Yes, you can join a Zoom meeting by phone using a dial-in number, even without a smartphone or the Zoom app. You enter the meeting ID and passcode using your phone keypad, and you participate through a standard voice call. This guide explains how the dial-in system works, how to find the right number, and what to expect when you call in.
How Zoom Dial-In Numbers Work
Zoom’s dial-in feature is a standard audio conferencing bridge. When a meeting host enables it, Zoom assigns one or more local phone numbers for the meeting. Participants call the number, and the automated system asks for the meeting ID followed by the # key. If the host has set a passcode, you enter that after the meeting ID. Once connected, you are in the audio portion of the meeting, and you can speak and listen just like someone on a computer.
The dial-in numbers are not unique to each meeting. Zoom maintains a large pool of numbers in many countries, and the same number can serve thousands of meetings. The meeting ID is what routes you to the correct meeting. This is why you must enter the full meeting ID, not just the last few digits.
How to Find the Dial-In Number for a Meeting
There are three common places to find the dial-in information, depending on how the host sent the invitation.
- Email invitation: Scroll to the bottom of the meeting invitation email. Zoom includes a section titled “Dial by your location” with a list of numbers and their associated countries/cities.
- Zoom app (meeting details): Open the meeting in your Zoom app and tap “Join.” The dial-in numbers are usually shown on the “Join Meeting” screen under “Phone” or “Dial-In.”
- Calendar invite: If the meeting was created in Outlook or Google Calendar, the dial-in numbers are typically listed in the body of the calendar event, often in the same “Dial by your location” block.
If you cannot find the numbers, ask the host to send them. The host can also enable “Call Me” – a feature where Zoom calls your phone directly, and you just press 1 to join.
What You Need to Dial In
To join by phone, you need three pieces of information:
- The dial-in phone number – a local or toll-free number from the invitation.
- The meeting ID – a 9, 10, or 11-digit number. It is often shown as XXX-XXX-XXXX in the invitation, but you can ignore the dashes when dialing.
- The meeting passcode – a numeric code, usually 6-8 digits. If the host set one, you will hear a prompt asking for it after you enter the meeting ID.
Some meetings also require a participant ID if you want to be identified by name. This is a short number you enter after the passcode, and it links your phone audio to your video/computer presence. Without it, you will appear as a separate “phone” participant.
Step-by-Step: Joining by Phone
- Dial the provided phone number from your device.
- When prompted, enter the meeting ID followed by the # key.
- If asked for a passcode, enter it followed by #.
- If prompted for a participant ID, enter it followed by #. (If you don’t have one, just press # to skip.)
- Wait for the host to admit you if the meeting is locked, or you will be placed on hold until the meeting starts.
- Once connected, you are in the audio meeting. Use *6 to mute/unmute yourself.
If you are the host and dialing in, you may need to enter the host key instead of the passcode to get host controls. The host key is a 6-digit number found in your Zoom profile settings.
Costs and International Dialing
Dialing into a Zoom meeting is not free in most cases. The call is billed as a regular phone call to the number you dial. If you call a local number, you pay your standard local call rate. If you call a toll-free number, it is free from landlines in the country, but mobile carriers may still charge. For international numbers, you pay international rates from your carrier.
Zoom itself does not charge participants for dialing in – the cost is entirely on your phone bill. The meeting host pays Zoom for the dial-in feature as part of their subscription, but you do not pay Zoom directly. To avoid surprises, check your phone plan for international calling rates before dialing a foreign number.
Common Problems and Solutions
Several issues can arise when joining by phone. Here are the most frequent ones and how to resolve them.
- “Meeting ID not found” – Double-check the meeting ID. A common mistake is typing an “O” for zero or “l” for one. Also, make sure you are using the full ID, including any leading zeros.
- Passcode not accepted – The passcode is case-sensitive? No, it is numeric only. If it fails, ask the host to confirm the passcode. Some hosts use a personal meeting ID (PMI) that has a permanent passcode, which may differ from the one in the invitation.
- Can’t hear anyone – Check if your phone is on mute. Press *6 to unmute. Also, ensure the meeting audio is not set to “computer audio” only – but that is a host setting, not yours.
- No dial-in numbers in the invitation – The host may have disabled dial-in for that meeting. Ask the host to enable it in the meeting settings.
- Call drops – Poor cellular signal can drop the call. If this happens, simply call back and re-enter the meeting ID. You will be reconnected.
Phone vs. Computer Audio: Which to Use
Joining by phone is a fallback, not a primary method for most users. Here is a quick comparison:
- Phone audio – Uses your cellular minutes, no internet required, better call quality in low-bandwidth areas, but you cannot see the screen share or video.
- Computer audio – Uses your internet connection, free, allows screen sharing and video, but can suffer from echo or poor quality on weak Wi-Fi.
- Both (call me + computer) – You can join by computer for video and also dial in for audio, but you must enter your participant ID to link them. This is useful if your computer microphone is broken but you still want to see the presentation.
For most users, computer audio is the better choice because it is free and full-featured. Use phone dial-in only when you are away from a computer or have no reliable internet.
Frequently Asked Questions
Can I join a Zoom meeting by phone without the app?
Yes. The dial-in number works from any phone – landline, cell, or VoIP – without installing anything. You just dial, enter the meeting ID and passcode, and you are in the audio meeting. You will not have video or screen sharing, but you can fully participate in the conversation.
Is there a charge for Zoom dial-in numbers?
Zoom does not charge participants, but your phone carrier may. Local numbers are usually billed as local calls, toll-free numbers are free from landlines, and international numbers incur international rates. Check your plan if you are worried about costs.
What is the participant ID for when I dial in?
The participant ID links your phone audio to your computer or app session. If you join by computer first, then dial in, you can enter that ID to combine the two, so you get audio through the phone but still see the screen share on your computer. Without it, you appear as two separate participants.
Why does the meeting ID have 10 digits but I only have 9?
Zoom meeting IDs are typically 9, 10, or 11 digits. Some hosts use a Personal Meeting ID (PMI) that is shorter. If you have a 9-digit ID, just enter it as is – the system will recognize it. Do not add extra digits.
Can I dial in if the meeting is locked (waiting room enabled)?
Yes, but you will be placed in a waiting room or on hold until the host admits you. The host will see a “phone” participant and can admit you. You may need to state your name when prompted, as the host cannot see your caller ID.
What does *6 do when I am on a Zoom call?
*6 toggles mute/unmute for your phone line. It is the most common phone command. Other commands include *9 to raise your hand (if the host enabled it) and *0 to request the host’s attention.
Related
Formula used
in t | Call duration | min | 30 | 0 | 1440 in p | Meeting ID length | digits | 10 | 9 | 12 out cost | Estimated cost | USD | 0 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Unbox ASMR Codes: What They Are & How to Use5.00 min/km
- Repurposed Old Motorola Phone for Homelab?
- How to Evaluate AI Vendors for Data Security, Privacy & Compliance
- Best Ergonomic Mouse: Top Picks & Buying Guide
- Captions in Google Slides: How to Add & Format Them
- Use Mac Type in Japanese? Full Guide