keepcalculator

06 Numbers and Powers

Uninstall Paragon NTFS for Mac: Full Guide

Card No. 06·72083 · Updated · Standard formula, shown below

If you need to uninstall Paragon NTFS for Mac, the process involves removing the app, its system extension, and leftover files. This guide explains the correct steps for both Intel and Apple Silicon Macs, what to do if the uninstaller fails, and how to manually clean up remaining components.

Why Uninstall Paragon NTFS for Mac?

Paragon NTFS for Mac is a commercial driver that lets macOS read and write to Windows-formatted NTFS drives. Users typically remove it for one of several reasons:

  • They no longer need NTFS write access (e.g., they switched to exFAT drives).
  • They are replacing it with a free or built-in alternative.
  • They experience kernel panics, slow external drive performance, or system instability after a macOS update.
  • They want to free up disk space or remove trial-version clutter.

Whatever the reason, a clean removal matters because Paragon installs a system extension that loads at boot. If you only drag the app to the Trash, the extension and helper tools can remain active and cause conflicts later.

What Paragon NTFS Installs on Your Mac

Paragon NTFS for Mac is not a single app. Its installer places several components on your system:

  • The main app – usually in /Applications/Paragon NTFS & HFS+ or similar.
  • A system extension – a kernel extension (kext) on Intel Macs or a system extension on Apple Silicon. This is what actually handles NTFS read/write.
  • A preference pane – in System Settings (macOS Ventura or later) or System Preferences (earlier versions).
  • Helper tools and daemons – background processes that manage mounting and licensing.
  • Receipts and caches – in /Library/Receipts and ~/Library/Caches.

Knowing these components is the first step to a complete removal.

Standard Uninstall Method (Recommended)

Paragon provides an uninstaller utility with the app. This is the safest way to remove all components. Here is the general process:

  1. Quit the Paragon NTFS app and any related menu bar items.
  2. Open the folder where Paragon NTFS is installed (usually /Applications/Paragon NTFS for Mac).
  3. Look for an uninstaller script or app – often named “Uninstall Paragon NTFS” or “Remove Paragon NTFS.”
  4. Run the uninstaller and follow the on-screen prompts. You may need to enter your administrator password.
  5. Restart your Mac when prompted.

On Apple Silicon Macs, the uninstaller may also ask you to approve the removal of the system extension in System Settings > General > Login Items & Extensions. Approve it to finish the job.

Manual Removal: Step-by-Step for Stubborn Installations

If the uninstaller is missing, fails, or you want to verify nothing is left, you can manually remove the components. This is more involved but works on both Intel and Apple Silicon.

Before you start: Back up any important data on NTFS drives you plan to keep using. Once the driver is gone, macOS can only read NTFS drives, not write to them.

  1. Quit the app – Use Activity Monitor to check for processes like “ParagonNTFS” or “fsck_ntfs” and quit them.
  2. Remove the app – Drag the Paragon NTFS app from /Applications to the Trash.
  3. Remove the system extension – On Intel Macs, the kext is usually at /Library/Extensions/paragon-ntfs.kext. On Apple Silicon, go to System Settings > General > Login Items & Extensions, find the Paragon extension, and click the minus button. Then delete any remaining files in /Library/Extensions or /Library/SystemExtensions.
  4. Remove preference panes – Look in /Library/PreferencePanes/ for “ParagonNTFS.prefPane” and delete it.
  5. Remove helper tools – Check /Library/PrivilegedHelperTools/ for files like “com.paragon-software.ntfs.loader” and delete them.
  6. Remove support files – Delete folders and plists in /Library/Application Support/Paragon Software/, /Library/Preferences/, and ~/Library/Preferences/ that contain “paragon” or “ntfs” in the name.
  7. Remove caches and receipts – Delete caches in ~/Library/Caches/ and receipts in /Library/Receipts/ that mention Paragon.
  8. Restart – Reboot to clear any loaded extensions from memory.

If you are unsure about deleting a file, leave it. A leftover preference file is harmless; a leftover kext is not.

What to Do If the Uninstaller Fails

Sometimes the uninstaller gets stuck or reports an error. Common causes and fixes:

  • System extension is in use – Close all apps that access NTFS drives, unmount all NTFS volumes, then try again.
  • macOS security blocks it – Go to System Settings > Privacy & Security and allow the uninstaller to run if prompted.
  • Apple Silicon approval needed – After running the uninstaller, you may need to restart and then approve the extension removal in System Settings.
  • Corrupted installer – Re-download the uninstaller from Paragon’s website (if available) or use the manual method above.

If you still see “Paragon” in System Information > Software > Extensions, you may need to boot into Recovery Mode and disable SIP temporarily to remove a stubborn kext. This is advanced and should only be done if you are comfortable with the risks.

What Happens to Your NTFS Drives After Uninstall?

After removing Paragon NTFS for Mac, macOS reverts to its built-in NTFS support:

  • You can still read NTFS drives normally.
  • You cannot write to them without third-party software or a workaround.
  • If you try to copy files to an NTFS drive, you will get “Read-only file system” or “Operation not permitted” errors.

This is a common surprise for users who uninstall the driver but still need to move files to a Windows drive. Before uninstalling, copy any files you need to write to an exFAT or FAT32 drive, or reformat the NTFS drive to exFAT (which macOS fully supports) if you no longer need Windows compatibility.

Alternatives to Paragon NTFS for Mac

If you are uninstalling because of cost, performance, or compatibility issues, here are the main alternatives:

  • macOS built-in read-only support – Free, but write is not supported.
  • exFAT formatting – Not a driver, but a file system that both macOS and Windows can read and write natively. Reformat your drive to exFAT if you do not need NTFS-specific features.
  • Free NTFS write tools – Some open-source options exist, but they are less reliable and may also require system extensions. Always research current compatibility with your macOS version.
  • Other commercial drivers – There are a few competing products, but they have similar installation and removal processes. Check reviews for your specific macOS version.

If you only need to transfer files occasionally, consider using a cloud service or a small exFAT USB stick instead of installing a driver.

Frequently Asked Questions

Do I need to uninstall Paragon NTFS before updating macOS?

Not necessarily, but it is recommended. Major macOS updates can break third-party kernel extensions, causing boot issues or kernel panics. If you encounter problems after an update, uninstalling and reinstalling the latest version of Paragon NTFS usually fixes them.

Can I just drag the Paragon NTFS app to the Trash?

Dragging the app to the Trash removes the main interface but leaves the system extension and helper tools running. This can lead to conflicts or leftover processes. Always use the uninstaller or follow the manual steps for a complete removal.

Will uninstalling Paragon NTFS delete my files on NTFS drives?

No. Uninstalling the driver only removes the software from your Mac. Your NTFS drives and their contents are untouched. You just lose the ability to write to them from macOS.

How do I know if Paragon NTFS is still installed?

Check System Settings > General > Login Items & Extensions for a Paragon extension. Also look in /Applications for the app, and run “kextstat | grep paragon” in Terminal on Intel Macs. If any of these show Paragon, it is still installed.

Is it safe to delete the Paragon folder in /Library/Application Support?

Yes, after uninstalling the app and extension, the support folder only contains preferences and caches. Deleting it is safe and part of a clean removal.

What if I reinstalled macOS and Paragon NTFS is still there?

If you upgraded macOS without erasing the disk, the driver may survive. Follow the manual removal steps above. If you erased the disk and reinstalled, Paragon should be gone unless you restored from a backup that included it.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →