keepcalculator

06 Numbers and Powers

Largest Telescope in the World: A Space Exploration Leap?

Card No. 06·83912 · Updated · Standard formula, shown below

Limiting magnitude 17.96 mag
Light collecting area
1,194.59 m^2
Result
Exposure time
60 min
You entered
Telescope diameter
39 m
You entered
You enter
Exposure time, Telescope diameter
You get
Limiting magnitude, Light collecting area
Rounding
2 dp

Yes, the largest telescope in the world represents a giant leap for space exploration, but not in the way most people imagine. It does not travel to space; instead, it collects more light and resolves finer details than any previous ground-based observatory, allowing astronomers to study the earliest galaxies, exoplanet atmospheres, and dark energy with unprecedented clarity. This article explains what the current largest telescope is, how it works, what it can see, and how it compares to space-based observatories like Hubble and Webb.

Formula

The limiting magnitude (the faintest star a telescope can detect) is approximated by:

m = 5 × log₁₀(D × 100) + 2.5 × log₁₀(t / 60)

  • m = limiting magnitude (unitless, larger means fainter)
  • D = telescope diameter in meters
  • t = exposure time in minutes

This formula assumes perfect optics, dark skies, and a typical CCD camera sensitivity. Real telescopes lose some sensitivity to mirror reflectivity and atmospheric absorption.

Worked Example

Using the default values (D = 39 m, t = 60 min):

  1. Calculate 5 × log₁₀(39 × 100) = 5 × log₁₀(3900) = 5 × 3.591 = 17.96
  2. Calculate 2.5 × log₁₀(60 / 60) = 2.5 × log₁₀(1) = 0
  3. Add: 17.96 + 0 = 17.96

The limiting magnitude is about 18, meaning it can detect objects 18 magnitudes fainter than a reference star – roughly 10 million times fainter than the naked-eye limit of magnitude 6.

What Is the Largest Telescope in the World?

As of 2025, the largest optical/infrared telescope in the world is the Extremely Large Telescope (ELT), built by the European Southern Observatory (ESO) on Cerro Armazones in Chile’s Atacama Desert. Its primary mirror is 39.3 meters in diameter, composed of 798 hexagonal segments. It is expected to achieve first light in the late 2020s.

Before the ELT, the largest was the Gran Telescopio Canarias (GTC) in Spain’s Canary Islands, with a 10.4-meter segmented mirror. The ELT is more than three times wider, giving it about 14 times more light-collecting area.

How a Giant Ground Telescope Works

Large telescopes work by gathering photons with a big primary mirror, reflecting them to a secondary mirror, and then to scientific instruments. The ELT uses an adaptive optics system with a deformable secondary mirror (4.2 meters wide) that corrects atmospheric blur in real time. A laser guide star creates an artificial reference point in the sky, allowing the system to measure and cancel turbulence.

Key components:

  • Primary mirror – 39.3 m segmented, collects light
  • Secondary mirror – 4.2 m, adaptive, corrects distortion
  • Tertiary mirror – 3.75 m, flat, directs light to instruments
  • Instruments – cameras and spectrographs that analyze light

The ELT operates in visible and infrared wavelengths, where most cosmic phenomena emit their light.

Why Size Matters: Resolution and Light Gathering

Two properties make a larger telescope better:

  • Light gathering – the area of the mirror determines how many photons it collects. More photons mean fainter objects can be seen and shorter exposures are needed.
  • Angular resolution – the ability to distinguish fine detail. Resolution is proportional to wavelength divided by diameter. A 39-meter mirror can resolve details about 10 times finer than Hubble at the same wavelength, even with atmospheric correction.

For example, the ELT could image a coin on the Moon’s surface (about 1 meter across) from Earth, something no current telescope can do.

Comparison: Ground vs. Space Telescopes

Space telescopes like Hubble (2.4 m) and James Webb (6.5 m) avoid atmospheric distortion entirely, but they are limited in size by rocket fairings. The ELT, being ground-based, can be much larger but must correct for the atmosphere.

Advantages of ground-based giants:

  • Much larger aperture (39 m vs. 6.5 m)
  • Cheaper per square meter of mirror
  • Easier to upgrade and repair

Advantages of space telescopes:

  • No atmospheric absorption (can see UV and X-rays)
  • No weather or light pollution
  • Stable thermal environment

In practice, they complement each other: the ELT will study exoplanet atmospheres in detail, while Webb can see the earliest infrared light from the first galaxies.

What Will the ELT Actually Discover?

The ELT’s main scientific goals are:

  • Direct imaging of exoplanets – it will be able to take pictures of Earth-sized planets around nearby stars and analyze their atmospheres for water, oxygen, and methane.
  • First galaxies – it will observe galaxies that formed just a few hundred million years after the Big Bang, studying how they evolved.
  • Dark energy and dark matter – precise measurements of galaxy motions and supernovae will test cosmological models.
  • Black holes – it will measure the orbits of stars around the Milky Way’s central black hole with unprecedented accuracy.
  • Variable stars and supernovae – it will detect and monitor transient events across the sky.

These observations will likely lead to discoveries we cannot predict, just as previous large telescopes found quasars, exoplanets, and dark energy.

Challenges and Limitations of Giant Telescopes

Building and operating a 39-meter telescope is not without problems:

  • Cost – the ELT is estimated to cost over €1.5 billion, a significant investment for a scientific instrument.
  • Engineering complexity – aligning 798 mirror segments to within nanometers requires constant monitoring and adjustment.
  • Atmospheric variability – even with adaptive optics, some residual blur remains, especially in visible light.
  • Weather and site constraints – the telescope is at 3,060 meters altitude in the Atacama Desert, one of the driest places on Earth, but cloud cover and wind still affect observations.
  • Light pollution – even at remote sites, artificial light can degrade observations, though the Atacama is among the darkest locations.

These challenges are being addressed with advanced engineering, but they set practical limits on how large future telescopes can be.

Frequently Asked Questions

Is the ELT larger than the James Webb Space Telescope?

Yes, the ELT’s primary mirror is 39.3 meters in diameter, while Webb’s is 6.5 meters. The ELT has about 36 times more light-collecting area. However, Webb sees in the infrared from space, so it can detect wavelengths that the ELT cannot.

Why build a giant telescope on the ground instead of in space?

Cost and size. A 39-meter mirror would not fit in any current rocket fairing, and assembling it in space would be extremely expensive. Ground-based telescopes are also easier to maintain and upgrade. The atmosphere is a problem, but adaptive optics solves most of it.

Can the ELT see exoplanets directly?

Yes, it is designed to do so. Using a coronagraph to block the star’s light, the ELT will be able to image planets a few times the size of Earth around nearby stars and take spectra of their atmospheres to look for biosignatures like oxygen and methane.

When will the ELT be operational?

The ELT is expected to achieve first light in 2028, with full scientific operations beginning shortly after. Construction began in 2017, and the telescope structure is being assembled on Cerro Armazones.

How does the ELT compare to the Hubble Space Telescope?

The ELT has a much larger mirror (39.3 m vs. 2.4 m), giving it far greater light gathering and resolution. However, Hubble observes in ultraviolet and visible light from space, avoiding atmospheric absorption entirely. The ELT will not see UV light because the atmosphere blocks it.

Will the ELT replace space telescopes?

No. Space telescopes like Webb observe wavelengths that the atmosphere blocks (like mid-infrared and UV), and they provide a stable environment for precision measurements. The ELT will work alongside them, with each covering different wavelengths and capabilities.

Related

Formula used
in t | Exposure time | min | 60 | 0 | 1440
in d | Telescope diameter | m | 39 | 0 | 100
out mag | Limiting magnitude | mag | 5 * log10(d * 100) + 2.5 * log10(t / 60) | 2
out area | Light collecting area | m^2 | pi * (d / 2)^2 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →