OpenVZ and KVM are two very different ways to slice a physical server into virtual private servers (VPS). The short answer: choose KVM if you need full control, custom kernels, or any non-Linux OS, and choose OpenVZ only if you are on a very tight budget and your workload is a simple, compatible Linux application. This article explains how each technology works, what the differences mean in practice, and how to pick the right one for your project.
Background: Where These Two Come From
Virtualization has been around since the 1960s, but the modern VPS market took shape in the early 2000s. Two approaches emerged: OS-level virtualization (where one operating system kernel hosts many isolated user spaces) and full virtualization (where each guest runs its own complete OS on emulated hardware).
OpenVZ is an OS-level virtualization project that started in 2005, originally developed by SWsoft (later Parallels, then Virtuozzo). It is now open source and forms the basis of Virtuozzo’s commercial product. KVM (Kernel-based Virtual Machine) was merged into the Linux kernel in 2007, turning Linux itself into a hypervisor. It is a full virtualization solution that uses hardware virtualization extensions (Intel VT-x, AMD-V).
Both are widely used by hosting providers, but they serve different niches. Understanding the underlying technology explains almost every practical difference you will encounter.
How OpenVZ Works
OpenVZ does not emulate hardware. Instead, it runs a single Linux kernel on the host, and each VPS (called a Container or CT) shares that kernel. The host kernel provides isolation through namespaces and cgroups, which limit CPU, memory, disk I/O, and network access per container.
Because all containers share the host kernel, they must use the same kernel version and architecture. You cannot run a different Linux distribution that requires a different kernel module, and you absolutely cannot run Windows, BSD, or any other non-Linux OS. You also cannot load custom kernel modules (like a specialized firewall or filesystem driver) unless the host has them enabled.
OpenVZ containers are lightweight. They boot in seconds, use very little RAM for the OS overhead, and can achieve near-native performance because there is no hardware emulation layer. This efficiency is why OpenVZ VPS plans are often cheaper and can pack more containers onto a single server.
How KVM Works
KVM turns the Linux kernel into a type-1 hypervisor. Each VPS (called a guest or VM) gets its own virtual CPU, memory, disk, and network interfaces, all emulated in software (QEMU) or paravirtualized (virtio). The guest OS runs completely isolated from the host kernel and from other guests.
This means each KVM guest can run any operating system that supports the emulated hardware: any Linux distribution, Windows, FreeBSD, macOS (with caveats), etc. You can use your own kernel, load any kernel module, and customize boot parameters. You also get full root access to the virtual hardware, which is essential for some workloads.
The cost is performance overhead. Emulating hardware and running a full OS per guest consumes more CPU and RAM. A KVM VPS also boots slower (usually 30-60 seconds) and uses more RAM for the guest OS itself (typically 128-512 MB just for the OS, depending on the distribution).
Key Differences in Practice
Here are the practical differences that matter when you are choosing a VPS:
- Operating System: KVM supports any OS; OpenVZ only supports Linux (and only the host kernel version).
- Kernel Control: KVM lets you use your own kernel and modules; OpenVZ forces the host kernel on you.
- Performance: OpenVZ has near-zero overhead; KVM has a small but measurable overhead (typically 5-10% for CPU-heavy tasks).
- Memory: OpenVZ can overcommit memory (sell more RAM than physically available) because containers share the host’s memory; KVM cannot overcommit as easily, so you get the exact RAM you pay for.
- Isolation: KVM provides stronger isolation because each guest is a separate OS; a kernel panic in one KVM guest does not affect others. In OpenVZ, a host kernel crash takes down all containers.
- Swap: OpenVZ often uses a single swap file on the host, which can be a bottleneck; KVM gives each guest its own swap partition or file.
- Backups: KVM snapshots are files that can be copied and restored anywhere; OpenVZ backups are container images that must be restored on a compatible host.
How to Choose: A Decision Guide
Use this flow to decide which one fits your needs:
- Do you need to run Windows or any non-Linux OS? → Choose KVM. OpenVZ cannot do this at all.
- Do you need a custom kernel or specific kernel modules? (e.g., for a VPN, a specialized network stack, or a filesystem like ZFS) → Choose KVM. OpenVZ will block you.
- Do you need guaranteed, dedicated RAM? → Choose KVM. OpenVZ may oversell, so your neighbors can affect your performance.
- Is your application a simple, well-supported Linux stack (e.g., LAMP, Node.js, Python)? → OpenVZ is fine and cheaper.
- Do you need Docker or other container technologies? → KVM is safer. Docker inside OpenVZ can work, but it often requires nested virtualization (which may not be enabled) or special flags.
- Are you on a tight budget and only need a small test server? → OpenVZ is acceptable for development, but be aware of the limitations.
In general, for production workloads, KVM is the safer choice. The performance overhead is small, and the flexibility and isolation are worth the extra cost for most users.
Common Problems and Misconceptions
Misconception: OpenVZ is always faster. While OpenVZ has lower overhead, if the host is oversold (too many containers sharing the same CPU/RAM), your performance can be terrible. KVM hosts are less likely to be oversold because each guest requires more resources.
Misconception: KVM is always slower. With modern hardware virtualization and paravirtualized drivers (virtio), the performance difference is often negligible for typical web workloads. The main difference is RAM usage, not speed.
Problem: OpenVZ and swap. Many OpenVZ hosts do not give you a dedicated swap file. Instead, they use a host-level swap, which can cause all containers to slow down when one container uses too much memory. Always check if your OpenVZ plan includes a guaranteed swap.
Problem: KVM requires more RAM. A minimal KVM guest (e.g., Ubuntu Server) needs at least 256-512 MB of RAM just to boot comfortably. If you only have 256 MB total, OpenVZ might be the only option, but you will be limited to very lightweight Linux distributions.
Performance Comparison: What the Numbers Say
Benchmarks vary, but in general:
- CPU: OpenVZ is essentially native; KVM loses about 5-10% on CPU-intensive tasks due to virtualization overhead.
- Memory: OpenVZ uses less RAM because there is no separate OS; KVM uses more RAM for the guest kernel and processes.
- Disk I/O: Both can be fast, but KVM with virtio drivers is often faster than OpenVZ with a shared filesystem, especially under heavy load.
- Network: Both are usually fine, but KVM with virtio-net can achieve near-native throughput.
For a typical web server (Apache/Nginx, PHP, MySQL), the difference is negligible. For high-performance computing or database workloads, KVM is often preferred because you get dedicated resources.
Cost and Provider Considerations
OpenVZ plans are usually 20-40% cheaper than equivalent KVM plans because providers can fit more containers on a single server. However, cheap OpenVZ plans often come with overselling, which can lead to unpredictable performance. KVM plans are more expensive but offer guaranteed resources.
When comparing providers, look for:
- Guaranteed RAM vs. burstable RAM: OpenVZ often advertises “burst” RAM, which is temporary and not guaranteed.
- CPU allocation: Check if the CPU is dedicated or shared, and how many cores you get.
- Disk type: SSD vs. HDD makes a huge difference for I/O.
- Backup policy: Does the provider offer automatic backups? For KVM, you can often take snapshots yourself.
- Support for custom kernels: If you need a specific kernel, KVM is the only option.
Frequently Asked Questions
Can I run Docker on OpenVZ?
Yes, but with caveats. Docker requires specific kernel features (like cgroups and namespaces) that OpenVZ supports, but you may need to enable nested virtualization or use a special Docker storage driver. Some OpenVZ hosts block Docker entirely. KVM gives you full control, so Docker works without issues.
Is KVM more secure than OpenVZ?
Generally, yes. KVM provides hardware-level isolation between guests, so a vulnerability in one guest’s kernel cannot directly affect another guest. In OpenVZ, all containers share the host kernel, so a kernel exploit could potentially compromise all containers. However, OpenVZ has security mechanisms, and many providers patch quickly.
Can I switch from OpenVZ to KVM later?
Yes, but it is not a seamless migration. You would need to create a new KVM VPS and transfer your data, reinstall your applications, and update your configuration. It is easier to choose KVM from the start if you think you might need it.
Why is OpenVZ cheaper?
Because OpenVZ containers use fewer resources (no separate OS, less RAM overhead), a single physical server can host more VPS instances. Providers pass those savings on to you. However, if the host is oversold, you may get less performance than you expect.
Does OpenVZ support IPv6?
Yes, OpenVZ supports IPv6, but the host must have IPv6 enabled and configured. Some providers may not offer IPv6 on OpenVZ plans, so check before you buy. KVM generally supports IPv6 out of the box.
Which is better for a beginner?
For a beginner who just wants a simple Linux server for a website or learning, OpenVZ is fine and cheaper. But if you want to experiment with different OSes or need to install custom software that requires kernel modules, KVM is more flexible and forgiving.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Nvidia RTX 4000 Super GPUs: Full Specs & Buying Guide
- Photoshop vs Lightroom AI Features Compared
- DNF vs DNF5: Which Package Manager?
- Car Trends Making Cars Worse: 7 Downsides
- Nostalgic Classic Games Revamped on G2A?
- Korean SUV Making BMW and Audi Owners Question Their Choices?