keepcalculator

06 Numbers and Powers

Startup Security Utility Mac: What It Does & How to Use

Card No. 06·74767 · Updated · Standard formula, shown below

Startup Security Utility on a Mac controls how your computer starts up, specifically whether it can boot from an external drive and whether the Intel-based Mac requires a password to start. You use it to set a firmware password, change the secure boot policy, or allow booting from external media on Apple silicon and certain Intel Macs. This article explains what each setting does, when you need it, and how to access it safely.

What Is Startup Security Utility?

Startup Security Utility is a built-in macOS tool that manages the security of the startup process. It exists in two forms: one for Apple silicon Macs (M1 and later) and one for Intel Macs with a T2 security chip. On Apple silicon, it controls the Secure Boot policy and external boot permissions. On Intel T2 Macs, it adds a firmware password option and full secure boot settings. The utility is not a standalone app you can launch from the Applications folder; it lives inside macOS Recovery.

How to Open Startup Security Utility

The steps differ depending on your Mac’s chip. On Apple silicon, shut down the Mac, then press and hold the power button until you see “Loading startup options.” Click Options, then Continue. If asked, select a user account and enter its password. In the Recovery app menu bar, choose Utilities > Startup Security Utility. On an Intel T2 Mac, restart and immediately hold Command (⌘) + R until the Apple logo appears. Then go to Utilities > Startup Security Utility. If you have a FileVault-encrypted disk, you may need to unlock it first.

Secure Boot Settings Explained

Secure Boot ensures that only trusted, Apple-signed operating system software loads at startup. On both chip types you get three options:

  • Full Security: The default. The Mac allows only the current version of macOS, or a version Apple still trusts, to boot. This is the most secure choice.
  • Medium Security: Available on Apple silicon. Allows older versions of macOS that Apple no longer signs, but still verifies the software is legitimate. Useful if you need to boot an older OS for compatibility.
  • No Security: Allows any version of macOS, including unsigned or modified versions. Only use this if you are intentionally running custom software or a non-Apple OS.

On Intel T2 Macs, the options are slightly different: Full Security, Medium Security, and No Security, but Medium Security on Intel does not allow unsigned software; it only permits older Apple-signed versions.

External Boot: Allowing Boot from a USB or Other Drive

By default, Apple silicon Macs will not boot from an external drive unless you explicitly allow it. This is a security measure to prevent someone from booting your Mac with a modified operating system. To change it, open Startup Security Utility and select “Allow booting from external media.” On Intel T2 Macs, the same toggle exists. After enabling it, restart while holding the Option (⌥) key to choose the external drive. Keep in mind that if you have a firmware password set, you will need to enter it before the external boot option appears.

Firmware Password: What It Does and How to Set It

A firmware password prevents your Mac from starting up from any disk other than the designated startup disk without entering the password. It also blocks access to macOS Recovery and the Startup Manager. This is a strong deterrent against theft and unauthorized access. To set it on an Intel T2 Mac, open Startup Security Utility and click “Set Firmware Password.” On Apple silicon, the firmware password is managed differently: you turn it on from the Recovery assistant, and it is called a “macOS Recovery password.” After setting it, you must enter the password to change startup disk, boot into Recovery, or erase the Mac. If you forget it, you cannot reset it yourself; you must contact Apple Support with proof of purchase.

When You Should Change These Settings

Most users never need to open Startup Security Utility. The default Full Security and no external boot are the safest and work for normal daily use. You might need to change settings if:

  • You are a developer or IT professional testing older macOS versions or custom kernels.
  • You want to run Linux or another OS from an external drive.
  • You are troubleshooting a Mac that won’t boot and need to boot from an external installer.
  • You are preparing a Mac for sale and want to remove a firmware password (you must know the current password).

After making changes, always return the settings to Full Security and disable external boot unless you have an ongoing need. Leaving them open reduces the security of your Mac.

Common Problems and How to Fix Them

One common issue is the utility not opening because you are not in the correct Recovery mode. On Apple silicon, make sure you press and hold the power button until you see the options screen, not just a brief press. On Intel, if Command+R does not work, try Option+Command+R to load Internet Recovery. Another issue is the “Cannot verify the startup disk” error when booting from an external drive; this usually means Secure Boot is set to Full Security. Set it to Medium or No Security, but only temporarily. If you forget your firmware password, there is no software workaround; you must take the Mac to an Apple Store or authorized service provider. If you see “Startup Security Utility is not available” on an older Mac, your machine likely does not have a T2 chip or Apple silicon, so the utility does not exist for it.

Startup Security Utility vs. Other Mac Security Tools

Startup Security Utility is often confused with FileVault and the login password, but they are different layers. FileVault encrypts your disk so data is unreadable without the password; it protects your files if the drive is removed. The login password is what you enter at the user login screen. Startup Security Utility protects the boot process itself, stopping someone from booting a different OS or tampering with the system. For maximum security, use all three: a strong login password, FileVault enabled, and Full Secure Boot with a firmware password if you are on an Intel T2 Mac. On Apple silicon, the hardware is already secure by design, but you can still set a Recovery password for an extra layer.

Frequently Asked Questions

Is Startup Security Utility available on all Macs?

No. It is only available on Macs with Apple silicon (M1 or later) or Intel Macs with a T2 security chip. Older Intel Macs without a T2 chip do not have this utility; they rely on a simpler firmware password utility in Recovery.

Can I reset a forgotten firmware password?

No, not by yourself. If you forget the firmware password, you must contact Apple Support or visit an Apple Store with proof of purchase. They can remove it using special hardware. This is why Apple recommends you remember it or store it somewhere safe.

Will changing Secure Boot to No Security let me install Windows or Linux?

For Linux, yes, you may need to set Secure Boot to No Security or Medium Security depending on the distribution. For Windows, you can use Boot Camp Assistant on Intel Macs, but on Apple silicon, Windows is not officially supported, and changing Secure Boot will not help. Always check the specific OS requirements before changing settings.

Does Startup Security Utility affect performance?

No. The secure boot checks happen before the operating system loads and take only a few seconds. Once macOS is running, there is no performance impact. The settings only control what is allowed to boot, not how fast the system runs.

Why can’t I see the external boot option even after enabling it?

Make sure the external drive is properly formatted and connected before restarting. Also, if you have a firmware password set, you must enter it after the startup chime. On Apple silicon, you also need to press and hold the Option key during startup to see the drive list. If it still does not appear, the drive may not be bootable or may be formatted with a filesystem macOS cannot read.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →