keepcalculator

06 Numbers and Powers

Select Startup Disk on Mac Desktop

Card No. 06·85178 · Updated · Standard formula, shown below

To quickly select a startup disk on a Mac desktop, restart your Mac and immediately hold down the Option (⌥) key until the Startup Manager appears, then click the disk you want to boot from. This works on both Intel and Apple silicon Macs, though the key combination differs slightly on Apple silicon. The Startup Manager lets you choose a different volume, such as an external drive or a macOS Recovery partition, without changing your default startup disk permanently.

What Is the Startup Manager?

The Startup Manager is a built-in boot picker in macOS. It appears when you press and hold a specific key or key combination during startup. It shows all available bootable volumes—internal drives, external USB or Thunderbolt drives, network volumes (if supported), and macOS Recovery partitions. You select one with the mouse, trackpad, or arrow keys, then press Enter or click the arrow button to boot from it.

On Intel Macs, the Startup Manager is triggered by holding Option immediately after pressing the power button. On Apple silicon Macs, you press and hold the power button (the Touch ID button) until the “Loading startup options” message appears, then release. The startup disk selection is temporary—it only affects that single boot. The next time you restart, your Mac boots from the default startup disk again.

How to Access Startup Manager on Intel Macs

  1. Shut down your Mac completely (Apple menu ▸ Shut Down).
  2. Press the power button, then immediately press and hold the Option key.
  3. Keep holding until you see a window with all bootable volumes.
  4. Select the desired disk and click the up arrow below it, or press Return.

If you have a Mac with a T2 security chip, you may need to allow external booting in Startup Security Utility first. That utility is inside macOS Recovery. If you don’t see an external disk, check that it’s connected and formatted correctly (APFS or Mac OS Extended for Mac boot volumes).

How to Access Startup Manager on Apple Silicon Macs

  1. Shut down your Mac.
  2. Press and hold the power button (Touch ID button) until the “Loading startup options” screen appears.
  3. Click the disk you want to use, then click Continue.
  4. If you want to boot from a different volume permanently, you can set it in System Settings ▸ General ▸ Startup Disk.

On Apple silicon, the Startup Manager also gives you access to Options (macOS Recovery) and, in some cases, a “Share Disk” mode for Mac-to-Mac file transfers. The same key—power button—is used for both starting up and entering the boot picker, so you must hold it long enough (about 10 seconds) to see the options.

Why Would You Need to Select a Startup Disk?

You might need to boot from a different disk for several reasons:

  • Your main drive is failing or corrupted, and you want to start from an external backup or recovery partition.
  • You installed a beta version of macOS on a separate volume and want to test it.
  • You’re troubleshooting a hardware issue and want to boot from a known-good system.
  • You’re using a portable external drive with macOS installed and want to run it on a different Mac.
  • You need to access macOS Recovery to repair the disk or reinstall the OS.

The Startup Manager is the fastest way to do any of these without permanently changing your default startup disk. It’s a temporary choice, unlike the Startup Disk pane in System Settings, which sets the default for every boot.

Setting a Permanent Default Startup Disk

If you want your Mac to always boot from a specific disk, use the Startup Disk preference pane:

  1. Open System Settings (or System Preferences on older macOS).
  2. Click General, then Startup Disk.
  3. Click the lock icon and enter your administrator password if required.
  4. Select the disk you want, then click Restart.

On Apple silicon Macs, you can also hold the power button to enter Startup Manager, select a disk, and then choose “Always Use” before clicking Continue. That sets the default as well. Note that on Apple silicon, the startup disk is stored per user, so each user can have a different default if they have administrator privileges.

Common Problems and Troubleshooting

If the Startup Manager doesn’t appear, try these steps:

  • Make sure you’re pressing the key immediately after pressing the power button—waiting even a second can miss the window.
  • On Apple silicon, hold the power button longer (about 10 seconds) until you see the loading options text.
  • If you have a wireless keyboard, it may not be recognized during startup. Use a wired keyboard or connect it via USB.
  • Check that the external drive is powered on and connected directly to the Mac (not through a hub).
  • If the disk doesn’t appear, it may not be bootable—verify it has a valid macOS installation and is formatted with GUID Partition Map.
  • On Intel Macs with a T2 chip, you may need to allow booting from external media in Startup Security Utility.

If you see a “No Bootable Device” error, the selected disk is not valid. Try a different disk or enter macOS Recovery (hold Command-R on Intel, or hold power button and choose Options on Apple silicon) to repair the disk.

Alternative Ways to Choose a Startup Disk

Besides the Startup Manager, there are other methods:

  • System Settings ▸ General ▸ Startup Disk – sets the default permanently.
  • macOS Recovery – in Recovery, you can use the Startup Disk utility to set the default.
  • Command-line – in Terminal, you can use sudo bless --mount /Volumes/YourDisk --setBoot on Intel Macs. On Apple silicon, this is not supported; use System Settings instead.
  • Boot Camp – if you have Windows installed, you can use the Boot Camp Control Panel in Windows to select the macOS or Windows startup disk.

For most users, the Startup Manager is the quickest and easiest method because it doesn’t require changing settings and works even if macOS won’t boot normally.

Frequently Asked Questions

What key do I press to select a startup disk on a Mac?

On Intel Macs, press and hold the Option (⌥) key during startup. On Apple silicon Macs, press and hold the power button until you see “Loading startup options.”

How do I boot from an external drive on a Mac?

Connect the external drive, restart your Mac, and hold Option (Intel) or the power button (Apple silicon) to open Startup Manager. Select the external drive and click the arrow. If it doesn’t appear, ensure it’s bootable and properly formatted.

Can I permanently change my startup disk?

Yes. Open System Settings ▸ General ▸ Startup Disk, select the disk, and click Restart. On Apple silicon, you can also choose “Always Use” in Startup Manager.

Why doesn’t my external drive show up in Startup Manager?

Possible reasons: the drive is not bootable, not formatted correctly, not connected directly, or the Mac’s security settings block external booting. Check the drive format (GUID Partition Map, APFS or Mac OS Extended) and, on T2 or Apple silicon Macs, adjust Startup Security Utility.

Does selecting a startup disk in Startup Manager permanently change my default?

No. The Startup Manager selection is temporary—it only affects the current boot. To change the default permanently, use System Settings or the “Always Use” option.

What if my Mac doesn’t respond to the Option key?

Try a wired keyboard, press the key earlier (immediately after powering on), or reset the NVRAM on Intel Macs (shut down, then press Option+Command+P+R during startup). On Apple silicon, make sure you hold the power button long enough.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →