If you see an unexpected metric on your Apple Watch, it usually comes from the Health app, a third-party app, or a watchOS feature that you didn’t explicitly set up. This article explains what those unknown metrics are, where they come from, and how to identify or remove them.
What Is an “Unknown Tracking Metric”?
An unknown tracking metric is any data point that appears in the Fitness app, Activity rings, or Health app that you don’t recognize. Common examples include:
- “Walking Steadiness” – a percentage that estimates balance during walking
- “Cardio Fitness” (VO₂ max) – a number that estimates aerobic capacity
- “Environmental Sound Levels” – decibel readings from the watch microphone
- “Blood Oxygen” – percentage of oxygen in your blood (on compatible models)
- “Time in Daylight” – minutes spent outdoors, estimated from ambient light
These metrics appear automatically because watchOS enables certain sensors by default. For example, the accelerometer and gyroscope continuously collect motion data, which the Health app uses to calculate steps, distance, and even sleep stages. The optical heart sensor tracks heart rate throughout the day, and the blood oxygen sensor (on Series 6 and later) periodically measures blood oxygen during sleep or when you initiate a reading.
Why Do Unknown Metrics Appear?
There are three main sources:
- Automatic background measurements – The watch records data like heart rate, steps, and environmental sound without you opening any app. For instance, the Noise app measures decibels periodically and stores the data in the Health app.
- Third-party app data – Apps you’ve installed (e.g., Strava, MyFitnessPal, Sleep Cycle) can write data to the Health app. If you granted permission, that data appears in Health categories you may not have checked.
- watchOS features – Features like “Handwashing” (which uses motion and microphone) or “Fall Detection” (which uses accelerometer) generate metrics only when triggered. For example, after a fall, the watch records the event and may show “Number of Falls” in the Health app.
Another less common source is a software glitch. After a watchOS update, some users report duplicate or mislabeled entries (e.g., a heart rate reading logged as “Resting Heart Rate” when it was actually a workout reading). These are usually temporary and resolve after a restart.
How to Identify the Source of an Unknown Metric
To trace a metric back to its origin:
- Open the Health app on your iPhone.
- Tap the Browse tab (bottom right).
- Select a category (e.g., “Heart,” “Activity,” “Body Measurements”).
- Tap the specific metric (e.g., “Heart Rate Variability”).
- Scroll to the bottom and tap “Show All Data” – this lists every entry with a timestamp.
- Tap any entry to see which app or device wrote it (e.g., “Apple Watch” or a third-party app).
If the metric appears only in the Fitness app (the rings), it’s likely from your watch’s own sensors. For example, “Stand Hours” are derived from wrist motion, and “Exercise Minutes” come from any activity that raises your heart rate above a threshold.
How to Turn Off or Hide Unknown Metrics
You can disable most automatic metrics:
- Heart Rate – On your iPhone, go to Watch app → Privacy → Heart Rate → toggle off.
- Blood Oxygen – Watch app → Blood Oxygen → toggle off.
- Environmental Sound Levels – Watch app → Noise → toggle off “Environmental Sound Measurements.”
- Walking Steadiness – Watch app → Health → Walking Steadiness → toggle off “Notifications” (the metric itself still records, but you won’t see alerts).
- Time in Daylight – Watch app → Privacy → Time in Daylight → toggle off.
To hide a metric from the Health app’s “Favorites” (the summary page), tap “Edit” at the top right, then remove the metric from the list. To delete historical data, go to the metric’s page, tap “Edit” (top right), then “Delete All” or delete individual entries.
Common Problems and Misconceptions
“Why does my watch show a metric I never enabled?” – Apple enables many sensors by default for safety and health tracking. For example, Fall Detection is on by default for users 55 and older, and it records falls even if you never opened the Fall Detection settings.
“Is my watch tracking me without permission?” – No. All data stays on your device unless you explicitly share it with third-party apps. The Health app shows a “Privacy” tab where you can see which apps have access to which data.
“Why is my VO₂ max so low?” – Cardio Fitness is estimated from outdoor walks or runs, and it can be affected by age, weight, and even the watch’s fit. A low reading doesn’t necessarily mean a health problem; it’s an estimate, not a clinical measurement.
