keepcalculator

06 Numbers and Powers

Assassin’s Creed Shadows on Older Graphics Cards

Card No. 06·84098 · Updated · Standard formula, shown below

Yes, Assassin’s Creed Shadows will run on older graphics cards, but the experience will vary significantly depending on the card’s age and VRAM. Ubisoft has confirmed that the game will support GPUs as old as the GTX 1070 and RX 5700, though these are the minimum requirements and will only deliver 30 FPS at 1080p with upscaling. For a smoother experience, you’ll likely need a more recent card with at least 8GB of VRAM, as the game’s open world and ray tracing features are demanding.

Official System Requirements and What They Mean

Ubisoft has published official system requirements for Assassin’s Creed Shadows, which give us the clearest picture of what older hardware can expect. The minimum specs call for a GTX 1070 or RX 5700, paired with a Ryzen 5 3600 or i7-8700K, 16GB of RAM, and an SSD. These are the absolute floor for the game to run at 1080p with low settings and 30 FPS, using upscaling (like FSR or DLSS) to achieve that. The recommended specs jump to an RTX 2070 or RX 6700 XT, which target 60 FPS at 1080p with high settings.

It’s crucial to understand that these requirements are for the game’s “standard” mode, which uses rasterized lighting. The game also has a “ray tracing” mode that requires a GPU with dedicated ray tracing hardware, meaning cards like the GTX 10-series and RX 5000-series will not be able to use it. For that mode, you’ll need at least an RTX 2060 or RX 6600 XT, and even then, performance will be lower.

How Older Cards Will Perform: A Realistic Look

If you’re using a card that meets the minimum requirements, expect to play at 1080p with low or medium settings and a frame rate target of 30 FPS. This is achievable thanks to upscaling technologies like FSR (FidelityFX Super Resolution) and DLSS, which render the game at a lower internal resolution and then upscale it. For example, a GTX 1070 might run the game at 1080p with FSR set to “Performance” mode, which renders at around 720p, to hit 30 FPS.

Cards that are a bit newer, like the RTX 2060 or RX 5600 XT, will have a better time, but still may need to use upscaling to maintain 60 FPS. The game’s open world is dense with foliage and dynamic lighting, which is heavy on the GPU. A card like the GTX 1660 Super, which is often considered a budget 1080p card, will likely struggle to maintain 30 FPS without significant compromises, as it lacks the raw power and VRAM (6GB) of the minimum spec cards.

VRAM: The Hidden Bottleneck

One of the most important factors for older graphics cards is VRAM (video memory). Assassin’s Creed Shadows is designed for current-gen consoles, which have 16GB of unified memory. On PC, the game can use more than 8GB of VRAM at high textures and 1080p. Cards like the GTX 1070 (8GB) and RX 5700 (8GB) have enough, but cards with only 6GB (like the GTX 1660 Ti or RTX 2060) may run into issues with texture pop-in or stuttering if you set textures to high. It’s recommended to stick to medium textures on 6GB cards to avoid these problems.

Upscaling Technologies: Your Best Friend

Upscaling is not just a buzzword; it’s the key to making older cards viable. The game supports both AMD FSR and NVIDIA DLSS. FSR works on all cards, including older ones, while DLSS is only available on RTX cards. Here’s how to use them effectively:

  • FSR (FidelityFX Super Resolution): Available on all GPUs. Use “Quality” mode if you want the best image quality, “Balanced” for a good middle ground, and “Performance” for a significant FPS boost.
  • DLSS (Deep Learning Super Sampling): Only on RTX cards. DLSS often provides better image quality than FSR, especially at lower resolutions. Use it if you have an RTX card.
  • Frame Generation: This is a newer feature (DLSS 3.5 and FSR 3) that can dramatically increase frame rates by generating new frames between rendered ones. However, it’s only available on RTX 40-series cards and some newer AMD cards. Older cards will not be able to use this feature.

Common Problems and How to Fix Them

Older cards may encounter specific issues. Here are a few common ones and their solutions:

  • Low FPS despite meeting requirements: Make sure you have the latest GPU drivers. Also, check that the game is not running in “ray tracing” mode, which is a separate graphics preset.
  • Texture pop-in: This is often due to insufficient VRAM. Lower the texture quality setting to medium or high (not ultra).
  • Stuttering: This can be caused by the game loading assets from a slow HDD. The game requires an SSD, and it’s highly recommended to install it on one.
  • Game crashes: Older cards may be more prone to crashes if they are overclocked or overheating. Monitor your temperatures and consider lowering the overclock.

Comparing Older Cards: Which One is Good Enough?

To give you a clearer idea, here’s a rough comparison of how different older cards will handle Assassin’s Creed Shadows at 1080p:

  • GTX 1070 / RX 5700: Minimum spec. Expect 30 FPS on low/medium with FSR.
  • GTX 1080 / RX 5700 XT: A bit better, but still around 30-40 FPS on medium with FSR.
  • RTX 2060 / RX 5600 XT: Can hit 60 FPS on medium with FSR/DLSS, but may drop in dense areas.
  • RTX 2070 / RX 6700 XT: Recommended spec. Should hit 60 FPS on high with upscaling.
  • GTX 1660 Super / RX 5500 XT: These will struggle. Expect 30 FPS on low with FSR, and even then, you may see stutters.

Frequently Asked Questions

Will Assassin’s Creed Shadows run on a GTX 1060?

No, the GTX 1060 is below the minimum requirement (GTX 1070). While the game might technically launch, it will likely be unplayable due to low FPS and potential crashes. You would need to use FSR in its most aggressive mode and set everything to low, but it’s not recommended.

Does the game require an SSD?

Yes, an SSD is a mandatory requirement. The game is designed to stream assets from the drive, and an HDD will cause severe stuttering and long loading times. A SATA SSD is sufficient, but an NVMe SSD is recommended for faster loading.

Can I use ray tracing on a GTX 1070?

No. Ray tracing requires dedicated hardware (RT cores) that is only present in NVIDIA RTX cards and AMD RX 6000 series and newer. GTX 10-series and RX 5000-series cards do not support ray tracing in this game.

What is the best way to improve FPS on an older card?

The most effective method is to enable upscaling (FSR or DLSS) and set it to “Performance” mode. This will reduce the internal resolution and significantly boost frame rates. Also, lower shadow quality and volumetric clouds, as these are very demanding settings.

Will the game run on a laptop with an older GPU?

It depends on the laptop GPU. A laptop RTX 2060 or better should be able to run the game, but laptop versions of older cards (like GTX 1060) are significantly weaker than their desktop counterparts and will likely not meet the minimum requirements. Check your laptop’s GPU against the desktop requirements and expect about 20% lower performance.

Is there a performance difference between the standard and ray tracing modes?

Yes, the ray tracing mode is significantly more demanding. Even on a high-end card like an RTX 3080, enabling ray tracing can cut frame rates in half. It’s recommended to use this mode only if you have a powerful RTX 30-series or newer card.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →