For most players, the top pick is a combination of DirectX 11 (or 11 Enhanced) with 100% screen scale, textures on Ultra, effects on Low, and an FPS cap of 144 or your monitor’s refresh rate. This gives you the clearest view of enemies (no blurry textures, no distracting effects) while keeping frame times low for smoother aiming. Below is a full guide to every setting that matters, with specific recommendations for different hardware and playstyles.
What to Look For
Four things actually affect your PUBG experience:
- Visibility – Can you spot enemies in grass, shadows, and through smoke? This depends mostly on Screen Scale, Sharpen, Anti-Aliasing, and Post-Processing.
- Performance (FPS) – Higher and more stable FPS reduces input lag and makes tracking targets easier. The key settings are Resolution, Render Scale, Effects, Shadows, and View Distance.
- Aim feel – Input lag and micro-stutters ruin aim. This is affected by V-Sync, Frame Rate Limit, Mouse Smoothing, and Display Mode.
- Personal comfort – Field of View (FOV), crosshair color, and keybinds are subjective. The best settings are ones you can use consistently.
Recommended Settings by Category
1. Display Mode: Fullscreen (Windowed Borderless for multi-tasking)
Strengths: Fullscreen gives the lowest input lag and best performance. Windowed Borderless is nearly as good on modern Windows and lets you alt-tab faster.
Trade-offs: Fullscreen can crash when alt-tabbing; borderless may add 1-3ms of latency.
Best for: Competitive players who want every millisecond; streamers/content creators who switch apps often.
2. Resolution & Screen Scale: Native Resolution + 100% (or 120% if you have GPU headroom)
Strengths: Native resolution (e.g., 1920×1080) matches your monitor’s pixels for sharpest image. Screen Scale (also called Render Scale) at 100% renders at native res; 120% renders higher for a sharper image but costs FPS.
Trade-offs: Lowering resolution (e.g., to 1600×900) improves FPS but makes enemies blurrier and harder to spot at range.
Best for: Everyone should start at 100%. Use 120% only if you have a powerful GPU (RTX 3070+ for 1080p) and already hit your FPS cap.
3. Graphics Preset: Custom (do not use Auto)
Strengths: Auto presets often set everything to Low, which makes the game look bad and can actually hurt visibility (e.g., low textures make grass pop-in).
Trade-offs: Custom requires manual tweaking, but it’s worth it.
Best for: Everyone.
4. Individual Graphics Settings
- Texture: Ultra – High texture quality makes surfaces clearer, which helps spot enemies against walls and rocks. On low VRAM (2GB), set to Medium.
- Anti-Aliasing: Ultra – Smooths edges and reduces shimmering. Low AA makes distant enemies look like pixelated blobs. If FPS is tight, lower to Medium.
- Post-Processing: Low – Adds blur and bloom effects that hide enemies. Low is best for clarity.
- Shadows: Low – Shadows are not important for gameplay and cost FPS. Low makes enemies easier to see in dark areas.
- Effects: Low – Reduces smoke and explosion particle density, which can give you a slight advantage in smoke battles (some players use Low to see through smoke better).
- View Distance: Ultra – Increases the distance at which objects render. Essential for sniping and spotting vehicles/players far away.
- Foliage: Low – Reduces grass density. In a game where prone players hide in grass, Low makes them easier to spot.
- Sharpen: Enabled – Adds a sharpening filter that makes edges more defined. Helps with spotting.
5. Advanced Settings
- DirectX Version: DirectX 11 Enhanced – DX11 Enhanced gives better performance than DX11 on most systems, and DX12 is still buggy for many. If you have a very new GPU, try DX12, but revert if you see stutters.
- Frame Rate Limit: Unlimited (or cap at your monitor’s refresh rate) – If you have a 144Hz monitor, cap at 144 or 160 to avoid screen tearing. If you have a 60Hz monitor, cap at 60 or leave unlimited if you have G-Sync/FreeSync.
- V-Sync: Disabled – V-Sync adds input lag. Use it only if you see severe screen tearing and have no adaptive sync.
- Motion Blur: Disabled – Blurs the screen when moving, making it harder to track enemies.
- FOV: 90-100 – Higher FOV lets you see more around you, but makes distant enemies smaller. Most pros use 90-95.
6. Mouse & Aim Settings
- DPI: 400-800 – Lower DPI is common for precision. The in-game sensitivity should be adjusted to your preference, but a good starting point is 30-50 for all scopes.
- Mouse Smoothing: Disabled – Adds acceleration, making muscle memory impossible.
- Crosshair Color: Green or Red – Choose a color that contrasts with the environment. Green is popular because it’s rare in most maps.
How to Choose
Your choice depends on your hardware and goals:
- Budget/GPU: If you have a GTX 1650 or lower, prioritize FPS: set Textures to Medium, Anti-Aliasing to Medium, and keep everything else Low. If you have an RTX 3060 or better, you can run Ultra textures and AA at 1080p with 100% scale.
- Use case: If you’re a sniper, set View Distance to Ultra. If you play aggressive close-range, lower FOV to 90 for better target acquisition. If you’re a streamer, consider Windowed Borderless to avoid stream delays.
- Trade-offs: High settings look nice but cost FPS. Low settings improve visibility and performance but make the game look dated. There is no perfect setting – you must balance them.
Frequently Asked Questions
1. Should I use DX11 or DX12?
DX11 Enhanced is the most stable and performs best on most systems. DX12 can give better FPS on high-end PCs, but it’s known to cause stutters on some hardware. Try both and keep the one that feels smoother.
2. Does lowering resolution help me see enemies?
No, lowering resolution makes enemies blurrier and harder to spot. It only helps if you’re desperate for FPS. Instead, lower effects and shadows to gain FPS without losing clarity.
3. What is the best FOV?
Most pros use 90-95. Higher FOV (100+) gives more peripheral vision but makes distant enemies smaller. Lower FOV (80) makes enemies bigger but limits your view. Test between 90-100 and pick what feels natural.
4. Does screen scale affect performance a lot?
Yes. 120% screen scale is roughly 44% more pixels to render, which can cut FPS by 20-30%. Only use it if you have a powerful GPU and already have high FPS.
5. Should I cap my FPS?
If you have a 144Hz monitor, cap at 144 or slightly above (160) to reduce tearing. If you have G-Sync/FreeSync, cap at 3 frames below your refresh rate (e.g., 141 for 144Hz). If you have a 60Hz monitor, cap at 60.
6. Why do pros use low shadows?
Low shadows make enemies easier to spot in dark areas and reduce the chance of being blinded by your own shadow. It also boosts FPS.
Bottom Line
Start with the recommended settings above, then tweak based on your FPS and comfort. The most important settings for visibility are Texture: Ultra, Anti-Aliasing: Ultra, Effects: Low, and View Distance: Ultra. For performance, keep Shadows: Low, Post-Processing: Low, and Foliage: Low. For aim, disable V-Sync and mouse smoothing, and use a consistent DPI. Test in the training mode and adjust until the game feels smooth and you can spot enemies easily. Remember, the best settings are the ones that work for you.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- PUK Code Samsung: What It Is & How to Unlock
- Uninstall MATLAB Mac: Full Removal Guide
- Data Center Firewall: How It Works & How to Choose
- Tesla Phone? Here’s the Truth
- Best HDMI Switch: Top Picks & Buying Guide
- Best CPUs for Gaming: Top Picks & Buyer’s Guide