Yes, you can enable AirDrop over Ethernet and on older, officially unsupported Macs, but it requires editing system files and comes with real risks. This guide explains the background, the exact steps for both scenarios, common problems, and safer alternatives.
Why AirDrop Normally Requires Wi-Fi and Bluetooth
Apple designed AirDrop to use Bluetooth Low Energy (BLE) for peer discovery and Wi-Fi for the actual file transfer. BLE lets nearby Macs and iOS devices find each other without joining the same network, and Wi-Fi provides the high-speed link for sending files. On Macs, AirDrop is tied to the Wi-Fi interface in the system’s networking stack, and the system checks for compatible hardware and software before enabling the feature.
This design means that if your Mac has no Wi-Fi (e.g., a Mac Pro or a Hackintosh with only Ethernet), or if your Wi-Fi card is too old to support the required features, macOS will not show AirDrop as available. Additionally, Apple has dropped support for certain Mac models in newer macOS versions, and those older machines may not have the necessary hardware capabilities (like the right Wi-Fi chipset) even if the OS runs.
How AirDrop Over Ethernet Works (and Its Limits)
AirDrop over Ethernet is not a hidden toggle; it’s a side effect of how macOS discovers peers. When you enable AirDrop over Ethernet, the system uses the Ethernet interface for the data transfer, but it still needs a way to discover other devices. On a pure Ethernet network (no Wi-Fi at all), discovery can fail because macOS expects BLE or AWDL (Apple Wireless Direct Link) to find peers. However, if you have both Wi-Fi and Ethernet, or if you use a workaround that forces the Ethernet interface into the AWDL process, transfers can work.
In practice, the most reliable method is to use a terminal command that adds the Ethernet interface to the system’s list of AirDrop-capable interfaces. This is not officially supported, and Apple may change the underlying mechanism in any macOS update. Also, both Macs must be on the same subnet, and firewalls or network segmentation can block the discovery packets.
Enabling AirDrop on Unsupported Macs (Step-by-Step)
For older Macs that are not officially supported (e.g., a 2009 Mac Pro running a patched macOS), the common workaround is to edit a system file called com.apple.NetworkBrowser.plist. This file contains a list of supported AirDrop interfaces. By adding the Ethernet interface, you tell macOS to use it for AirDrop.
- Open Terminal.
- Back up the file:
sudo cp /System/Library/PrivateFrameworks/NetFS.framework/Versions/A/Resources/com.apple.NetworkBrowser.plist ~/Desktop/com.apple.NetworkBrowser.plist.bak - Edit the file with a plist editor (e.g., Xcode or PlistEdit Pro) or via command line. You need to add a line that includes
en0(or your Ethernet interface name) to theAirDroparray. - Save the file, then reboot your Mac.
- After reboot, open Finder → Go → AirDrop. If the interface was added correctly, you should see AirDrop as available.
Note: The exact steps can vary by macOS version, and the file path may change in newer releases. Always back up before editing. If you are not comfortable with command-line editing, consider using a third-party tool that automates this process, but be aware that such tools may not be updated for the latest macOS.
Enabling AirDrop Over Ethernet on Supported Macs
If your Mac is officially supported but you want to use Ethernet instead of Wi-Fi (e.g., for speed or because Wi-Fi is broken), the same plist edit works, but you must also ensure that your Wi-Fi is turned on (even if not connected) because AirDrop still uses the Wi-Fi interface for discovery in many cases. Here is a more targeted approach:
- Make sure both Macs are on the same Ethernet network (same subnet).
- On each Mac, open Terminal and run:
sudo ifconfig awdl0 up– this ensures the AWDL interface is active. - Then edit the plist as described above, adding
en0(Ethernet) to the AirDrop supported interfaces. - Reboot, then try AirDrop.
If it still doesn’t work, you may need to disable the firewall or add an exception for AirDrop in System Settings → Network → Firewall.
Common Problems and How to Fix Them
- AirDrop shows “No one around” – This usually means discovery is failing. Check that both Macs have Bluetooth and Wi-Fi on (even if using Ethernet), and that they are within 30 feet of each other.
- Transfer starts but fails midway – This can be due to network congestion or firewall interference. Try turning off the firewall temporarily to test.
- After editing the plist, AirDrop still not available – The plist may have been overwritten by a system update, or the interface name is wrong. Check your interface name with
networksetup -listallhardwareports. - macOS update resets the change – Every macOS update will likely revert the plist. You will need to reapply the edit after each update.
Risks and Safety Considerations
Editing system files carries risks. A typo can cause network services to fail, and in worst cases, you may need to reinstall macOS. Always back up the original file, and be prepared to restore it. Also, using unsupported methods means you won’t get official support from Apple if something goes wrong. Additionally, AirDrop over Ethernet is not encrypted differently than normal AirDrop, but it uses the same end-to-end encryption, so security is not reduced. However, enabling AirDrop on an unsupported Mac may expose it to vulnerabilities that Apple has not patched for that model, so be cautious about what you share.
Alternatives to AirDrop for Unsupported Macs
If the plist edit fails or you prefer a safer route, consider these alternatives:
- Local network file sharing – Use Finder’s “Connect to Server” (Cmd+K) to connect via SMB or AFP. This works over Ethernet and is fully supported.
- Cloud storage – Dropbox, Google Drive, or iCloud Drive can transfer files between any devices with internet.
- Email or messaging apps – For small files, this is simple but not ideal for large ones.
- USB drive or external storage – The most reliable for large files, especially if you have no network.
Frequently Asked Questions
Is it safe to edit the plist file?
It is safe if you follow the steps carefully and back up the file. However, any mistake can cause network issues, and you should be prepared to restore the backup. The risk is low for experienced users, but novices should consider alternatives.
Will this work on a Hackintosh?
It can work, but Hackintosh systems often have different network interface names (e.g., en0 might be Wi-Fi). You need to identify the correct Ethernet interface name and add that to the plist. The process is the same, but you may need to experiment.
Why does AirDrop still not work after the edit?
Possible reasons: the plist path is different on your macOS version, the interface name is wrong, or the system caches the old settings. Try rebooting twice, or use the terminal command killall Finder after saving the plist.
Can I use AirDrop over Ethernet on iOS devices?
No, iOS devices do not have a plist you can edit, and AirDrop on iOS is strictly Wi-Fi/Bluetooth. This workaround is only for Mac-to-Mac transfers.
Will this void my warranty?
Editing system files does not void your Apple warranty, but if you cause a software issue, Apple may charge for repairs. It is not a hardware modification, so it’s generally safe.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Car Trends Making Cars Worse: 7 Downsides
- Nostalgic Classic Games Revamped on G2A?
- Nvidia RTX 4000 Super GPUs: Full Specs & Buying Guide
- Photoshop vs Lightroom AI Features Compared
- DNF vs DNF5: Which Package Manager?
- Korean SUV Making BMW and Audi Owners Question Their Choices?