Removing the legs from a Samsung QLED TV is something you’ll need to do when wall‑mounting the TV, moving it to a different stand, or packing it for transport. The process is straightforward, but a large TV is heavy and fragile, so the key is to work on a soft, flat surface and keep the screen protected. This guide walks you through the safe removal of the legs on current Samsung QLED models, including what tools you need and what to watch out for.
What You’ll Need
- Soft, clean surface (blanket, rug, or foam mat) large enough for the TV
- Phillips-head screwdriver (usually #2, but check the screw heads)
- Optional: electric screwdriver with a low torque setting (be careful not to strip screws)
- Optional: a second person to help lift and hold the TV
Step-by-Step
- Clear the area and prepare the surface. Lay a soft blanket or mat on a flat, stable surface (a carpeted floor is ideal). Make sure there are no sharp objects or debris on it.
- Power off and unplug the TV. Disconnect all cables (HDMI, power, etc.) from the TV to avoid pulling them during the process.
- Get a helper if the TV is large. For 55-inch and larger models, two people are strongly recommended to avoid injury and damage.
- Lay the TV face down on the soft surface. Hold the TV by the edges (not the screen) and gently lower it, screen side down. Ensure the legs are hanging off the edge of the surface slightly so they are accessible, but the TV body is fully supported. For legs that are near the corners, position the TV so the legs are just past the edge of the blanket.
- Locate the screws on each leg. Look at the base of each leg where it meets the TV. There are typically 2–4 screws per leg. They are usually Phillips-head screws.
- Remove the screws with a screwdriver. Turn counterclockwise to loosen. Keep the screws in a safe place (a small bag or container) because you’ll need them if you ever reattach the legs.
- Lift the leg straight off the TV. After all screws are removed, gently pull the leg away from the TV. It should come off without force. If it resists, double-check that you removed all screws (some legs have hidden screws under a small cover).
- Repeat for the other leg. Follow the same steps on the opposite side.
- Store the legs and screws together. Keep them in a labeled bag or box so you don’t lose them. If you are wall-mounting, you can now proceed with the mount installation.
Common Mistakes
- Not supporting the TV properly. Placing the TV face down on a hard floor without padding can scratch the screen or the back panel.
- Forgetting to unplug cables. Pulling the TV while cables are still attached can damage the ports.
- Using the wrong screwdriver size. A screwdriver that is too small can strip the screw head, making it impossible to remove.
- Lifting the TV by the legs. Never carry the TV by its legs – they are not designed to bear the full weight of the TV.
- Removing screws while the TV is standing upright. The TV could tip over when the last screw is removed.
Tips
- Take a photo of the leg and screw positions before removing them – this helps when you reattach them later.
- If the screws are very tight, press down firmly on the screwdriver while turning to avoid stripping.
- Use a magnetic screw tray or a small dish to keep screws from rolling away.
- When lifting the TV, hold it by the bottom edge and the top edge – never by the screen.
- If you are wall-mounting, check the VESA pattern on the back of the TV before buying a mount.
Troubleshooting
Screw won’t turn. If a screw is stuck, do not force it. Try a screwdriver with a wider tip for better grip. If it still won’t budge, apply a tiny drop of penetrating oil (like WD-40) to the screw head and wait a few minutes before trying again. If the screw is stripped, you may need a screw extractor kit – but this is rare.
Leg won’t come off after removing screws. Check for a small locking tab or a cover that might be hiding an extra screw. Some models have a small plastic clip that you need to press or slide to release the leg. Look for a notch or a small hole near the base.
You dropped a screw behind the TV. Use a telescoping magnet or a flexible pick-up tool to retrieve it. If it’s unreachable, you can use a replacement screw of the same size and thread – but it’s safer to contact Samsung support for the exact part.
TV screen got scratched. If the screen is scratched, unfortunately there is no easy fix. This is why it’s essential to use a soft surface and handle the TV carefully. For minor smudges, use a microfiber cloth.
Frequently Asked Questions
Do I need to remove the legs to wall-mount my Samsung QLED TV?
Yes, in most cases. Wall mounts attach to the VESA holes on the back of the TV, and the legs would obstruct the mount. Some mounts are designed to work with legs, but it’s rare and not recommended for safety.
Will removing the legs void my warranty?
No, removing the legs does not void the warranty, as long as you do not damage the TV in the process. It is a normal part of installation.
Can I use the same screws to reattach the legs later?
Yes, as long as you keep the screws and they are not stripped. It’s best to store them with the legs.
What if my TV has a different type of leg (e.g., a single central stand)?
The process is similar – you’ll find screws at the base of the stand. Some central stands may have a larger cover plate that needs to be removed first.
Is it safe to lay the TV screen down on a blanket?
Yes, if the blanket is clean and free of debris. A soft, non-abrasive surface like a microfiber blanket or foam mat is ideal. Avoid using towels with rough textures.
How do I know which screwdriver size to use?
Most Samsung TVs use a #2 Phillips screwdriver. Check the screw head – if the cross shape is small, try a #1. Using the wrong size can strip the screw.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Unbox ASMR Codes: What They Are & How to Use5.00 min/km
- Repurposed Old Motorola Phone for Homelab?
- How to Evaluate AI Vendors for Data Security, Privacy & Compliance
- Best Ergonomic Mouse: Top Picks & Buying Guide
- Captions in Google Slides: How to Add & Format Them
- Use Mac Type in Japanese? Full Guide