keepcalculator

06 Numbers and Powers

Best DLSS 5 Alternatives for Hogwarts Legacy on AMD & Intel

Card No. 06·80341 · Updated · Standard formula, shown below

For AMD and Intel GPU owners, the top pick to replace DLSS 5 in Hogwarts Legacy is FSR 3.1 with Frame Generation (on AMD) or XeSS 1.3 (on Intel). FSR 3.1 offers the best balance of image quality and performance across all AMD cards, while XeSS 1.3 is nearly as good and works well on both Intel and Nvidia GPUs. Both are natively supported in the game, so you can enable them without any mods or external tools.

What to Look For

When choosing an upscaler for Hogwarts Legacy, focus on these criteria:

  • Image Quality: How sharp and stable the image looks, especially in motion (hair, foliage, and spell effects).
  • Performance Gain: The FPS boost you get, particularly at 1440p and 4K.
  • Frame Generation: Whether the upscaler includes a frame generation feature (like DLSS 3/FSR 3) that can double frame rates, but may introduce input lag.
  • Compatibility: Does it work on your GPU? FSR works on all GPUs, XeSS works on most, and DLSS is Nvidia-only.
  • Ghosting and Artifacts: How well the upscaler handles fast motion and transparent objects (like spells and fire).
  • Ease of Use: Is it built into the game, or do you need to download and configure external software?

AMD FSR 3.1 (with Frame Generation)

Strengths: FSR 3.1 is the most compatible upscaler—it works on AMD, Intel, and even Nvidia GPUs. In Hogwarts Legacy, it provides a solid performance boost (often 50-70% at 4K) and the 3.1 update significantly reduces ghosting compared to earlier versions. The built-in Frame Generation (FSR 3) can double your frame rate, making it the best choice for high-refresh monitors.

Trade-offs: Image quality is slightly softer than DLSS or XeSS at the same quality preset, especially on fine details like castle stonework or distant trees. Frame Generation can cause minor visual artifacts on UI elements and adds a small amount of input lag (less noticeable with a controller).

Who it suits: AMD GPU owners (RX 6000/7000 series) who want the highest frame rates possible, and anyone with a GPU that doesn’t support DLSS or XeSS (e.g., older GTX cards).

Intel XeSS 1.3

Strengths: XeSS 1.3 is a close rival to DLSS in image quality, often producing sharper results than FSR 3.1. It uses AI upscaling (similar to DLSS) and performs well on both Intel Arc and Nvidia RTX GPUs. In Hogwarts Legacy, it delivers a stable 40-60% performance uplift with minimal ghosting.

Trade-offs: Not all GPUs support XeSS—it requires hardware support for DP4a instructions (Intel Arc, Nvidia RTX 20/30/40 series, and AMD RX 6000/7000 series). On older GPUs, it may fall back to a slower path. It does not include frame generation, so you’ll need to pair it with FSR 3 Frame Generation (if you have an AMD card) or use it alone.

Who it suits: Intel Arc owners (A770/A750/A380) and Nvidia RTX users who want the best image quality without Nvidia’s proprietary DLSS (e.g., if you’re on a laptop with an RTX GPU but prefer an open standard).

AMD FSR 2.2 (No Frame Generation)

Strengths: FSR 2.2 is a mature upscaler with good temporal stability and less ghosting than FSR 1.0. It works on virtually any GPU, including older AMD and Nvidia cards. It’s a safe choice if you want a simple performance boost without the extra complexity of frame generation.

Trade-offs: It does not provide the massive frame rate jumps of FSR 3.1 with Frame Generation. Image quality is slightly below FSR 3.1 and XeSS in motion, especially on high-contrast edges.

Who it suits: Users with older GPUs (RX 5000 series, GTX 10/16 series) that don’t support FSR 3 or XeSS, or those who prefer lower input lag over higher frame rates.

Nvidia DLSS 2 (via mod, for Nvidia GPUs only)

Strengths: DLSS 2 (the non-frame-gen version) is widely considered the gold standard for image quality in Hogwarts Legacy. It produces sharp, clean images with minimal ghosting. If you have an Nvidia RTX GPU, you can use DLSS 2 via a mod (like the “DLSS-to-FSR” mod) to replace the game’s FSR implementation. This gives you DLSS quality without needing DLSS 3/5.

