keepcalculator

06 Numbers and Powers

Preparing Automatic Repair? What It Means & How to Fix

Card No. 06·83264 · Updated · Standard formula, shown below

If you see “Preparing Automatic Repair” on a black screen, your Windows PC has failed to start properly at least twice and is now entering the built-in recovery mode. This screen usually appears for a few minutes, and then either takes you to the blue “Automatic Repair” menu or loops back to the same message. The fix depends on why the startup failed — most commonly a corrupted system file, a recent driver or update, or a failing hard drive.

Why Windows Shows This Screen

Windows 10 and 11 automatically enter Automatic Repair after two consecutive failed boot attempts. The system detects that the normal startup process did not complete, so it launches a diagnostic tool that tries to find and fix the cause. The “Preparing Automatic Repair” message is the loading phase of that tool.

Common triggers include:

  • Corrupted system files — often from a sudden power loss or improper shutdown.
  • Recent driver or Windows update — a bad update can make the system unable to boot.
  • Failing hard drive or SSD — bad sectors or a dying drive can prevent Windows from loading critical files.
  • Damaged boot configuration data (BCD) — the file that tells Windows how to start may be missing or misconfigured.
  • Loose or failing cables — especially on desktop PCs with SATA drives.

Knowing the trigger helps you choose the right fix. If the problem started right after an update, rolling back that update is often the fastest solution. If it happened after a power cut, repairing system files is more likely to work.

What to Do When It Appears

First, be patient. The screen can legitimately sit for 5–10 minutes while Windows checks the disk and attempts repairs. If it finishes and boots, you are done. If it loops back to the same message, you need to interrupt the cycle.

  1. Force a shutdown by holding the power button for 10 seconds.
  2. Turn the PC back on and immediately start tapping the F11 key (or the key your manufacturer specifies for boot options).
  3. Choose Troubleshoot → Advanced options to reach the recovery tools.
  4. If you never reach that menu, you may need a Windows installation USB drive to access the same tools.

From the Advanced options menu, the most useful tools are Startup Repair, System Restore, and Command Prompt. Run Startup Repair first — it is the least technical option and fixes many common boot problems automatically.

Fixing the Underlying Problem

If Startup Repair fails, move to the other tools in order of likelihood:

  • System Restore — rolls back your system files and settings to an earlier date. This works well if a recent change broke the boot process. Choose a restore point from before the problem started.
  • Command Prompt with bootrec commands — type bootrec /fixmbr, then bootrec /fixboot, then bootrec /rebuildbcd. These commands repair the boot loader. Run them one at a time and restart after each.
  • DISM and SFC — from Command Prompt, run DISM /Online /Cleanup-Image /RestoreHealth followed by sfc /scannow. These repair corrupted system files. Note that DISM needs internet access in some cases.
  • Uninstall recent updates — in Advanced options, choose Uninstall Updates and remove the latest quality or driver update.

If none of these work, the problem is likely hardware. Test your hard drive with a tool like CrystalDiskInfo (from another PC) or check if the drive appears in BIOS. A clicking or very slow drive is a strong sign of failure.

How to Avoid This in the Future

Most “Preparing Automatic Repair” loops are preventable with basic maintenance:

  • Always shut down properly — avoid holding the power button unless the system is frozen.
  • Keep your system updated — but wait a week before installing major feature updates to catch known issues.
  • Use a surge protector — sudden power loss during a write operation is a leading cause of file corruption.
  • Check drive health yearly — run chkdsk or a SMART test to catch failing drives early.
  • Create a recovery drive — a USB stick with Windows recovery tools lets you access the same repair options even if the built-in recovery partition is damaged.

If you already have important files on the PC, back them up now if you can still boot into Windows. If you cannot boot, you may be able to recover files by connecting the drive to another computer as an external drive.

When to Reinstall Windows

If you have tried all the repair tools and the loop continues, a clean reinstall is often faster than continuing to troubleshoot. You can reinstall Windows without losing personal files by choosing “Keep my files” during setup — but this only works if the system can boot from a USB drive. If the drive itself is failing, a reinstall will not help; replace the drive first.

Before reinstalling, try one last thing: disconnect all external devices (printers, USB drives, second monitors) and try booting again. A faulty external device can sometimes cause a boot loop that looks exactly like a system failure.

Frequently Asked Questions

How long should I wait on “Preparing Automatic Repair”? Give it 10–15 minutes. If it stays on that screen longer or restarts repeatedly, interrupt the cycle and use the recovery tools.

Will I lose my files if I run Startup Repair? No. Startup Repair only attempts to fix boot files and system settings. It does not touch your personal documents, photos, or installed programs. System Restore also preserves personal files, though it may remove recently installed apps.

Why does it loop back to the same screen after a restart? That means the repair tool itself cannot fix the underlying issue, or the boot files are too damaged for the automatic tool to handle. You need to use Command Prompt or reinstall Windows.

Can a failing hard drive cause this? Yes. Bad sectors or a dying drive can prevent Windows from reading critical boot files. If repair tools run but never succeed, test the drive’s health with a SMART tool or listen for unusual clicking noises.

Does this happen on Windows 11 too? Yes, both Windows 10 and 11 use the same Automatic Repair system. The fixes described here work on both versions.

Is there a way to skip Automatic Repair and boot normally? You can try pressing Esc or Enter when the screen appears, but if the system cannot boot, it will simply return to the repair screen. The only reliable way past it is to fix the underlying problem.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →