If your HTC 10 is having call problems—no sound, dropped calls, or the other person can’t hear you—the fixes usually range from simple software resets to cleaning the microphone and speaker grilles. This article covers the most common call-related issues on the HTC 10 and walks you through practical, step-by-step solutions you can try at home before seeking a repair.
Background: The HTC 10’s Call Hardware
The HTC 10, released in 2016, was a flagship phone known for its metal unibody design and BoomSound audio. For calls, it relies on a few key components:
- Earpiece speaker – the small speaker at the top front for listening to the other person.
- Primary microphone – located at the bottom edge, picks up your voice.
- Secondary microphone – near the top, used for noise cancellation.
- Magnetometer and proximity sensor – turn the screen off during calls to prevent accidental touches.
Because these parts are small and exposed, they can get blocked by dust, damaged by drops, or fail due to software glitches. Understanding which component is at fault helps narrow down the fix.
Common Call Problems and Their Likely Causes
Here are the most frequently reported call issues on the HTC 10, along with what typically causes them:
- No sound from earpiece during calls – often caused by a clogged earpiece grille, a software audio routing bug, or a faulty earpiece speaker.
- Other person can’t hear you – usually a blocked primary microphone (dust, pocket lint) or a damaged mic component.
- Dropped calls – more likely network-related, but can also stem from the phone’s antenna connections or SIM card issues.
- Echo or static – often due to the secondary noise-cancellation mic being blocked or the phone case covering it.
- Call timer keeps running or screen stays black – a faulty proximity sensor or a software glitch.
Step-by-Step Fixes to Try First
Before considering hardware repair, work through these steps in order. They resolve a large percentage of call issues.
- Restart the phone – This clears temporary software glitches that can affect audio routing or the cellular radio. Press and hold the power button, then tap Restart.
- Check the volume during a call – While in a call, press the volume up button. Sometimes the call volume is accidentally set to zero or muted.
- Turn off Wi-Fi calling – If you have Wi-Fi calling enabled, it can cause call audio issues on some networks. Go to Settings > Network & Internet > Mobile network > Wi-Fi calling and toggle it off.
- Update the phone’s software – Go to Settings > About > Software updates to check for any system updates. Updates often fix known call bugs.
- Clean the microphone and earpiece grilles – Use a soft, dry brush (like a clean toothbrush) or a can of compressed air to gently remove dust and lint from the small holes at the top and bottom of the phone. Do not use liquids or sharp objects.
- Remove the SIM card and reinsert it – A misaligned SIM can cause intermittent network issues. Eject the tray, clean the SIM contacts gently with a dry cloth, and reinsert it firmly.
- Test in safe mode – Boot into safe mode (press and hold the power button, then long-press the Power off option) to see if a third-party app is interfering. If calls work fine in safe mode, uninstall recently installed apps that might be causing the problem.
When to Try a Factory Reset
If the above steps don’t help, a factory reset can eliminate deeper software corruption. This will erase all data on the phone, so back up your photos, contacts, and files first. To perform a factory reset:
- Go to Settings > System > Reset > Factory data reset.
- Confirm the reset and wait for the phone to reboot.
- Set up the phone as new (or restore from backup) and test a call immediately.
If the problem persists after a factory reset, it’s almost certainly a hardware issue.
Hardware Repairs and Costs
If software resets don’t fix the problem, the culprit is likely a physical component. Common repairs include:
- Replacing the earpiece speaker – If you hear no sound at all from the earpiece but the speakerphone works, the earpiece may be faulty.
- Replacing the microphone board – The bottom mic is often on a small flex cable that can be replaced.
- Cleaning or replacing the charging port/mic assembly – Dirt in the charging port can also affect the mic.
- Proximity sensor replacement – If the screen stays black during calls, the sensor may need replacing.
Repair costs vary by region and service provider, but for an older phone like the HTC 10, it’s often more economical to consider a replacement phone if the repair quote is high. Always get a quote from a reputable repair shop before committing.
Comparing with Other HTC Models
The HTC 10 shares many call issues with its predecessors like the HTC One M9 and the later U11. However, the HTC 10 was one of the first to use a USB-C port, and the bottom microphone is very close to that port. This means that debris in the charging port can easily block the mic opening. In contrast, the U11 moved the mic slightly, but still had some noise-cancellation issues. If you’re considering a repair, note that parts for the HTC 10 are less common now, so availability may be limited.
Frequently Asked Questions
Why can’t the other person hear me on my HTC 10?
This is usually caused by a blocked bottom microphone. Try cleaning the small hole at the bottom edge with a dry brush or compressed air. If that doesn’t work, check if the phone case is covering the mic. If the problem persists, the mic hardware may be faulty and need replacement.
Why is my HTC 10 call volume too low?
First, press the volume up button during a call to ensure the volume is maxed out. If it’s still low, the earpiece speaker grille may be clogged with dust. Clean it gently with a soft brush. If that doesn’t help, the earpiece speaker itself may be damaged.
Why do my calls keep dropping on HTC 10?
Dropped calls are often network-related, not a phone defect. Try removing and reinserting your SIM card, toggling airplane mode on and off, or updating your carrier’s APN settings. If the problem happens everywhere, it could be a hardware antenna issue, which requires professional repair.
Does a factory reset fix call problems on HTC 10?
Yes, if the issue is caused by a software glitch or a conflicting app, a factory reset will likely fix it. However, if the problem is hardware-related, a reset won’t help. Always back up your data before doing a reset.
Can I use speakerphone if the earpiece is broken?
Yes, speakerphone uses the main bottom speaker and the top microphone, which are separate from the earpiece. If the earpiece is broken, you can still make calls using speakerphone until you get it repaired.
Is it worth repairing an HTC 10 in 2025?
Given the phone’s age, repair costs can be high relative to the phone’s value. If the repair is simple like cleaning or replacing a microphone, it might be worth it. But if it’s a major motherboard issue, it’s often more practical to invest in a newer, more reliable phone.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Car Trends Making Cars Worse: 7 Downsides
- Nostalgic Classic Games Revamped on G2A?
- Nvidia RTX 4000 Super GPUs: Full Specs & Buying Guide
- Photoshop vs Lightroom AI Features Compared
- DNF vs DNF5: Which Package Manager?
- Korean SUV Making BMW and Audi Owners Question Their Choices?