keepcalculator

06 Numbers and Powers

Disk Drill Mac: What It Does and How to Use It

Card No. 06·77012 · Updated · Standard formula, shown below

Disk Drill for Mac is a data recovery utility that can undelete files from internal and external drives, memory cards, and other storage devices. You download it, scan the drive where your files were lost, and then preview and recover what it finds. This article explains how the software works, what it costs, and how to get the best results.

What Disk Drill for Mac Actually Does

Disk Drill is a file recovery program developed by CleverFiles, available for both macOS and Windows. On a Mac, it scans storage devices—including the built-in SSD, external USB drives, SD cards, and even some cameras—for data that can be recovered. It supports common file systems like APFS, HFS+, FAT32, exFAT, and NTFS (the last one for reading Windows-formatted drives).

The software has two main scanning modes. The first is a quick scan that looks at the file system’s directory and finds recently deleted files that are still marked as recoverable. The second is a deep scan that searches the raw data on the drive for file signatures, which can recover files even after the directory entry is gone. Deep scans take much longer but find more.

Beyond recovery, Disk Drill includes a few maintenance tools. The most useful is the “Recovery Vault,” which backs up file metadata when you delete something, making future recovery faster and more reliable. It also has a disk health monitor that checks SMART status, a duplicate finder, and a backup tool that creates byte-for-byte disk images.

How Disk Drill Works: Quick vs. Deep Scan

When you delete a file on a Mac, the space it occupies isn’t erased immediately. Instead, the file system marks that space as available for new data. Until something else writes over it, the original file data is still physically on the drive. Disk Drill takes advantage of this.

The quick scan reads the file system’s metadata to find entries that point to deleted files. If the metadata is intact, the file can often be restored instantly. However, if the metadata has been overwritten or the file was deleted a long time ago, the quick scan won’t find it.

The deep scan, on the other hand, ignores the file system structure and reads every block of the drive, looking for patterns that match known file types—like JPEG images, PDF documents, or MP4 videos. It then reassembles the files from these fragments. This is why a deep scan can recover files even from a formatted drive, but it’s also why it can take hours on a large disk.

For best results, you should stop using the drive as soon as you realize you need to recover files. Every new file you save, every app you open, and even some background processes can overwrite the very data you’re trying to recover.

How to Use Disk Drill on a Mac

Using Disk Drill is straightforward, but the exact steps depend on whether you’re recovering from your main startup disk or an external drive.

  1. Download Disk Drill from the official CleverFiles website and install it. You’ll need to drag it to your Applications folder.
  2. Open Disk Drill. You’ll see a list of all connected drives, including your internal SSD and any external devices.
  3. Select the drive where your files were lost. If you’re recovering from your startup disk, you can still scan it, but it’s better to recover to a different drive.
  4. Click “Search for lost data.” Disk Drill will start a quick scan first. You can let it finish or jump to a deep scan from the same screen.
  5. After the scan, browse the results. You can filter by file type or search for a specific filename. Preview files to confirm they’re the right ones.
  6. Select the files you want and click “Recover.” Choose a destination folder on a different drive, then wait for the process to finish.

If you’re recovering from an external drive, connect it directly to your Mac with a USB or Thunderbolt cable. Avoid using a hub, as power interruptions can cause further issues.

Cost and Free Version Limitations

Disk Drill is not free. The free version lets you scan drives and preview recoverable files, but it does not allow you to actually save them. To recover files, you need a Pro license, which is a one-time purchase that covers up to three Macs. The price varies depending on promotions, but it’s typically around $89 for a single license.

There is also a “Disk Drill Enterprise” version for businesses, which includes centralized management and priority support. For most home users, the standard Pro version is sufficient.

It’s worth noting that the free preview feature is genuinely useful. You can see exactly which files are recoverable before you pay, which helps you decide if the software is worth it for your situation.

Common Problems and How to Fix Them

Even with good software, recovery doesn’t always go smoothly. Here are the most common issues Mac users run into.

  • Recovered files won’t open. This usually happens when the file was partially overwritten. The deep scan may find fragments, but the file is corrupt. Try recovering an earlier version or using a different recovery tool.
  • Scan takes too long. A deep scan of a 1TB drive can take several hours. You can pause it and resume later, but you can’t use the drive while the scan is running. Consider scanning a disk image instead.
  • Drive not showing up. If your external drive isn’t listed, check that it’s properly connected and that the Mac can see it in Disk Utility. If the drive is failing, you may need to use Disk Drill’s “Create byte-to-byte backup” feature first.
  • Files recovered but with wrong names. Deep scans often recover files without their original names, especially if the file system structure was damaged. You’ll need to rename them manually.
  • Recovery fails on a failing drive. If the drive is making clicking sounds or is not recognized, stop using it immediately. Professional data recovery services may be your only option.

Is Disk Drill Safe to Use?

Disk Drill is generally safe, but you should be aware of a few things. The software is signed by Apple, so it will run without disabling Gatekeeper. It doesn’t contain malware, and it won’t modify your files unless you explicitly choose to recover them.

However, the recovery process itself can be risky if you do it wrong. The biggest mistake is recovering files to the same drive you’re scanning. This can overwrite the very data you’re trying to save. Always recover to a different drive.

Also, Disk Drill’s “Recovery Vault” feature, which is enabled by default, uses some disk space to store metadata for deleted files. If you’re low on storage, you might want to disable it. You can turn it off in the app’s preferences.

Alternatives to Disk Drill for Mac

Disk Drill is not the only option. Several other data recovery tools work on macOS, each with its own strengths.

  • Data Rescue (by Prosoft) is a long-standing Mac recovery tool with a similar feature set. It offers a free trial that can recover a limited amount of data.
  • PhotoRec is a free, open-source tool that does deep file-signature scanning. It’s command-line based and less user-friendly, but it’s very powerful and costs nothing.
  • EaseUS Data Recovery Wizard is a cross-platform tool that also offers a free version with a recovery limit (usually 2GB).
  • Stellar Data Recovery is another commercial option with a free trial.

For most users, Disk Drill’s interface is the easiest to navigate, and its preview feature is a big plus. But if you’re on a tight budget, PhotoRec is worth trying first.

Frequently Asked Questions

Can Disk Drill recover files from a formatted Mac hard drive?
Yes, but only if you haven’t written new data to the drive after formatting. A deep scan can find files by their signatures, but if the drive has been used heavily since formatting, recovery chances drop significantly.

Does Disk Drill work on Apple Silicon (M1/M2/M3) Macs?
Yes, Disk Drill is a universal app that runs natively on both Intel and Apple Silicon Macs. It supports macOS 10.13 High Sierra and later, including the latest versions.

How long does a Disk Drill scan take?
A quick scan typically takes 5–15 minutes for a 1TB drive, depending on the number of files. A deep scan can take several hours to a full day, depending on the drive size and speed.

Can I recover files from a Time Machine backup with Disk Drill?
Disk Drill can scan the Time Machine backup drive, but it’s usually easier to use Time Machine’s own “Enter Time Machine” feature to browse and restore files. Disk Drill is more useful if the backup drive itself is damaged.

Is there a free way to recover files on Mac?
Yes, you can try the free tools like PhotoRec, or use the built-in “Recently Deleted” folder in apps like Photos and Mail. For system files, you can use Terminal commands like fsck, but these are advanced and not always effective.

Will Disk Drill recover files after I empty the Trash?
Yes, emptying the Trash does not immediately erase the file data. Disk Drill can often recover files from the Trash, as long as the space hasn’t been overwritten. The sooner you run a scan, the better.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →