Before switching nbn providers in Australia, you should check your current contract’s exit fees, your new plan’s typical speed and price, and whether the new provider uses the same nbn technology type at your address. These three factors determine most of the cost and performance you’ll experience after the switch. The process itself is usually straightforward, but a few overlooked details can lead to unexpected bills, slower speeds, or a gap in service.
Understanding the nbn technology at your address
The nbn network uses several different technologies to connect homes, and the one at your address has a big impact on the speeds you can actually get. The main types are:
- FTTP (Fibre to the Premises) – fibre runs all the way to your home, capable of the fastest and most consistent speeds.
- FTTC (Fibre to the Curb) – fibre runs to a small pit outside your property, then copper to your home.
- FTTN (Fibre to the Node) – fibre runs to a street cabinet, then copper to your home; speeds depend heavily on distance from the node.
- HFC (Hybrid Fibre Coaxial) – uses pay TV cable infrastructure; speeds are generally good but can vary with congestion.
- Fixed Wireless – a radio link from a local tower; speeds depend on signal strength and network congestion.
Your technology type is shown when you check your address on the nbn website. It matters because a plan advertised as “up to 100 Mbps” may only deliver 50 Mbps on FTTN if your line is long. When comparing providers, look for plans that state a “typical evening speed” – this is a more realistic estimate than the maximum speed. The ACCC requires providers to publish typical speeds, so you can compare them directly.
Checking your current contract and exit fees
If you’re still within your current provider’s contract term, you may have to pay an early exit fee. This fee can range from around $0 to several hundred dollars, depending on the provider and how much time is left on your contract. Contact your current provider or check your latest bill to find out:
- Whether you’re on a month-to-month plan or a fixed term (usually 12 or 24 months).
- The exact exit fee, if any, and whether it decreases over time.
- Whether you need to return any equipment (like a modem or router) and if there’s a fee for not returning it.
Some providers also charge a “disconnection” or “administration” fee even after the contract ends, though this is less common. Factor any exit fee into your decision: if you’re saving $20 per month but paying a $150 exit fee, it will take over 7 months to break even.
Comparing plans beyond the headline price
When comparing nbn plans, look past the advertised monthly price. Consider these factors:
- Typical evening speed – this is the speed you’ll likely get during peak hours (7pm–11pm). Compare this across providers for the same speed tier.
- Setup or activation fees – some providers charge a one-off fee to connect your service, especially if you’re a new customer or if a technician visit is needed.
- Modem/router costs – some plans include a modem for free, others charge a rental fee or require you to buy one.
- Contract length – month-to-month plans are more flexible but may have a higher monthly price.
- Data allowances – most plans are unlimited, but some budget plans still have caps.
- Discounts that expire – many providers offer a discount for the first 6 or 12 months, after which the price increases. Check the “ongoing price” after the discount period.
Use comparison websites to see a wide range of plans, but always check the provider’s own website for the final terms. The ACCC’s “Broadband Speed Claims” guidelines require providers to offer a minimum speed, and if they can’t meet it, you may be entitled to a remedy.
How the switching process works
Switching nbn providers is generally simple because the nbn network itself is the same – you’re only changing your retail service provider. The process usually works like this:
- Choose a new plan and sign up online or by phone. You’ll need your address and sometimes your current provider’s account number.
- The new provider will contact your current provider to arrange the transfer. This is called a “churn” and is usually handled automatically.
- You’ll receive a confirmation with your new service activation date. This is typically within a few business days, but can be longer if a technician visit is required.
- On the activation day, your new service goes live, and your old one is disconnected. You may need to restart your modem or reconfigure it with new settings.
If you’re moving from one nbn technology to another (e.g., from FTTN to FTTP), a technician may need to visit your home to install new equipment. This is usually arranged by your new provider and may take longer. If you’re switching between providers on the same technology, there’s usually no need for a technician visit.
Common problems and how to avoid them
While most switches go smoothly, a few issues can arise:
- Service gap – if the new provider can’t activate on the promised date, you may be without internet for a day or two. To avoid this, ask if they offer a “same day” or “no gap” guarantee.
- Modem compatibility – not all modems work with all providers. Check that your existing modem is compatible with the new provider’s network (especially if you have FTTC or HFC, which require specific connection types).
- Speed not as expected – if your new plan’s typical speed is lower than what you had, you may notice a difference. Always compare typical speeds, not just maximums.
- Billing overlap – you may be billed by both providers for a few days if the switch isn’t perfectly timed. Check your final bill from the old provider to ensure you’re not charged for days after the switch.
If you experience problems, contact your new provider first – they are responsible for the service from the activation date. If the issue is with the nbn network itself, they can lodge a fault with nbn Co on your behalf.
Costs to watch out for
Beyond the monthly plan price, be aware of these potential costs:
- Exit fees from your current provider (as discussed).
- Modem rental or purchase – some providers charge $5–$10 per month for a modem rental, or a one-off fee of $100–$200 if you buy it.
- Installation or activation fees – typically $0–$100, but can be higher for FTTP upgrades.
- Postage for equipment – some providers charge for shipping your modem.
- Early termination of bundled services – if your internet is bundled with phone or streaming services, you may need to cancel those separately, which could incur fees.
Always read the critical information summary (CIS) for the plan. This is a standard document that lists all fees, contract terms, and speeds in a consistent format, making it easier to compare.
Frequently Asked Questions
Will I lose my email address if I switch nbn providers?
Yes, if your email address is provided by your current internet provider (e.g., @bigpond.com or @optusnet.com.au), you will lose it when you cancel your service. To avoid losing important emails, set up a free email account (like Gmail or Outlook) and forward your contacts and emails before switching. Some providers offer a paid “email forwarding” service for a short period, but it’s not guaranteed.
How long does it take to switch nbn providers?
For a simple transfer between providers on the same nbn technology, it usually takes 1–5 business days. The new provider will give you an activation date when you sign up. If a technician visit is needed (e.g., for FTTP or a new connection), it can take longer – sometimes up to 2–3 weeks. Ask your new provider for a specific timeframe before committing.
Can I keep my existing modem when switching?
Often yes, but only if the modem is compatible with the new provider’s network. For FTTP and FTTC, most modems work. For HFC and FTTN, you may need a modem that supports those connection types. Check with your new provider if your modem model is supported. If not, you may need to buy or rent one from them.
What happens if my new provider can’t deliver the advertised speed?
Under ACCC rules, providers must offer a minimum speed that is at least the “typical evening speed” they advertise. If you consistently get speeds below that, you can complain to your provider. They may troubleshoot, offer a lower-cost plan, or let you exit without penalty. If they don’t resolve it, you can escalate to the Telecommunications Industry Ombudsman (TIO) for free.
Do I need to cancel my current plan before switching?
No, you don’t need to cancel your current plan yourself. The new provider will handle the transfer, and your old service will be automatically cancelled on the activation date. However, you should check your final bill to ensure you’re not charged after that date. If you have a contract with exit fees, those will be billed separately.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Arctic Sea Ice Forecasts Disagree: What to Do
- MySQL Workbench to VPS: SSH Tunnel Setup
- Bluesky Beginners Guide: How to Get Started5.00 min/km
- LG V20 Won’t Turn On? Fixed
- Snagit vs Camtasia: Which One Do You Need?
- Scale a Small Business Without Losing Culture