the manufacturer’s specific depth and duration claims—not just the IP code.
- Look for a phone with a higher rating like IP68 (vs. IP67) and a stated depth of at least 1.5 m.
- Consider phones that have undergone military-standard (MIL-STD-810G) testing, though that doesn’t guarantee water resistance.
- Remember that the rating applies to a new, undamaged device. A cracked screen or worn SIM tray gasket will compromise it.
What to Do If Your Phone Gets Wet
If your phone gets wet beyond its rating, act quickly:
- Turn it off immediately and do not press buttons (which can push water deeper).
- Dry the exterior with a soft cloth.
- Remove the SIM tray and dry the interior if possible.
- Place the phone in a dry, well-ventilated area (not in rice—rice dust can get into ports).
- Wait at least 24–48 hours before turning it on.
If the phone has been in saltwater, rinse it with fresh water (if it’s rated for immersion) and dry it, but be aware that corrosion may have already started.
Warranty and Insurance
Most manufacturers do not cover water damage under the standard warranty, even if the phone carries an IP rating. Water damage is typically classified as accidental damage. Check if your credit card or home insurance offers accidental damage coverage, or consider a separate phone insurance plan. Read the terms carefully—some plans exclude water damage or require a deductible.
Frequently Asked Questions
Can I take my IP68 phone swimming?
Not recommended. The rating is for accidental submersion, not active use in a pool or ocean. Chlorine and saltwater can corrode seals and ports, and movement increases pressure. If you must, use a waterproof case.
Does IP68 mean my phone is safe in the shower?
No. Hot water and steam can penetrate seals that are rated for cold water immersion. The heat expands and contracts components, and steam can condense inside the phone.
Why does my phone’s speaker sound muffled after getting wet?
Water can get trapped in the speaker mesh. Many phones have a feature that emits a sound to expel water (like Apple’s Water Eject shortcut or Samsung’s Galaxy Buds app). You can also try gently shaking the phone or using a low-frequency tone from a speaker app.
Is the IP rating permanent?
No. The seals degrade over time due to heat, drops, and normal wear. A phone that was IP68 when new may lose its water resistance after a year or two, especially if it’s been dropped or serviced.
Does a cracked screen mean water can get in?
Yes. The screen is part of the sealing system. A crack, even a hairline one, provides a path for water to reach the internal components. Avoid exposing a cracked phone to water.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Don’t Steal the Bobo Codes? Meaning & Origin6.00 min/km
- Best Game Server Hosting for Smooth Gameplay
- Jump Stars Codes: Active Codes & How to Redeem
- Google Backup: What It Backs Up and How It Works
- Emulating Sega Dreamcast on Mac: Full Guide
- Arcane Odyssey Codes: Full List & How to Redeem