Trade-offs: It’s not a native option—you’ll need to download and install a mod, which can be a hassle and may break after game updates. It also lacks frame generation, so you’ll get a moderate FPS boost (30-50%) but not the doubling that DLSS 3/5 offers.

Who it suits: Nvidia RTX 20/30 series owners who want the best image quality and are comfortable with modding. Note: DLSS 5 is not a real product as of this writing; DLSS 3.5 is the latest version with Ray Reconstruction, which is not supported in Hogwarts Legacy.

Native Resolution with TAA (No Upscaling)

Strengths: Running at native resolution with TAA (Temporal Anti-Aliasing) gives you the most accurate image quality—no upscaling artifacts, no ghosting, and no shimmer. This is the best choice for those with powerful GPUs (RX 7900 XTX, RTX 4080) who can maintain 60 FPS at 4K without any upscaling.

Trade-offs: Performance is the worst of all options. You’ll need to lower other settings (like ray tracing) to maintain playable frame rates. TAA can also cause slight blurriness on some textures.

Who it suits: Gamers with high-end GPUs who prioritize image fidelity over frame rate, or those sensitive to upscaling artifacts.

How to Choose

Budget and GPU: Your GPU dictates your options. If you have an AMD RX 6000/7000 series, FSR 3.1 is the obvious choice—it’s native, free, and offers the best performance. If you have an Intel Arc GPU, XeSS 1.3 is the best match, as it’s designed for your hardware. For Nvidia RTX users, you can use DLSS 2 (via mod) or XeSS 1.3, but DLSS 2 is the better quality option.

Use Case: If you have a 144Hz monitor and want to hit high frame rates, use FSR 3.1 with Frame Generation (on AMD) or pair XeSS with FSR 3 Frame Generation (on Intel). If you’re playing on a 60Hz display, you can use any upscaler at Quality preset to get a stable 60 FPS with minimal visual compromise.

Common Trade-offs: Frame Generation is great for smoothness but adds input lag—avoid it for competitive multiplayer (though Hogwarts Legacy is single-player, so it’s fine). Image quality: DLSS 2 > XeSS 1.3 > FSR 3.1 > FSR 2.2. Performance: FSR 3.1 with FG > FSR 3.1 without FG > XeSS > DLSS 2 > FSR 2.2.

Frequently Asked Questions

Q: Does Hogwarts Legacy support DLSS 5?
A: No, DLSS 5 does not exist. The game supports DLSS 2 and DLSS 3 (Frame Generation) on Nvidia GPUs. AMD and Intel users should use FSR 3.1 or XeSS 1.3.

Q: Can I use FSR 3.1 on an Nvidia GPU?
A: Yes, FSR 3.1 works on any GPU, including Nvidia RTX cards. It’s a good alternative if you don’t want to use DLSS or want frame generation on an older RTX card.

Q: Which upscaler gives the best image quality?
A: DLSS 2 (via mod) is the best, followed closely by XeSS 1.3. FSR 3.1 is slightly softer but still good.

Q: Does frame generation cause input lag?
A: Yes, frame generation increases input lag by a small amount (around 15-30ms). In a single-player game like Hogwarts Legacy, it’s generally not noticeable, but some players may feel it.

Q: My GPU doesn’t support FSR 3 or XeSS. What should I use?
A: Use FSR 2.2, which works on almost any GPU from the last decade. It still provides a good performance boost with acceptable image quality.

Q: Do I need to mod the game to use DLSS on an AMD or Intel GPU?
A: No, DLSS is Nvidia-only and cannot be enabled on AMD or Intel GPUs. Use FSR 3.1 or XeSS instead.

Bottom Line

For most AMD and Intel users, FSR 3.1 with Frame Generation is the best all-around choice for Hogwarts Legacy—it’s native, easy to use, and delivers the highest frame rates. If you have an Intel Arc GPU, XeSS 1.3 offers superior image quality and is also native. For Nvidia RTX users who want the absolute best image quality, DLSS 2 via mod is worth the effort. Whatever you choose, enable the Quality preset first and adjust from there to balance visuals and performance.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →