Anbernic and Retroid are the two biggest names in retro gaming handhelds, and the right choice comes down to whether you prioritize build quality and compatibility or raw power and modern game streaming. Anbernic offers a wider range of devices with excellent emulation up to PlayStation 2 and GameCube, while Retroid focuses on higher-performance Android handhelds that also handle Switch emulation and PC streaming. This guide breaks down the key differences to help you decide which brand fits your gaming habits and budget.
Background: Two Approaches to Retro Gaming
Anbernic started as a maker of Linux-based handhelds and has expanded into Android devices, offering dozens of models across price points. Their lineup includes the budget RG35XX series, the mid-range RG405M, and the powerful RG556. Retroid, a newer brand, focuses exclusively on Android handhelds like the Pocket 2S, Pocket 3+, and Pocket 4 Pro, prioritizing performance and ergonomics over sheer variety.
The key difference is philosophy: Anbernic tries to cover every niche with multiple devices, while Retroid builds fewer, more powerful machines that aim to be your only handheld. This affects everything from software support to how often you need to upgrade.
How They Work: Operating Systems and Emulation
Anbernic devices come in two flavors: Linux-based (like the RG35XX Plus) and Android-based (like the RG556). Linux devices are simpler, boot directly into a game launcher, and are great for pick-up-and-play. Android devices give you access to the Google Play Store, meaning you can install apps like RetroArch, Dolphin, and even native Android games.
Retroid devices are all Android, which means you get the full Android experience out of the box. You can install any emulator from the Play Store, use cloud gaming apps like Xbox Game Pass or GeForce Now, and even stream games from your PC via Moonlight or Steam Link. The trade-off is that you need to do some initial setup to get emulators configured properly.
Performance Comparison: Which Plays More?
Performance is where Retroid generally wins. The Retroid Pocket 4 Pro uses a Unisoc T820 chip, which can handle most PlayStation 2 and GameCube games at full speed, and even some Nintendo Switch titles. Anbernic’s RG556 uses a Unisoc T618, which is weaker and struggles with the most demanding PS2 games, though it plays PSP, Dreamcast, and earlier consoles flawlessly.
Here’s a rough breakdown of what each brand can handle:
- Anbernic Linux models (RG35XX, RG40XXV): Up to PlayStation 1, SNES, Genesis, and GBA. No Android apps.
- Anbernic Android models (RG405M, RG556): Up to PSP, Dreamcast, and many PS2/GameCube games, but with occasional slowdowns on harder titles.
- Retroid Pocket 2S: Similar to Anbernic’s Android models, good for PSP and lighter PS2.
- Retroid Pocket 3+ and 4: Full PS2 and GameCube, plus some Switch and Vita emulation.
- Retroid Pocket 4 Pro: The most powerful, handling almost all PS2/GameCube and even some Switch games.
If you only want to play up to PS1, either brand works. If you want PS2 and GameCube, Retroid’s higher-end models are the safer bet.
Build Quality and Design
Anbernic has a reputation for solid, pocketable devices with good buttons and d-pads. Their metal-shell models like the RG405M feel premium but can be heavy. The RG35XX series is lightweight and cheap, but the plastic feels less durable. Anbernic also offers a wide variety of form factors, including horizontal, vertical, and clamshell designs.
Retroid devices are generally more ergonomic, with larger grips and better button placement for long sessions. The Pocket 4 Pro has hall-effect joysticks that resist drift, a feature that’s rare at this price. However, some early Retroid models had mushy buttons or loose hinges, though recent releases have improved.
Software and User Experience
Anbernic’s Linux devices come with a custom launcher that’s clean and simple, but you may want to install custom firmware like GarlicOS or Batocera for better features and performance. Android models run stock Android with a few pre-installed emulators, but you’ll likely want to set up your own frontend like Daijisho to get a console-like experience.
Retroid’s Android implementation is more polished, with a dedicated launcher that organizes your games and emulators. They also provide a setup guide on their website that walks you through installing emulators and BIOS files. If you’re not tech-savvy, Retroid’s out-of-box experience is easier to get running.
A common misconception is that Android handhelds are “plug and play.” In reality, you still need to source BIOS files and tweak settings for each emulator. Linux devices are simpler but less flexible.
Price and Value
Anbernic offers more budget options, with the RG35XX series starting around $50–$70. These are excellent for retro fans who want a cheap, dedicated device. Mid-range Android models like the RG405M cost around $150–$180. The RG556 is about $200.
Retroid’s lineup starts higher: the Pocket 2S is around $100, the Pocket 3+ is $150, and the Pocket 4 Pro is $200–$220. You’re paying more for performance, but the value is clear if you want to play PS2 and GameCube without spending $300+ on a high-end device like the AYN Odin.
Consider what you already own. If you have a powerful phone, you could just get a controller clip and use emulators. But a dedicated handheld offers better ergonomics and no battery drain on your phone.
Common Problems and How to Avoid Them
Both brands have their quirks. Anbernic Linux devices sometimes have poor screen brightness or battery life, depending on the model. Android devices from either brand can suffer from heat throttling during long sessions, so look for models with active cooling (like the Retroid Pocket 4 Pro).
Another issue is screen quality. Some Anbernic models use lower-resolution screens that make text look blurry. Retroid’s screens are generally sharper, but the Pocket 2S has a low-resolution screen that’s fine for retro games but not for Android apps.
To avoid problems, read recent reviews for the specific model you’re considering, as both brands iterate quickly and fix issues in newer revisions. Also, buy from reputable sellers like Amazon or the official stores, and check if the device has a warranty.
How to Choose: A Step-by-Step Guide
Follow these steps to pick the right handheld for you:
- List the consoles you want to play. If it’s only up to PS1, any device works. If PS2/GameCube, you need a higher-end model.
- Set your budget. Under $100, Anbernic’s Linux models are your best bet. $150–$220, consider Retroid or Anbernic’s Android models.
- Decide between Linux and Android. Linux is simpler, Android is more versatile.
- Check the form factor. Do you want a vertical Game Boy style or a horizontal console style? Anbernic has more options.
- Read reviews for the specific model. Look for issues with buttons, heat, and screen quality.
- Consider your willingness to tinker. If you want a plug-and-play experience, choose a Linux device or a Retroid with good setup guides.
Frequently Asked Questions
Can Anbernic play PS2 games?
Some Anbernic Android models like the RG556 can play many PS2 games, but performance varies. Lighter games like Persona 4 run well, while heavy ones like God of War may have slowdowns. For reliable PS2 emulation, choose a Retroid Pocket 4 Pro or higher.
Is Retroid better than Anbernic for Switch emulation?
Yes, Retroid’s higher-end models (Pocket 4 Pro) can run some lighter Switch games via Yuzu or Skyline, but it’s not guaranteed. Anbernic’s current models are not powerful enough for Switch. If Switch emulation is a priority, consider a more powerful device like the AYN Odin 2.
Do I need to provide BIOS files?
Yes, for most emulators you need BIOS files from the original consoles. These are not included with the devices for legal reasons. You can legally obtain BIOS files by dumping them from your own consoles, or you can find them online, though that may be in a legal gray area.
Which brand has better battery life?
It depends on the model. Anbernic’s Linux devices often last 6–8 hours because they use less power. Android devices from both brands typically last 4–6 hours. The Retroid Pocket 4 Pro has a 5000mAh battery, which is above average.
Can I use these handhelds to play Android games?
Yes, all Android models from both brands can run native Android games from the Play Store. The touchscreen works, but you’ll want to use the physical controls for games that support controllers. Linux models cannot run Android games.
Are there any monthly fees or subscriptions?
No, the devices themselves are free to use. However, if you want to stream games from your PC or use cloud gaming services, you may need a paid subscription like Xbox Game Pass Ultimate or GeForce Now, but that’s optional.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Car Trends Making Cars Worse: 7 Downsides
- Nostalgic Classic Games Revamped on G2A?
- Nvidia RTX 4000 Super GPUs: Full Specs & Buying Guide
- Photoshop vs Lightroom AI Features Compared
- DNF vs DNF5: Which Package Manager?
- Korean SUV Making BMW and Audi Owners Question Their Choices?