“Why does my watch show a metric that I can’t find in the Health app?” – Some metrics are only visible in the Fitness app (like “Stand Hours”) or only in the watch’s own settings (like “Noise Level” in the Noise app). They aren’t all stored in Health.
Comparing Apple Watch Metrics to Other Trackers
Apple Watch uses a combination of accelerometer, gyroscope, optical heart sensor, and GPS (on GPS models). Unlike dedicated fitness trackers, it doesn’t have a separate “activity” mode for every sport; instead, it uses the Workout app to categorize activities. For example, a “Mixed Cardio” workout uses the same sensor data as a “Running” workout, but the algorithm adjusts calorie estimates based on the activity type.
One key difference: Apple Watch measures “Active Energy” (calories burned during activity) and “Resting Energy” (basal metabolic rate) separately. Many other trackers show a single “calories” number, which can confuse users when they see two different values.
Costs and Data Privacy
There is no additional cost to view metrics on the Apple Watch; all features are included with watchOS. However, some third-party apps that write data to Health (e.g., advanced sleep analysis) require a subscription. Apple’s own Health app is free and does not sell your data. All health data is encrypted on your device and in iCloud (if you enable Health sync).
If you’re concerned about privacy, you can revoke app permissions at any time: Health app → Sharing → Apps → tap an app → toggle off all categories.
Safety and Accuracy Notes
Apple Watch metrics are not medical devices. For example, blood oxygen readings are not intended for medical use, and the ECG app (on Series 4 and later) is not a substitute for a doctor’s diagnosis. If you see a metric that seems alarming (e.g., a very high heart rate), consult a healthcare professional. Also, the watch’s sensors can be affected by skin contact, watch fit, and movement, so readings may vary.
Alternatives to Apple Watch for Tracking
If you want more control over what metrics are tracked, you have options:
- Wear the watch on a different wrist – This can change sensor readings, but it doesn’t add or remove metrics.
- Use a third-party app that only tracks specific metrics – For example, a dedicated sleep tracker that only writes sleep data.
- Turn off all background measurements – You can disable heart rate, blood oxygen, and noise, leaving only step counting and workout tracking.
- Switch to a basic fitness tracker – Devices like simple step counters don’t have the same array of sensors, so fewer unknown metrics appear.
Frequently Asked Questions
Why does my Apple Watch show a metric I never enabled?
Apple enables many sensors by default for features like fall detection, heart rate monitoring, and noise alerts. You can turn these off in the Watch app on your iPhone under Privacy or the specific feature’s settings.
Can I delete unknown metrics from the Health app?
Yes. Go to the metric’s page in the Health app, tap “Edit” (top right), then “Delete All” to remove all data, or swipe left on individual entries to delete them. Note that deleting data from Health may affect your Activity rings history.
Will turning off a metric stop the watch from collecting it?
In most cases, yes. For example, turning off “Heart Rate” in the Watch app stops the watch from taking background heart rate measurements. However, some metrics like steps are always collected because they’re fundamental to the Activity rings.
Why does my watch show “Walking Steadiness” when I never set it up?
Walking Steadiness is automatically calculated from motion data when you walk. It appears in the Health app without any setup. You can disable notifications for it, but the calculation itself continues as long as the watch is worn.
Are these metrics accurate enough to make health decisions?
Apple Watch metrics are estimates and not intended for medical diagnosis. For example, heart rate readings are generally accurate, but blood oxygen and VO₂ max have larger error margins. Always confirm any concerning reading with a doctor.
How do I know if a third-party app is adding metrics?
Open the Health app → Browse → select a metric → tap “Show All Data” → tap an entry. The source (e.g., “MyFitnessPal”) will be listed. You can revoke that app’s permission under Health → Sharing.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- After Effects Essential Tools Explained
- Self-Hosting Email: Why I Refuse (and You Might Too)
- Virtual Machines at Home: My Obsession Explained
- HP AI Printer Feature: Does It Actually Make Sense?
- Tailscale Self-Signed Certificate Warning Fix
- OneDrive Setup That Stops the Annoyance