keepcalculator

06 Numbers and Powers

Capture Cards: What They Do & How to Use Them

Card No. 06·84104 · Updated · Standard formula, shown below

Capture cards are hardware devices that take video and audio from one source (like a game console, camera, or another computer) and send it to a second device (usually a PC) for recording or live streaming. You plug the source into the card, the card into your computer, and the card’s software or a streaming app grabs the feed. They exist because most consumer devices can’t output a clean, uncompressed video signal that a computer can easily record while also displaying it on a TV at the same time.

Why You Need a Capture Card

Modern consoles like the PlayStation 5 and Xbox Series X have built-in recording and streaming features, but they are limited. They typically record at a fixed bitrate, capture only what the console outputs, and can’t easily mix in a webcam, microphone, or custom overlays. A capture card gives you full control: you can record at a higher bitrate, use your own streaming software, and separate the game audio from your microphone audio.

Capture cards are also essential for streaming from a dual-PC setup. One computer runs the game, and the second computer handles the encoding and streaming. The capture card carries the video signal between them without putting any load on the gaming PC.

How a Capture Card Works

A capture card takes an HDMI (or sometimes DisplayPort) signal from your source device and converts it into a format your computer can read over USB or PCIe. The card does three main jobs:

  • Receives the signal – it reads the incoming video and audio data.
  • Converts it – it may change the resolution or frame rate, or simply pass the signal through.
  • Sends it to the PC – over USB 3.0, USB-C, or a PCIe slot, the data is transferred to your computer’s memory, where software like OBS Studio or Streamlabs can access it.

Most cards also have a “passthrough” port, so you can connect your console to the card and then from the card to your TV. This lets you play with zero lag while the card captures the same signal in the background.

Internal vs. External Capture Cards

There are two main form factors:

  • External cards – small boxes that connect via USB. They are portable, easy to set up, and work with laptops. They are ideal for console streaming or for capturing from a second PC. The downside is that USB bandwidth can be a bottleneck for very high resolutions and frame rates.
  • Internal cards – PCIe cards that install inside a desktop computer. They offer higher bandwidth and lower latency, making them the choice for professional or high-end streaming setups. They require a desktop with an available PCIe slot and are not portable.

How to Choose a Capture Card

When picking a capture card, consider the following:

  • Resolution and frame rate – do you need 1080p at 60fps, or 4K at 60fps? Make sure the card supports the output of your source.
  • Passthrough quality – if you play on a TV, the passthrough should support the same resolution and refresh rate as your display (e.g., 4K 120Hz for modern consoles).
  • Connection type – USB 3.0 or USB-C for external, PCIe for internal. Check your computer’s ports.
  • Software compatibility – most cards work with OBS Studio, but some have proprietary software. Check that the card works with your preferred streaming app.
  • Latency – for gaming, you want minimal delay between the source and the preview on your PC. Most modern cards have low enough latency for casual use, but internal cards are better for competitive play.

Common Problems and How to Fix Them

Capture cards can be finicky. Here are the most common issues and their fixes:

  • No signal – check that the HDMI cable is fully seated, the source is powered on, and the card is selected in your software. Try a different HDMI cable or port.
  • Audio is out of sync – this usually happens when the video and audio are recorded separately. In OBS, set the audio to “desktop audio” and the video to the capture card, then adjust the audio offset.
  • Video is choppy or laggy – reduce the capture resolution or frame rate, or lower the bitrate. Also make sure your USB port is 3.0 or higher (blue port) and not a USB 2.0 port.
  • HDCP errors – some devices (like Blu-ray players) use HDCP copy protection, which blocks recording. You can’t bypass HDCP legally, but many games don’t use it. If you see an error, try a different source or disable HDCP on the device if possible.

Capture Card vs. Software Recording

If you’re gaming on a PC, you might not need a capture card at all. Software like OBS Studio can record your screen directly with no extra hardware. Capture cards are only needed when the source is a separate device, like a console or a camera. For PC gaming, a capture card would add unnecessary cost and complexity.

However, if you want to record gameplay from a Nintendo Switch or a PlayStation, a capture card is the standard way to do it. Some consoles have built-in capture, but the quality and flexibility are usually worse than using a dedicated card.

Frequently Asked Questions

Do I need a capture card to stream on Twitch?

If you’re streaming PC games, no – you can use OBS Studio to capture your screen directly. If you’re streaming console games, yes, you need a capture card to get the console’s video into your computer.

What’s the difference between a capture card and a video converter?

A video converter changes the format of a video signal (e.g., HDMI to VGA) but does not send it to a computer for recording. A capture card takes the signal and makes it available to your computer as a video input device.

Can I use a capture card with a laptop?

Yes, if the laptop has a USB 3.0 or USB-C port. External capture cards work with laptops, but internal PCIe cards do not. Make sure your laptop meets the system requirements for the card.

Why does my capture card show a black screen?

This often happens because of HDCP (copy protection) or because the resolution is set too high for the card to handle. Try changing the source’s output resolution to 1080p, and check that HDCP is disabled on the source device.

How much storage do I need for recordings?

As a rough guide, 1 hour of 1080p60 footage at 50 Mbps is about 22.5 GB. At 4K60 with a higher bitrate, it can be 60 GB or more per hour.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →