keepcalculator

06 Numbers and Powers

Pluto TV Keep Changing Channels? Fixes That Work

Card No. 06·82905 · Updated · Standard formula, shown below

If your Pluto TV app keeps changing channels on its own, the cause is almost always a stuck button on your remote, a faulty HDMI-CEC signal, or a glitchy app cache. This guide walks you through the exact fixes, from the quickest check to a full reset, so you can stop the channel surfing and get back to watching.

Why Does Pluto TV Change Channels by Itself?

Pluto TV itself doesn’t randomly change channels. The app only receives a channel-up or channel-down command when something sends it one. The usual suspects are:

  • Stuck buttons on the remote: A physical button that’s jammed or a remote with low batteries can send a continuous signal.
  • HDMI-CEC (Consumer Electronics Control): This feature lets devices control each other over HDMI. A glitchy CEC handshake can send unintended commands.
  • App or device cache corruption: Temporary data that’s become corrupted can cause the app to behave erratically.
  • Background apps or voice assistants: Sometimes another app or a voice command misinterprets audio and triggers a channel change.

The Quickest Fix: Check Your Remote

Before you dig into settings, do this simple test:

  1. Remove the batteries from your remote.
  2. Watch Pluto TV for a minute or two. If the channels stop changing, the remote is the culprit.
  3. If it’s a smart remote (like a Roku or Fire TV remote), also check if the physical buttons are stuck or if there’s debris around them. Press each button firmly a few times to free it.
  4. Replace the batteries with fresh ones, even if the old ones seemed fine. Low voltage can cause erratic signals.

If the problem persists without the remote, move on to the next fix.

Disable HDMI-CEC (Anynet+, Bravia Sync, etc.)

HDMI-CEC is a common cause of ghost commands. It’s designed to let you control multiple devices with one remote, but it can misfire. The setting has different names depending on your TV brand:

  • Samsung: Anynet+
  • LG: SIMPLINK
  • Sony: Bravia Sync
  • Vizio: CEC
  • Roku TV: 1-touch play (under System > Control other devices)

Find the CEC setting in your TV’s menu (usually under General, System, or Network) and turn it off. Then test Pluto TV. If the channel changes stop, you’ve found the issue. You can leave CEC off, or turn it back on later to see if it was just a one-time glitch.

Clear the App Cache and Data

A corrupted cache is a frequent cause of app weirdness. Clearing it forces the app to rebuild its temporary files. The steps vary by device:

  • Android TV / Fire TV: Go to Settings > Applications > Manage installed applications > Pluto TV. Select “Clear cache” and then “Force stop.” If the problem continues, also try “Clear data” (this will sign you out and reset your settings).
  • Roku: There’s no direct cache clear. Instead, go to the Pluto TV channel, press the * button on your remote, and choose “Remove channel.” Then reinstall it from the Roku Channel Store.
  • Apple TV: Double-click the TV button to open the app switcher, swipe up on Pluto TV to close it, then reopen it. If that doesn’t work, delete and reinstall the app.

Restart Your Device and Router

Sometimes a simple restart clears the glitch. This resets the network connection and clears temporary memory:

  1. Unplug your streaming device and your router from power.
  2. Wait 30 seconds.
  3. Plug the router back in and wait for it to fully boot up.
  4. Plug your streaming device back in and launch Pluto TV.

Update the App and Device Firmware

Outdated software can have bugs that have since been fixed. Ensure you have the latest version:

  • Pluto TV app: Go to your device’s app store, search for Pluto TV, and if an update is available, install it.
  • Device firmware: Check for system updates on your streaming device (e.g., Settings > System > About > Check for updates on Android TV, or Settings > System > System update on Roku).
  • TV firmware: If you’re using a smart TV’s built-in app, check the TV’s settings for a software update option.

Frequently Asked Questions

Why does Pluto TV change channels only on my smart TV, not on my phone?

This points to a device-specific issue—likely the TV’s remote or its HDMI-CEC settings. The phone app doesn’t have those hardware triggers, so if it works fine on your phone, the problem is in your TV’s environment.

Can a faulty HDMI cable cause channel changing?

Yes, a damaged or poorly shielded HDMI cable can cause electrical interference that triggers CEC commands. Try swapping the cable with a known good one, or connect the device to a different HDMI port.

Why does Pluto TV change channels when I press the volume button on my TV remote?

This is a classic CEC issue. Your TV remote’s volume button might be sending a signal that your streaming device interprets as a channel change. Disabling CEC on your TV should stop this.

Is this a known Pluto TV bug?

While Pluto TV does have occasional bugs, the “random channel change” issue is most often reported as a hardware or CEC problem. The app itself doesn’t have a feature that randomly changes channels. If you’ve tried all the fixes above and it still happens, you can report the issue through the Pluto TV help center.

Will uninstalling and reinstalling Pluto TV delete my favorites?

Yes, it usually will. Your favorite channels list is stored locally on your device. Before you uninstall, note your favorites or be prepared to re-add them after reinstalling. Your account sign-in will remain, but the local settings will reset.

When All Else Fails: Factory Reset

If you’ve tried everything and the issue persists, a factory reset of your streaming device is the last step. This will wipe all settings and apps, so only do it if you’re comfortable setting up your device again. The exact steps vary by device, but generally you’ll find it under Settings > System > Advanced > Reset. After the reset, set up your device and install only Pluto TV to test if the problem is gone. If it still changes channels, the issue is likely with your TV’s hardware, and you may need to contact the TV manufacturer.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →