keepcalculator

06 Numbers and Powers

Best HDMI Switch: Top Picks & Buying Guide

Card No. 06·74689 · Updated · Standard formula, shown below

The best HDMI switch overall is the Monoprice Blackbird 4K Pro (or its newer equivalent) because it offers reliable 4K/60Hz HDR support, auto-switching that actually works, and a solid metal build for under $50. It handles the most common setup—a TV with a few consoles and a streaming box—without the finicky handshake issues that plague cheaper switches. If you need 8K or advanced features like eARC, you’ll pay more, but for most people this is the sweet spot.

What to Look For

Before buying, focus on these five things—they matter more than brand or price:

  • HDMI version and bandwidth: For 4K at 60Hz with HDR, you need HDMI 2.0 (18 Gbps). For 4K at 120Hz or 8K, you need HDMI 2.1 (48 Gbps). Check the spec sheet—many cheap switches only do 4K/30Hz.
  • HDR support: If you watch HDR content, the switch must pass through HDR metadata. Look for “HDR10” or “Dolby Vision” in the description. Older switches strip HDR, making everything look washed out.
  • Number of inputs: Count your devices. A 3-port switch is enough for most, but if you have a console, streaming stick, soundbar, and PC, you’ll want 5 ports.
  • Switching method: Auto-switching (detects when a device turns on) is convenient but can be glitchy. Manual switching via remote or button is more reliable. Some switches have both—look for that.
  • Power supply: Always choose a switch with its own power adapter. Bus-powered switches (drawing power from the HDMI port) often fail with power-hungry devices or cause signal drops.

Top Picks

Monoprice Blackbird 4K Pro (3×1)

Strengths: This is the most reliable budget-friendly switch. It supports 4K/60Hz, HDR10, and Dolby Vision, and has a metal chassis that dissipates heat well. Auto-switching is fast (about 2 seconds) and rarely misfires. It comes with a small remote and also switches manually via a button.

Trade-offs: Only 3 inputs. No HDMI 2.1, so it won’t do 4K/120Hz or 8K. The remote is IR-only, so you need line-of-sight.

Who it’s for: Most people with a TV, a console, and a streaming device. It’s the default recommendation for a reason.

Kinivo 550BN (5×1)

Strengths: If you need more ports, this is the best 5-port switch under $50. It supports 4K/60Hz, HDR10, and Dolby Vision, and has both auto-switching and a remote. It also has a handy front-panel button for manual switching.

Trade-offs: The remote is IR and a bit cheap-feeling. Auto-switching can occasionally get confused if two devices are on simultaneously. The plastic body is fine but less premium.

Who it’s for: People with more than three devices—say, a PS5, Xbox, Switch, streaming stick, and a soundbar. It’s a great value for the port count.

Zettaguard 4×1 HDMI Switch (with 4K@60Hz)

Strengths: This is a no-frills option that just works. It supports 4K/60Hz and HDR10, and has a compact design that doesn’t block adjacent ports. It’s one of the few switches that handles HDCP 2.2 properly, so it won’t cause Netflix or Disney+ to fail.

Trade-offs: No remote—switching is done via a button on the unit. No auto-switching. It’s not ideal if the switch is hidden behind a TV stand.

Who it’s for: Budget buyers who don’t mind pressing a button. It’s also good for a desk setup where the switch is within reach.

AV Access 4×1 HDBaseT (with 4K@60Hz)

Strengths: This one is a step up in build quality and reliability. It has a metal case, supports 4K/60Hz and HDR10+, and includes both auto-switching and a remote. It also has a longer cable range (up to 15m) due to better signal amplification.

Trade-offs: Pricier than the Monoprice or Kinivo. No HDMI 2.1. The auto-switching has a slight delay (3-4 seconds) as it re-negotiates HDCP.

Who it’s for: People who want a more robust unit that will last, or who have longer cable runs. It’s also good for those who’ve had bad experiences with cheap switches.

RUIPRO 8K HDMI Switch (2×1)

Strengths: This is one of the few switches that fully supports HDMI 2.1, meaning 4K/120Hz and 8K/60Hz. It also supports eARC, which is essential for passing lossless audio from a TV to a soundbar. It’s built like a tank with a metal enclosure.

Trade-offs: Only 2 inputs. Expensive (usually $80-100). Overkill if you don’t have a next-gen console or 8K TV.

Who it’s for: Gamers with a PS5 or Xbox Series X and a 120Hz TV. Also for home theater enthusiasts who need eARC passthrough.

Amazon Basics 3×1 HDMI Switch

Strengths: It’s cheap (around $15), does 4K/30Hz (fine for non-HDR content), and has a simple button switch. It’s also compact and gets the job done for basic setups.

Trade-offs: No HDR, no 4K/60Hz, no auto-switching. It can cause signal dropouts with some devices. It’s a stopgap, not a long-term solution.

Who it’s for: Very budget-constrained buyers who only need to switch between a cable box and an older game console at 1080p.

How to Choose

Budget: You can get a decent 4K/60Hz HDR switch for $30-50. Below that, you’ll sacrifice HDR or reliability. Above $80, you’re paying for HDMI 2.1 or extra features. Set a budget, but don’t go below $25 if you care about picture quality.

Use case: For a living room TV, prioritize auto-switching and a remote. For a desk setup, a button switch is fine. For a home theater, look for eARC and HDCP 2.2 compliance. For gaming, HDMI 2.1 is a must if you have a 120Hz display.

Common trade-offs: The biggest trade-off is price vs. features. Auto-switching is convenient but can be buggy—if you have a temperamental device, a manual switch is more reliable. Also, more inputs usually mean a larger, uglier box. And remember: a switch only passes through what your TV and source support. If your TV doesn’t do HDR, a switch won’t add it.

Frequently Asked Questions

Do I need an HDMI 2.1 switch?

Only if you have a 4K/120Hz TV and a console that outputs 120Hz (PS5, Xbox Series X). For everything else, HDMI 2.0 is sufficient.

Why does my HDMI switch keep losing signal?

This is usually due to HDCP handshake issues. Try a switch with its own power supply, and use short, high-quality HDMI cables. Also, ensure the switch is HDCP 2.2 compliant.

Can I use an HDMI switch with a soundbar?

Yes, but you need to connect the switch to the TV’s HDMI ARC/eARC port, and then the soundbar to the TV’s eARC port. Some switches have eARC passthrough, which simplifies this.

Will an HDMI switch degrade picture quality?

No, a good switch is transparent. It doesn’t process the signal, just routes it. If you see quality loss, it’s likely a cheap switch or bad cables.

How many HDMI ports do I need?

Count your devices. Add one for future expansion. Most people need 3-5.

What’s the difference between a switch and a splitter?

A switch takes multiple sources and sends one to a single display. A splitter takes one source and sends it to multiple displays. They’re not interchangeable.

Bottom Line

For 90% of people, the Monoprice Blackbird 4K Pro is the best choice—it’s reliable, supports HDR, and won’t break the bank. If you need more ports, get the Kinivo 550BN. If you’re a gamer with a 120Hz TV, spend the extra on the RUIPRO 8K switch. Avoid the ultra-cheap no-name switches; they’ll cause more headaches than they solve. Buy from a reputable brand, check the specs for HDR and HDCP 2.2, and you’ll be set.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →